Intraoral laser welding: ultrastructural and mechanical analysis to compare laboratory laser and dental laser View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2010-05-02

AUTHORS

Carlo Fornaini, Francesca Passaretti, Elena Villa, Jean-Paul Rocca, Elisabetta Merigo, Paolo Vescovi, Marco Meleti, Maddalena Manfredi, Samir Nammour

ABSTRACT

The Nd:YAG laser has been used since 1970 in dental laboratories to weld metals on dental prostheses. Recently in several clinical cases, we have suggested that the Nd:YAG laser device commonly utilized in the dental office could be used to repair broken fixed, removable and orthodontic prostheses and to weld metals directly in the mouth. The aim of this work was to evaluate, using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and dynamic mechanical analysis (DMA), the quality of the weld and its mechanical strength, comparing a device normally used in dental laboratory and a device normally used in the dental office for oral surgery, the same as that described for intraoral welding. Metal plates of a Co-Cr-Mo dental alloy and steel orthodontic wires were subjected to four welding procedures: welding without filler metal using the laboratory laser, welding with filler metal using the laboratory laser, welding without filler metal using the office laser, and welding with filler metal using the office laser. The welded materials were then analysed by SEM, EDS and DMA. SEM analysis did not show significant differences between the samples although the plates welded using the office laser without filler metal showed a greater number of fissures than the other samples. EDS microanalysis of the welding zone showed a homogeneous composition of the metals. Mechanical tests showed similar elastic behaviours of the samples, with minimal differences between the samples welded with the two devices. No wire broke even under the maximum force applied by the analyser. This study seems to demonstrate that the welds produced using the office Nd:YAG laser device and the laboratory Nd:YAG laser device, as analysed by SEM, EDS and DMA, showed minimal and nonsignificant differences, although these findings need to be confirmed using a greater number of samples. More... »

