Reliability analysis of jointed rock slope considering uncertainty in peak and residual strength parameters View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2019-03

AUTHORS

Gaurav Tiwari, Gali Madhavi Latha

ABSTRACT

Stability analysis of rock slopes is a complex problem because of uncertainties involved in the rock mass properties. The probabilistic approach is a rational way to deal with these uncertainties. This article investigates the stability of a rock slope by deterministic and probabilistic approaches by considering uncertainty in peak and residual strength parameters and strength-drop in stress-strain behavior of the rock mass. A Geological Strength Index (GSI) based on a quantitative approach was used to estimate the statistical parameters of peak and residual strength parameters. Reliability index of the slope was then estimated using Hong’s Point Estimate Method coupled with the finite element method. The approach is demonstrated using an important case study of a Himalayan rock slope supporting the piers of the world’s highest railway bridge. It was observed that the factor of safety and reliability index for the slope was highly sensitive to residual strength parameters, and; hence, ignoring strength-drop from the rock mass behavior and uncertainty in residual strength parameters can overestimate the factor of safety and the reliability index of rock slopes. A parametric study is carried out to evaluate the influence of the coefficient of variation of uniaxial compressive strength of intact rock, the Hoek-Brown strength parameter of intact rock, roughness and alteration parameters of the joints on the probability of failure and the reliability index. The approach is verified by comparing the estimated displacements along the slope with in-situ measured displacements observed during field monitoring over the years. The approach used can be extended to the rock slopes or rock slides where high displacements in the slopes are expected due to triggering forces like seismic forces, excavation or structural loads. More... »

PAGES

913-930

References to SciGraph publications

  • 2017-04. Effect of gravel content on creep behavior of clayey soil at residual state: implication for its role in slow-moving landslides in LANDSLIDES
  • 2000-10. Mechanical Tests on Pervasively Jointed Rock Material: Insight into Rock Mass Behaviour in ROCK MECHANICS AND ROCK ENGINEERING
  • 2014-11. Strength of an Australian Coal Under Low Confinement in ROCK MECHANICS AND ROCK ENGINEERING
  • 2012-07. Experimental Investigation on the Strength, Deformability, Failure Behavior and Acoustic Emission Locations of Red Sandstone Under Triaxial Compression in ROCK MECHANICS AND ROCK ENGINEERING
  • 2016-06. Design of Rock Slope Reinforcement: An Himalayan Case Study in ROCK MECHANICS AND ROCK ENGINEERING
  • 2006-08. Deformability characteristics of a rock mass under true-triaxial stress compression in GEOTECHNICAL AND GEOLOGICAL ENGINEERING
  • 1970-12. Determination of the post-failure behavior of brittle rock using a servo-controlled testing machine in ROCK MECHANICS FELSMECHANIK MECANIQUE DES ROCHES
  • 2010-11. Seismic Stability Analysis of a Himalayan Rock Slope in ROCK MECHANICS AND ROCK ENGINEERING
  • 1971-06. Post-failure behavior of a granite and diabase in ROCK MECHANICS FELSMECHANIK MECANIQUE DES ROCHES
  • 2003-02. Role of slope reliability analysis in landslide risk management in BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT
  • 2003-04. A Methodology for Reliability-Based Design of Rock Slopes in ROCK MECHANICS AND ROCK ENGINEERING
  • 2009-10. Probabilistic Stability Evaluation of Oppstadhornet Rock Slope, Norway in ROCK MECHANICS AND ROCK ENGINEERING
  • 2012-03. Earthquake Stability Analysis of Rock Slopes: a Case Study in ROCK MECHANICS AND ROCK ENGINEERING
  • 2015-05. A Laboratory-Testing-Based Study on the Strength, Deformability, and Dilatancy of Carbonate Rocks at Low Confinement in ROCK MECHANICS AND ROCK ENGINEERING
  • 1994-09. A review of techniques for parameter sensitivity analysis of environmental models in ENVIRONMENTAL MONITORING AND ASSESSMENT
  • 2015-01. Relationship Between Pre-failure and Post-failure Mechanical Properties of Rock Material of Different Origin in ROCK MECHANICS AND ROCK ENGINEERING
  • 2015-08. Residual strength and creep behaviour on the slip surface of specimens of a landslide in marine origin clay shales: influence of pore fluid composition in LANDSLIDES
  • 1971-12. Optimizing the control of rock failure in servo-controlled laboratory tests in ROCK MECHANICS FELSMECHANIK MECANIQUE DES ROCHES
  • 2011-07. Rock Mass Characterization and Rock Property Variability Considerations for Tunnel and Cavern Design in ROCK MECHANICS AND ROCK ENGINEERING
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s10064-017-1141-1