PAGES

415-420

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/s10103-010-0788-7

DOI

http://dx.doi.org/10.1007/s10103-010-0788-7

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1004327711

PUBMED

https://www.ncbi.nlm.nih.gov/pubmed/20437262


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0910", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Manufacturing Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Dental Alloys", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Dental Instruments", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Dental Soldering", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Dentistry", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Equipment Failure Analysis", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Humans", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Lasers, Solid-State", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Welding", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "Laser Unit, Department of Dental Sciences, Faculty of Medicine, University of Li\u00e8ge, Li\u00e8ge, Belgium", 
          "id": "http://www.grid.ac/institutes/grid.4861.b", 
          "name": [
            "Oral Medicine and Laser-Assisted Surgery Unit, Dental School, Faculty of Medicine, University of Parma, Parma, Italy", 
            "Faculty of Dentistry, University of Nice \u201cSophia Antipolis\u201d, Nice, France", 
            "Laser Unit, Department of Dental Sciences, Faculty of Medicine, University of Li\u00e8ge, Li\u00e8ge, Belgium"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Fornaini", 
        "givenName": "Carlo", 
        "id": "sg:person.01247572253.75", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01247572253.75"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Italian National Research Council, Institute for Energetics and Interphases (CNR-IENI), Lecco, Italy", 
          "id": "http://www.grid.ac/institutes/grid.494651.b", 
          "name": [
            "Italian National Research Council, Institute for Energetics and Interphases (CNR-IENI), Lecco, Italy"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Passaretti", 
        "givenName": "Francesca", 
        "id": "sg:person.013376362301.48", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013376362301.48"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Italian National Research Council, Institute for Energetics and Interphases (CNR-IENI), Lecco, Italy", 
          "id": "http://www.grid.ac/institutes/grid.494651.b", 
          "name": [
            "Italian National Research Council, Institute for Energetics and Interphases (CNR-IENI), Lecco, Italy"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Villa", 
        "givenName": "Elena", 
        "id": "sg:person.012503365155.64", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012503365155.64"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Faculty of Dentistry, University of Nice \u201cSophia Antipolis\u201d, Nice, France", 
          "id": "http://www.grid.ac/institutes/grid.460782.f", 
          "name": [
            "Faculty of Dentistry, University of Nice \u201cSophia Antipolis\u201d, Nice, France"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Rocca", 
        "givenName": "Jean-Paul", 
        "id": "sg:person.0673627603.06", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.0673627603.06"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Oral Medicine and Laser-Assisted Surgery Unit, Dental School, Faculty of Medicine, University of Parma, Parma, Italy", 
          "id": "http://www.grid.ac/institutes/grid.10383.39", 
          "name": [
            "Oral Medicine and Laser-Assisted Surgery Unit, Dental School, Faculty of Medicine, University of Parma, Parma, Italy"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Merigo", 
        "givenName": "Elisabetta", 
        "id": "sg:person.01256747505.89", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01256747505.89"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Oral Medicine and Laser-Assisted Surgery Unit, Dental School, Faculty of Medicine, University of Parma, Parma, Italy", 
          "id": "http://www.grid.ac/institutes/grid.10383.39", 
          "name": [
            "Oral Medicine and Laser-Assisted Surgery Unit, Dental School, Faculty of Medicine, University of Parma, Parma, Italy"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Vescovi", 
        "givenName": "Paolo", 
        "id": "sg:person.01210634305.95", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01210634305.95"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Oral Medicine and Laser-Assisted Surgery Unit, Dental School, Faculty of Medicine, University of Parma, Parma, Italy", 
          "id": "http://www.grid.ac/institutes/grid.10383.39", 
          "name": [
            "Oral Medicine and Laser-Assisted Surgery Unit, Dental School, Faculty of Medicine, University of Parma, Parma, Italy"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Meleti", 
        "givenName": "Marco", 
        "id": "sg:person.01142704667.60", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01142704667.60"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Oral Medicine and Laser-Assisted Surgery Unit, Dental School, Faculty of Medicine, University of Parma, Parma, Italy", 
          "id": "http://www.grid.ac/institutes/grid.10383.39", 
          "name": [
            "Oral Medicine and Laser-Assisted Surgery Unit, Dental School, Faculty of Medicine, University of Parma, Parma, Italy"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Manfredi", 
        "givenName": "Maddalena", 
        "id": "sg:person.0746002345.66", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.0746002345.66"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Laser Unit, Department of Dental Sciences, Faculty of Medicine, University of Li\u00e8ge, Li\u00e8ge, Belgium", 
          "id": "http://www.grid.ac/institutes/grid.4861.b", 
          "name": [
            "Laser Unit, Department of Dental Sciences, Faculty of Medicine, University of Li\u00e8ge, Li\u00e8ge, Belgium"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Nammour", 
        "givenName": "Samir", 
        "id": "sg:person.01027217664.18", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01027217664.18"
        ], 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "sg:pub.10.1038/sj.bdj.4800942a", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1056646384", 
          "https://doi.org/10.1038/sj.bdj.4800942a"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1038/sj.bdj.4800942", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1048440916", 
          "https://doi.org/10.1038/sj.bdj.4800942"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s10103-009-0666-3", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1027541016", 
          "https://doi.org/10.1007/s10103-009-0666-3"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/978-1-4615-0215-9", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1018045315", 
          "https://doi.org/10.1007/978-1-4615-0215-9"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s10103-009-0702-3", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1021866816", 
          "https://doi.org/10.1007/s10103-009-0702-3"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/978-1-4757-6266-2", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1027662240", 
          "https://doi.org/10.1007/978-1-4757-6266-2"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "2010-05-02", 
    "datePublishedReg": "2010-05-02", 
    "description": "The Nd:YAG laser has been used since 1970 in dental laboratories to weld metals on dental prostheses. Recently in several clinical cases, we have suggested that the Nd:YAG laser device commonly utilized in the dental office could be used to repair broken fixed, removable and orthodontic prostheses and to weld metals directly in the mouth. The aim of this work was to evaluate, using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and dynamic mechanical analysis (DMA), the quality of the weld and its mechanical strength, comparing a device normally used in dental laboratory and a device normally used in the dental office for oral surgery, the same as that described for intraoral welding. Metal plates of a Co-Cr-Mo dental alloy and steel orthodontic wires were subjected to four welding procedures: welding without filler metal using the laboratory laser, welding with filler metal using the laboratory laser, welding without filler metal using the office laser, and welding with filler metal using the office laser. The welded materials were then analysed by SEM, EDS and DMA. SEM analysis did not show significant differences between the samples although the plates welded using the office laser without filler metal showed a greater number of fissures than the other samples. EDS microanalysis of the welding zone showed a homogeneous composition of the metals. Mechanical tests showed similar elastic behaviours of the samples, with minimal differences between the samples welded with the two devices. No wire broke even under the maximum force applied by the analyser. This study seems to demonstrate that the welds produced using the office Nd:YAG laser device and the laboratory Nd:YAG laser device, as analysed by SEM, EDS and DMA, showed minimal and nonsignificant differences, although these findings need to be confirmed using a greater number of samples.", 
    "genre": "article", 
    "id": "sg:pub.10.1007/s10103-010-0788-7", 
    "inLanguage": "en", 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1096630", 
        "issn": [
          "0268-8921", 
          "1435-604X"
        ], 
        "name": "Lasers in Medical Science", 
        "publisher": "Springer Nature", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "4", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "26"
      }
    ], 
    "keywords": [
      "dynamic mechanical analysis", 
      "filler metal", 
      "mechanical analysis", 
      "laser devices", 
      "similar elastic behavior", 
      "welded materials", 
      "Mo dental alloy", 
      "welding zone", 
      "welding procedure", 
      "laboratory lasers", 
      "mechanical tests", 
      "energy dispersive X", 
      "mechanical strength", 
      "Co-Cr", 
      "elastic behavior", 
      "welding", 
      "metal plate", 
      "orthodontic wires", 
      "orthodontic prosthesis", 
      "dental alloys", 
      "EDS microanalysis", 
      "intraoral welding", 
      "welds", 
      "dispersive X", 
      "ray spectroscopy", 
      "SEM analysis", 
      "devices", 
      "electron microscopy", 
      "maximum force", 
      "EDS", 
      "metals", 
      "wire", 
      "SEM", 
      "laser", 
      "homogeneous composition", 
      "dental prostheses", 
      "plate", 
      "dental laboratory", 
      "YAG laser", 
      "alloy", 
      "Nd", 
      "dental lasers", 
      "strength", 
      "materials", 
      "prosthesis", 
      "force", 
      "office laser", 
      "microscopy", 
      "analyzer", 
      "YAG laser device", 
      "microanalysis", 
      "spectroscopy", 
      "zone", 
      "behavior", 
      "laboratory", 
      "samples", 
      "analysis", 
      "work", 
      "test", 
      "composition", 
      "number", 
      "quality", 
      "procedure", 
      "minimal differences", 
      "fissures", 
      "greater number", 
      "cases", 
      "differences", 
      "study", 
      "mouth", 
      "aim", 
      "office", 
      "dental office", 
      "oral surgery", 
      "significant differences", 
      "clinical cases", 
      "findings", 
      "surgery", 
      "nonsignificant difference", 
      "steel orthodontic wires", 
      "office Nd", 
      "laboratory Nd"
    ], 
    "name": "Intraoral laser welding: ultrastructural and mechanical analysis to compare laboratory laser and dental laser", 
    "pagination": "415-420", 
    "productId": [
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1004327711"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/s10103-010-0788-7"
        ]
      }, 
      {
        "name": "pubmed_id", 
        "type": "PropertyValue", 
        "value": [
          "20437262"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/s10103-010-0788-7", 
      "https://app.dimensions.ai/details/publication/pub.1004327711"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2022-01-01T18:22", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-springernature-scigraph/baseset/20220101/entities/gbq_results/article/article_510.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "https://doi.org/10.1007/s10103-010-0788-7"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s10103-010-0788-7'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s10103-010-0788-7'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s10103-010-0788-7'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s10103-010-0788-7'