    DOI

    http://dx.doi.org/10.1007/s10064-017-1141-1

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1091211961


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0914", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Resources Engineering and Extractive Metallurgy", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "Indian Institute of Science Bangalore", 
              "id": "https://www.grid.ac/institutes/grid.34980.36", 
              "name": [
                "Department of Civil Engineering, Indian Institute of Science, Bangalore, India"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Tiwari", 
            "givenName": "Gaurav", 
            "id": "sg:person.013005700521.41", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013005700521.41"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Indian Institute of Science Bangalore", 
              "id": "https://www.grid.ac/institutes/grid.34980.36", 
              "name": [
                "Department of Civil Engineering, Indian Institute of Science, Bangalore, India"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Latha", 
            "givenName": "Gali Madhavi", 
            "id": "sg:person.011674327623.36", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011674327623.36"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "sg:pub.10.1007/s00603-008-0011-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1000790963", 
              "https://doi.org/10.1007/s00603-008-0011-3"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00603-008-0011-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1000790963", 
              "https://doi.org/10.1007/s00603-008-0011-3"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.ijrmms.2005.06.005", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1004139961"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.ijrmms.2012.12.034", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1005583416"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1365-1609(03)00076-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1006063981"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1365-1609(03)00076-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1006063981"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1139/t07-030", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1007155757"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.ijrmms.2014.04.001", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1008834669"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00603-014-0549-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1012124961", 
              "https://doi.org/10.1007/s00603-014-0549-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s10346-016-0709-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1012742653", 
              "https://doi.org/10.1007/s10346-016-0709-3"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.tust.2015.05.003", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1013323638"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1365-1609(03)00025-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1014206165"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1365-1609(03)00025-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1014206165"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.ijrmms.2015.10.013", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1014344487"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00603-002-0034-0", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1014942090", 
              "https://doi.org/10.1007/s00603-002-0034-0"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.ijrmms.2013.02.007", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1015311999"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf00547132", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1015487151", 
              "https://doi.org/10.1007/bf00547132"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf00547132", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1015487151", 
              "https://doi.org/10.1007/bf00547132"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0148-9062(99)00043-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1015734595"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00603-011-0145-6", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1016166253", 
              "https://doi.org/10.1007/s00603-011-0145-6"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00603-010-0088-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1018530739", 
              "https://doi.org/10.1007/s00603-010-0088-3"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00603-010-0088-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1018530739", 
              "https://doi.org/10.1007/s00603-010-0088-3"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00603-016-0913-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1019808653", 
              "https://doi.org/10.1007/s00603-016-0913-4"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s006030070002", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1019830617", 
              "https://doi.org/10.1007/s006030070002"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0148-9062(85)93227-9", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1022163516"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0148-9062(85)93227-9", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1022163516"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1365-1609(98)80024-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1024958863"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s10706-005-4431-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027527338", 
              "https://doi.org/10.1007/s10706-005-4431-5"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf01245574", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027836654", 
              "https://doi.org/10.1007/bf01245574"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jsg.2016.02.010", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027894881"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf01239627", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1030668189", 
              "https://doi.org/10.1007/bf01239627"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00603-011-0208-8", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1034179739", 
              "https://doi.org/10.1007/s00603-011-0208-8"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0148-9062(78)91470-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1035520076"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0148-9062(78)91470-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1035520076"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0148-9062(89)90936-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1036081662"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0148-9062(89)90936-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1036081662"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.enggeo.2009.11.006", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1036347263"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0013-7952(94)90029-9", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1037324667"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0013-7952(94)90029-9", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1037324667"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00603-013-0493-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1038677016", 