 

This table displays all metadata directly associated to this object as RDF triples.

267 TRIPLES      22 PREDICATES      122 URIs      108 LITERALS      15 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/s10103-010-0788-7 schema:about N1a9c0c14437b4d4786bdfc5cadcc6122
2 N34ca75aff6fb4ad3bdc334cf64d04c26
3 N369df59421ac4740b8eafb1aea61f4a3
4 N47583a8f145a455b859b8baa11f2078c
5 N603a6313ac5e44d8a6a36e62c5890f76
6 Na1a47c06e86945f5b27e22e2419fce70
7 Nb35bae175b8a47c8bb58c1a0d55a66fe
8 Nffc9bd6214e145d6a4d79ead4eab4359
9 anzsrc-for:09
10 anzsrc-for:0910
11 schema:author N12d51ba3148a4e83bdc13667ca61bfba
12 schema:citation sg:pub.10.1007/978-1-4615-0215-9
13 sg:pub.10.1007/978-1-4757-6266-2
14 sg:pub.10.1007/s10103-009-0666-3
15 sg:pub.10.1007/s10103-009-0702-3
16 sg:pub.10.1038/sj.bdj.4800942
17 sg:pub.10.1038/sj.bdj.4800942a
18 schema:datePublished 2010-05-02
19 schema:datePublishedReg 2010-05-02
20 schema:description The Nd:YAG laser has been used since 1970 in dental laboratories to weld metals on dental prostheses. Recently in several clinical cases, we have suggested that the Nd:YAG laser device commonly utilized in the dental office could be used to repair broken fixed, removable and orthodontic prostheses and to weld metals directly in the mouth. The aim of this work was to evaluate, using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and dynamic mechanical analysis (DMA), the quality of the weld and its mechanical strength, comparing a device normally used in dental laboratory and a device normally used in the dental office for oral surgery, the same as that described for intraoral welding. Metal plates of a Co-Cr-Mo dental alloy and steel orthodontic wires were subjected to four welding procedures: welding without filler metal using the laboratory laser, welding with filler metal using the laboratory laser, welding without filler metal using the office laser, and welding with filler metal using the office laser. The welded materials were then analysed by SEM, EDS and DMA. SEM analysis did not show significant differences between the samples although the plates welded using the office laser without filler metal showed a greater number of fissures than the other samples. EDS microanalysis of the welding zone showed a homogeneous composition of the metals. Mechanical tests showed similar elastic behaviours of the samples, with minimal differences between the samples welded with the two devices. No wire broke even under the maximum force applied by the analyser. This study seems to demonstrate that the welds produced using the office Nd:YAG laser device and the laboratory Nd:YAG laser device, as analysed by SEM, EDS and DMA, showed minimal and nonsignificant differences, although these findings need to be confirmed using a greater number of samples.
21 schema:genre article
22 schema:inLanguage en
23 schema:isAccessibleForFree false
24 schema:isPartOf N68c59620c6d248dd94236b24208b962a
25 Nd6fdf5ca57294b21ab28ccd8751bfe5e
26 sg:journal.1096630
27 schema:keywords Co-Cr
28 EDS
29 EDS microanalysis
30 Mo dental alloy
31 Nd
32 SEM
33 SEM analysis
34 YAG laser
35 YAG laser device
36 aim
37 alloy
38 analysis
39 analyzer
40 behavior
41 cases
42 clinical cases
43 composition
44 dental alloys
45 dental laboratory
46 dental lasers
47 dental office
48 dental prostheses
49 devices
50 differences
51 dispersive X
52 dynamic mechanical analysis
53 elastic behavior
54 electron microscopy
55 energy dispersive X
56 filler metal
57 findings
58 fissures
59 force
60 greater number
61 homogeneous composition
62 intraoral welding
63 laboratory
64 laboratory Nd
65 laboratory lasers
66 laser
67 laser devices
68 materials
69 maximum force
70 mechanical analysis
71 mechanical strength
72 mechanical tests
73 metal plate
74 metals
75 microanalysis
76 microscopy
77 minimal differences
78 mouth
79 nonsignificant difference
80 number
81 office
82 office Nd
83 office laser
84 oral surgery
85 orthodontic prosthesis
86 orthodontic wires
87 plate
88 procedure
89 prosthesis
90 quality
91 ray spectroscopy
92 samples
93 significant differences
94 similar elastic behavior
95 spectroscopy
96 steel orthodontic wires
97 strength
98 study
99 surgery
100 test
101 welded materials
102 welding
103 welding procedure
104 welding zone
105 welds
106 wire
107 work
108 zone