              "https://doi.org/10.1007/s00603-013-0493-5"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00603-011-0138-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1040526385", 
              "https://doi.org/10.1007/s00603-011-0138-5"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s10346-014-0511-z", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1040680135", 
              "https://doi.org/10.1007/s10346-014-0511-z"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.compgeo.2015.06.016", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1041078985"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.ijrmms.2003.12.073", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1041849751"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf01238181", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1044793694", 
              "https://doi.org/10.1007/bf01238181"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf01238181", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1044793694", 
              "https://doi.org/10.1007/bf01238181"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.compgeo.2012.05.010", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1045827497"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1365-1609(97)80069-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1047244099"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.enggeo.2006.01.001", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1047947899"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.ijrmms.2006.07.005", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1048844515"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0148-9062(70)90007-0", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1049422877"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0148-9062(70)90007-0", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1049422877"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00603-014-0631-8", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1050586004", 
              "https://doi.org/10.1007/s00603-014-0631-8"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0951-8320(97)00071-9", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1051438223"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1061/(asce)0733-9399(2001)127:12(1240)", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1057583854"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1061/(asce)1090-0241(2005)131:11(1423)", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1057618953"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1520/jte12072j", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1067621791"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1680/geot.1964.14.2.77", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1068209018"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1680/geot.1985.35.1.3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1068210049"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s10064-002-0166-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1085140986", 
              "https://doi.org/10.1007/s10064-002-0166-1"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2019-03", 
        "datePublishedReg": "2019-03-01", 
        "description": "Stability analysis of rock slopes is a complex problem because of uncertainties involved in the rock mass properties. The probabilistic approach is a rational way to deal with these uncertainties. This article investigates the stability of a rock slope by deterministic and probabilistic approaches by considering uncertainty in peak and residual strength parameters and strength-drop in stress-strain behavior of the rock mass. A Geological Strength Index (GSI) based on a quantitative approach was used to estimate the statistical parameters of peak and residual strength parameters. Reliability index of the slope was then estimated using Hong\u2019s Point Estimate Method coupled with the finite element method. The approach is demonstrated using an important case study of a Himalayan rock slope supporting the piers of the world\u2019s highest railway bridge. It was observed that the factor of safety and reliability index for the slope was highly sensitive to residual strength parameters, and; hence, ignoring strength-drop from the rock mass behavior and uncertainty in residual strength parameters can overestimate the factor of safety and the reliability index of rock slopes. A parametric study is carried out to evaluate the influence of the coefficient of variation of uniaxial compressive strength of intact rock, the Hoek-Brown strength parameter of intact rock, roughness and alteration parameters of the joints on the probability of failure and the reliability index. The approach is verified by comparing the estimated displacements along the slope with in-situ measured displacements observed during field monitoring over the years. The approach used can be extended to the rock slopes or rock slides where high displacements in the slopes are expected due to triggering forces like seismic forces, excavation or structural loads.", 
        "genre": "research_article", 
        "id": "sg:pub.10.1007/s10064-017-1141-1", 
        "inLanguage": [
          "en"
        ], 
        "isAccessibleForFree": false, 
        "isPartOf": [
          {
            "id": "sg:journal.1136592", 
            "issn": [
              "1435-9529", 
              "1435-9537"
            ], 
            "name": "Bulletin of Engineering Geology and the Environment", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "2", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "78"
          }
        ], 
        "name": "Reliability analysis of jointed rock slope considering uncertainty in peak and residual strength parameters", 
        "pagination": "913-930", 
        "productId": [
          {
            "name": "readcube_id", 
            "type": "PropertyValue", 
            "value": [
              "365fbaf29cfe3598d57a70216539d2783056de73b32cbc33c53fff7d3ee6861e"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s10064-017-1141-1"
            ]
          }, 
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1091211961"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s10064-017-1141-1", 
          "https://app.dimensions.ai/details/publication/pub.1091211961"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2019-04-11T12:53", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000364_0000000364/records_72856_00000000.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "https://link.springer.com/10.1007%2Fs10064-017-1141-1"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s10064-017-1141-1'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s10064-017-1141-1'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s10064-017-1141-1'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s10064-017-1141-1'