109 schema:name Intraoral laser welding: ultrastructural and mechanical analysis to compare laboratory laser and dental laser
110 schema:pagination 415-420
111 schema:productId N0d60ffacf0e64d13a74ac940ad3b3453
112 N305cd1c78efb40d2b3e76672168f98f8
113 Nebbadcd4ce3f494898624cceb3f92225
114 schema:sameAs https://app.dimensions.ai/details/publication/pub.1004327711
115 https://doi.org/10.1007/s10103-010-0788-7
116 schema:sdDatePublished 2022-01-01T18:22
117 schema:sdLicense https://scigraph.springernature.com/explorer/license/
118 schema:sdPublisher Nd015927cf0864905b258392c5709daca
119 schema:url https://doi.org/10.1007/s10103-010-0788-7
120 sgo:license sg:explorer/license/
121 sgo:sdDataset articles
122 rdf:type schema:ScholarlyArticle
123 N0d60ffacf0e64d13a74ac940ad3b3453 schema:name dimensions_id
124 schema:value pub.1004327711
125 rdf:type schema:PropertyValue
126 N1065617b993d4fe9a7840a744716b304 rdf:first sg:person.012503365155.64
127 rdf:rest Ncfdb6239ec974312aba187758fd06400
128 N12d51ba3148a4e83bdc13667ca61bfba rdf:first sg:person.01247572253.75
129 rdf:rest Nb8f10a144f784ae7b90091ec96f68976
130 N1a9c0c14437b4d4786bdfc5cadcc6122 schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
131 schema:name Equipment Failure Analysis
132 rdf:type schema:DefinedTerm
133 N29810ec809c34a379901d36eb8840940 rdf:first sg:person.01027217664.18
134 rdf:rest rdf:nil
135 N305cd1c78efb40d2b3e76672168f98f8 schema:name pubmed_id
136 schema:value 20437262
137 rdf:type schema:PropertyValue
138 N34ca75aff6fb4ad3bdc334cf64d04c26 schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
139 schema:name Dental Soldering
140 rdf:type schema:DefinedTerm
141 N369df59421ac4740b8eafb1aea61f4a3 schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
142 schema:name Dental Alloys
143 rdf:type schema:DefinedTerm
144 N4430f850c61a4d42b1bb65a62a8e7d78 rdf:first sg:person.01256747505.89
145 rdf:rest Nbb875e17a7e34996a586465009f95e52
146 N47583a8f145a455b859b8baa11f2078c schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
147 schema:name Dentistry
148 rdf:type schema:DefinedTerm
149 N5fdfd87ca9ed4740bbb59ec08e98e611 rdf:first sg:person.0746002345.66
150 rdf:rest N29810ec809c34a379901d36eb8840940
151 N603a6313ac5e44d8a6a36e62c5890f76 schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
152 schema:name Humans
153 rdf:type schema:DefinedTerm
154 N68c59620c6d248dd94236b24208b962a schema:issueNumber 4
155 rdf:type schema:PublicationIssue
156 N75e7242ff1ea4d9cbfc029d64510576a rdf:first sg:person.01142704667.60
157 rdf:rest N5fdfd87ca9ed4740bbb59ec08e98e611
158 Na1a47c06e86945f5b27e22e2419fce70 schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
159 schema:name Welding
160 rdf:type schema:DefinedTerm
161 Nb35bae175b8a47c8bb58c1a0d55a66fe schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
162 schema:name Lasers, Solid-State
163 rdf:type schema:DefinedTerm
164 Nb8f10a144f784ae7b90091ec96f68976 rdf:first sg:person.013376362301.48
165 rdf:rest N1065617b993d4fe9a7840a744716b304
166 Nbb875e17a7e34996a586465009f95e52 rdf:first sg:person.01210634305.95
167 rdf:rest N75e7242ff1ea4d9cbfc029d64510576a
168 Ncfdb6239ec974312aba187758fd06400 rdf:first sg:person.0673627603.06
169 rdf:rest N4430f850c61a4d42b1bb65a62a8e7d78
170 Nd015927cf0864905b258392c5709daca schema:name Springer Nature - SN SciGraph project
171 rdf:type schema:Organization
172 Nd6fdf5ca57294b21ab28ccd8751bfe5e schema:volumeNumber 26
173 rdf:type schema:PublicationVolume
174 Nebbadcd4ce3f494898624cceb3f92225 schema:name doi
175 schema:value 10.1007/s10103-010-0788-7
176 rdf:type schema:PropertyValue
177 Nffc9bd6214e145d6a4d79ead4eab4359 schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
178 schema:name Dental Instruments
179 rdf:type schema:DefinedTerm
180 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
181 schema:name Engineering
182 rdf:type schema:DefinedTerm
183 anzsrc-for:0910 schema:inDefinedTermSet anzsrc-for:
184 schema:name Manufacturing Engineering
185 rdf:type schema:DefinedTerm
186 sg:journal.1096630 schema:issn 0268-8921
187 1435-604X
188 schema:name Lasers in Medical Science
189 schema:publisher Springer Nature
190 rdf:type schema:Periodical
191 sg:person.01027217664.18 schema:affiliation grid-institutes:grid.4861.b
192 schema:familyName Nammour
193 schema:givenName Samir
194 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01027217664.18
195 rdf:type schema:Person