     

    This table displays all metadata directly associated to this object as RDF triples.

    234 TRIPLES      21 PREDICATES      76 URIs      19 LITERALS      7 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s10064-017-1141-1 schema:about anzsrc-for:09
    2 anzsrc-for:0914
    3 schema:author N7c866c851a524021a648de3e08fc44f4
    4 schema:citation sg:pub.10.1007/bf00547132
    5 sg:pub.10.1007/bf01238181
    6 sg:pub.10.1007/bf01239627
    7 sg:pub.10.1007/bf01245574
    8 sg:pub.10.1007/s00603-002-0034-0
    9 sg:pub.10.1007/s00603-008-0011-3
    10 sg:pub.10.1007/s00603-010-0088-3
    11 sg:pub.10.1007/s00603-011-0138-5
    12 sg:pub.10.1007/s00603-011-0145-6
    13 sg:pub.10.1007/s00603-011-0208-8
    14 sg:pub.10.1007/s00603-013-0493-5
    15 sg:pub.10.1007/s00603-014-0549-1
    16 sg:pub.10.1007/s00603-014-0631-8
    17 sg:pub.10.1007/s00603-016-0913-4
    18 sg:pub.10.1007/s006030070002
    19 sg:pub.10.1007/s10064-002-0166-1
    20 sg:pub.10.1007/s10346-014-0511-z
    21 sg:pub.10.1007/s10346-016-0709-3
    22 sg:pub.10.1007/s10706-005-4431-5
    23 https://doi.org/10.1016/0013-7952(94)90029-9
    24 https://doi.org/10.1016/0148-9062(70)90007-0
    25 https://doi.org/10.1016/0148-9062(78)91470-5
    26 https://doi.org/10.1016/0148-9062(85)93227-9
    27 https://doi.org/10.1016/0148-9062(89)90936-4
    28 https://doi.org/10.1016/j.compgeo.2012.05.010
    29 https://doi.org/10.1016/j.compgeo.2015.06.016
    30 https://doi.org/10.1016/j.enggeo.2006.01.001
    31 https://doi.org/10.1016/j.enggeo.2009.11.006
    32 https://doi.org/10.1016/j.ijrmms.2003.12.073
    33 https://doi.org/10.1016/j.ijrmms.2005.06.005
    34 https://doi.org/10.1016/j.ijrmms.2006.07.005
    35 https://doi.org/10.1016/j.ijrmms.2012.12.034
    36 https://doi.org/10.1016/j.ijrmms.2013.02.007
    37 https://doi.org/10.1016/j.ijrmms.2014.04.001
    38 https://doi.org/10.1016/j.ijrmms.2015.10.013
    39 https://doi.org/10.1016/j.jsg.2016.02.010
    40 https://doi.org/10.1016/j.tust.2015.05.003
    41 https://doi.org/10.1016/s0148-9062(99)00043-1
    42 https://doi.org/10.1016/s0951-8320(97)00071-9
    43 https://doi.org/10.1016/s1365-1609(03)00025-x
    44 https://doi.org/10.1016/s1365-1609(03)00076-5
    45 https://doi.org/10.1016/s1365-1609(97)80069-x
    46 https://doi.org/10.1016/s1365-1609(98)80024-5
    47 https://doi.org/10.1061/(asce)0733-9399(2001)127:12(1240)
    48 https://doi.org/10.1061/(asce)1090-0241(2005)131:11(1423)
    49 https://doi.org/10.1139/t07-030
    50 https://doi.org/10.1520/jte12072j
    51 https://doi.org/10.1680/geot.1964.14.2.77
    52 https://doi.org/10.1680/geot.1985.35.1.3
    53 schema:datePublished 2019-03
    54 schema:datePublishedReg 2019-03-01
    55 schema:description Stability analysis of rock slopes is a complex problem because of uncertainties involved in the rock mass properties. The probabilistic approach is a rational way to deal with these uncertainties. This article investigates the stability of a rock slope by deterministic and probabilistic approaches by considering uncertainty in peak and residual strength parameters and strength-drop in stress-strain behavior of the rock mass. A Geological Strength Index (GSI) based on a quantitative approach was used to estimate the statistical parameters of peak and residual strength parameters. Reliability index of the slope was then estimated using Hong’s Point Estimate Method coupled with the finite element method. The approach is demonstrated using an important case study of a Himalayan rock slope supporting the piers of the world’s highest railway bridge. It was observed that the factor of safety and reliability index for the slope was highly sensitive to residual strength parameters, and; hence, ignoring strength-drop from the rock mass behavior and uncertainty in residual strength parameters can overestimate the factor of safety and the reliability index of rock slopes. A parametric study is carried out to evaluate the influence of the coefficient of variation of uniaxial compressive strength of intact rock, the Hoek-Brown strength parameter of intact rock, roughness and alteration parameters of the joints on the probability of failure and the reliability index. The approach is verified by comparing the estimated displacements along the slope with in-situ measured displacements observed during field monitoring over the years. The approach used can be extended to the rock slopes or rock slides where high displacements in the slopes are expected due to triggering forces like seismic forces, excavation or structural loads.