196 sg:person.01142704667.60 schema:affiliation grid-institutes:grid.10383.39
197 schema:familyName Meleti
198 schema:givenName Marco
199 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01142704667.60
200 rdf:type schema:Person
201 sg:person.01210634305.95 schema:affiliation grid-institutes:grid.10383.39
202 schema:familyName Vescovi
203 schema:givenName Paolo
204 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01210634305.95
205 rdf:type schema:Person
206 sg:person.01247572253.75 schema:affiliation grid-institutes:grid.4861.b
207 schema:familyName Fornaini
208 schema:givenName Carlo
209 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01247572253.75
210 rdf:type schema:Person
211 sg:person.012503365155.64 schema:affiliation grid-institutes:grid.494651.b
212 schema:familyName Villa
213 schema:givenName Elena
214 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012503365155.64
215 rdf:type schema:Person
216 sg:person.01256747505.89 schema:affiliation grid-institutes:grid.10383.39
217 schema:familyName Merigo
218 schema:givenName Elisabetta
219 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01256747505.89
220 rdf:type schema:Person
221 sg:person.013376362301.48 schema:affiliation grid-institutes:grid.494651.b
222 schema:familyName Passaretti
223 schema:givenName Francesca
224 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013376362301.48
225 rdf:type schema:Person
226 sg:person.0673627603.06 schema:affiliation grid-institutes:grid.460782.f
227 schema:familyName Rocca
228 schema:givenName Jean-Paul
229 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.0673627603.06
230 rdf:type schema:Person
231 sg:person.0746002345.66 schema:affiliation grid-institutes:grid.10383.39
232 schema:familyName Manfredi
233 schema:givenName Maddalena
234 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.0746002345.66
235 rdf:type schema:Person
236 sg:pub.10.1007/978-1-4615-0215-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1018045315
237 https://doi.org/10.1007/978-1-4615-0215-9
238 rdf:type schema:CreativeWork
239 sg:pub.10.1007/978-1-4757-6266-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1027662240
240 https://doi.org/10.1007/978-1-4757-6266-2
241 rdf:type schema:CreativeWork
242 sg:pub.10.1007/s10103-009-0666-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1027541016
243 https://doi.org/10.1007/s10103-009-0666-3
244 rdf:type schema:CreativeWork
245 sg:pub.10.1007/s10103-009-0702-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1021866816
246 https://doi.org/10.1007/s10103-009-0702-3
247 rdf:type schema:CreativeWork
248 sg:pub.10.1038/sj.bdj.4800942 schema:sameAs https://app.dimensions.ai/details/publication/pub.1048440916
249 https://doi.org/10.1038/sj.bdj.4800942
250 rdf:type schema:CreativeWork
251 sg:pub.10.1038/sj.bdj.4800942a schema:sameAs https://app.dimensions.ai/details/publication/pub.1056646384
252 https://doi.org/10.1038/sj.bdj.4800942a
253 rdf:type schema:CreativeWork
254 grid-institutes:grid.10383.39 schema:alternateName Oral Medicine and Laser-Assisted Surgery Unit, Dental School, Faculty of Medicine, University of Parma, Parma, Italy
255 schema:name Oral Medicine and Laser-Assisted Surgery Unit, Dental School, Faculty of Medicine, University of Parma, Parma, Italy
256 rdf:type schema:Organization
257 grid-institutes:grid.460782.f schema:alternateName Faculty of Dentistry, University of Nice “Sophia Antipolis”, Nice, France
258 schema:name Faculty of Dentistry, University of Nice “Sophia Antipolis”, Nice, France
259 rdf:type schema:Organization
260 grid-institutes:grid.4861.b schema:alternateName Laser Unit, Department of Dental Sciences, Faculty of Medicine, University of Liège, Liège, Belgium
261 schema:name Faculty of Dentistry, University of Nice “Sophia Antipolis”, Nice, France
262 Laser Unit, Department of Dental Sciences, Faculty of Medicine, University of Liège, Liège, Belgium
263 Oral Medicine and Laser-Assisted Surgery Unit, Dental School, Faculty of Medicine, University of Parma, Parma, Italy
264 rdf:type schema:Organization
265 grid-institutes:grid.494651.b schema:alternateName Italian National Research Council, Institute for Energetics and Interphases (CNR-IENI), Lecco, Italy
266 schema:name Italian National Research Council, Institute for Energetics and Interphases (CNR-IENI), Lecco, Italy
267 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...