    56 schema:genre research_article
    57 schema:inLanguage en
    58 schema:isAccessibleForFree false
    59 schema:isPartOf Naf2e00362a344cd1bc1a30b355b9c48f
    60 Ne4490e56c28448f1b227ca67b34d219b
    61 sg:journal.1136592
    62 schema:name Reliability analysis of jointed rock slope considering uncertainty in peak and residual strength parameters
    63 schema:pagination 913-930
    64 schema:productId N06fad7c3e4134d44a25bfdbe259373fb
    65 Naa97e12bac0c417e9f3e75ba721fcd55
    66 Nb3b62699aa664327a9351c412458fbd5
    67 schema:sameAs https://app.dimensions.ai/details/publication/pub.1091211961
    68 https://doi.org/10.1007/s10064-017-1141-1
    69 schema:sdDatePublished 2019-04-11T12:53
    70 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    71 schema:sdPublisher N82c37fc7382f4db4b475366a8f3c94c4
    72 schema:url https://link.springer.com/10.1007%2Fs10064-017-1141-1
    73 sgo:license sg:explorer/license/
    74 sgo:sdDataset articles
    75 rdf:type schema:ScholarlyArticle
    76 N06fad7c3e4134d44a25bfdbe259373fb schema:name doi
    77 schema:value 10.1007/s10064-017-1141-1
    78 rdf:type schema:PropertyValue
    79 N623b4107c9a3439bb674591dbf09e38f rdf:first sg:person.011674327623.36
    80 rdf:rest rdf:nil
    81 N7c866c851a524021a648de3e08fc44f4 rdf:first sg:person.013005700521.41
    82 rdf:rest N623b4107c9a3439bb674591dbf09e38f
    83 N82c37fc7382f4db4b475366a8f3c94c4 schema:name Springer Nature - SN SciGraph project
    84 rdf:type schema:Organization
    85 Naa97e12bac0c417e9f3e75ba721fcd55 schema:name dimensions_id
    86 schema:value pub.1091211961
    87 rdf:type schema:PropertyValue
    88 Naf2e00362a344cd1bc1a30b355b9c48f schema:issueNumber 2
    89 rdf:type schema:PublicationIssue
    90 Nb3b62699aa664327a9351c412458fbd5 schema:name readcube_id
    91 schema:value 365fbaf29cfe3598d57a70216539d2783056de73b32cbc33c53fff7d3ee6861e
    92 rdf:type schema:PropertyValue
    93 Ne4490e56c28448f1b227ca67b34d219b schema:volumeNumber 78
    94 rdf:type schema:PublicationVolume
    95 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    96 schema:name Engineering
    97 rdf:type schema:DefinedTerm
    98 anzsrc-for:0914 schema:inDefinedTermSet anzsrc-for:
    99 schema:name Resources Engineering and Extractive Metallurgy
    100 rdf:type schema:DefinedTerm
    101 sg:journal.1136592 schema:issn 1435-9529
    102 1435-9537
    103 schema:name Bulletin of Engineering Geology and the Environment
    104 rdf:type schema:Periodical
    105 sg:person.011674327623.36 schema:affiliation https://www.grid.ac/institutes/grid.34980.36
    106 schema:familyName Latha
    107 schema:givenName Gali Madhavi
    108 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011674327623.36
    109 rdf:type schema:Person
    110 sg:person.013005700521.41 schema:affiliation https://www.grid.ac/institutes/grid.34980.36
    111 schema:familyName Tiwari
    112 schema:givenName Gaurav
    113 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013005700521.41
    114 rdf:type schema:Person
    115 sg:pub.10.1007/bf00547132 schema:sameAs https://app.dimensions.ai/details/publication/pub.1015487151
    116 https://doi.org/10.1007/bf00547132
    117 rdf:type schema:CreativeWork
    118 sg:pub.10.1007/bf01238181 schema:sameAs https://app.dimensions.ai/details/publication/pub.1044793694
    119 https://doi.org/10.1007/bf01238181
    120 rdf:type schema:CreativeWork
    121 sg:pub.10.1007/bf01239627 schema:sameAs https://app.dimensions.ai/details/publication/pub.1030668189
    122 https://doi.org/10.1007/bf01239627
    123 rdf:type schema:CreativeWork
    124 sg:pub.10.1007/bf01245574 schema:sameAs https://app.dimensions.ai/details/publication/pub.1027836654
    125 https://doi.org/10.1007/bf01245574
    126 rdf:type schema:CreativeWork
    127 sg:pub.10.1007/s00603-002-0034-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1014942090
    128 https://doi.org/10.1007/s00603-002-0034-0
    129 rdf:type schema:CreativeWork
    130 sg:pub.10.1007/s00603-008-0011-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1000790963
    131 https://doi.org/10.1007/s00603-008-0011-3
    132 rdf:type schema:CreativeWork
    133 sg:pub.10.1007/s00603-010-0088-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1018530739
    134 https://doi.org/10.1007/s00603-010-0088-3
    135 rdf:type schema:CreativeWork
    136 sg:pub.10.1007/s00603-011-0138-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1040526385
    137 https://doi.org/10.1007/s00603-011-0138-5
    138 rdf:type schema:CreativeWork
    139 sg:pub.10.1007/s00603-011-0145-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1016166253
    140 https://doi.org/10.1007/s00603-011-0145-6
    141 rdf:type schema:CreativeWork
    142 sg:pub.10.1007/s00603-011-0208-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1034179739
    143 https://doi.org/10.1007/s00603-011-0208-8
    144 rdf:type schema:CreativeWork
    145 sg:pub.10.1007/s00603-013-0493-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1038677016
    146 https://doi.org/10.1007/s00603-013-0493-5
    147 rdf:type schema:CreativeWork
    148 sg:pub.10.1007/s00603-014-0549-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1012124961
    149 https://doi.org/10.1007/s00603-014-0549-1
    150 rdf:type schema:CreativeWork
    151 sg:pub.10.1007/s00603-014-0631-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1050586004
    152 https://doi.org/10.1007/s00603-014-0631-8
    153 rdf:type schema:CreativeWork
    154 sg:pub.10.1007/s00603-016-0913-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1019808653
    155 https://doi.org/10.1007/s00603-016-0913-4
    156 rdf:type schema:CreativeWork
    157 sg:pub.10.1007/s006030070002 schema:sameAs https://app.dimensions.ai/details/publication/pub.1019830617
    158 https://doi.org/10.1007/s006030070002
    159 rdf:type schema:CreativeWork
    160 sg:pub.10.1007/s10064-002-0166-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1085140986
    161 https://doi.org/10.1007/s10064-002-0166-1
    162 rdf:type schema:CreativeWork
    163 sg:pub.10.1007/s10346-014-0511-z schema:sameAs https://app.dimensions.ai/details/publication/pub.1040680135
    164 https://doi.org/10.1007/s10346-014-0511-z
    165 rdf:type schema:CreativeWork
    166 sg:pub.10.1007/s10346-016-0709-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1012742653
    167 https://doi.org/10.1007/s10346-016-0709-3
    168 rdf:type schema:CreativeWork
    169 sg:pub.10.1007/s10706-005-4431-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1027527338
    170 https://doi.org/10.1007/s10706-005-4431-5
    171 rdf:type schema:CreativeWork
    172 https://doi.org/10.1016/0013-7952(94)90029-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1037324667
    173 rdf:type schema:CreativeWork
    174 https://doi.org/10.1016/0148-9062(70)90007-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1049422877
    175 rdf:type schema:CreativeWork
    176 https://doi.org/10.1016/0148-9062(78)91470-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1035520076
    177 rdf:type schema:CreativeWork
    178 https://doi.org/10.1016/0148-9062(85)93227-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1022163516
    179 rdf:type schema:CreativeWork
    180 https://doi.org/10.1016/0148-9062(89)90936-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036081662
    181 rdf:type schema:CreativeWork
    182 https://doi.org/10.1016/j.compgeo.2012.05.010 schema:sameAs https://app.dimensions.ai/details/publication/pub.1045827497
    183 rdf:type schema:CreativeWork
    184 https://doi.org/10.1016/j.compgeo.2015.06.016 schema:sameAs https://app.dimensions.ai/details/publication/pub.1041078985
    185 rdf:type schema:CreativeWork
    186 https://doi.org/10.1016/j.enggeo.2006.01.001 schema:sameAs https://app.dimensions.ai/details/publication/pub.1047947899
    187 rdf:type schema:CreativeWork
    188 https://doi.org/10.1016/j.enggeo.2009.11.006 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036347263
    189 rdf:type schema:CreativeWork
    190 https://doi.org/10.1016/j.ijrmms.2003.12.073 schema:sameAs https://app.dimensions.ai/details/publication/pub.1041849751
    191 rdf:type schema:CreativeWork
    192 https://doi.org/10.1016/j.ijrmms.2005.06.005 schema:sameAs https://app.dimensions.ai/details/publication/pub.1004139961
    193 rdf:type schema:CreativeWork
    194 https://doi.org/10.1016/j.ijrmms.2006.07.005 schema:sameAs https://app.dimensions.ai/details/publication/pub.1048844515
    195 rdf:type schema:CreativeWork
    196 https://doi.org/10.1016/j.ijrmms.2012.12.034 schema:sameAs https://app.dimensions.ai/details/publication/pub.1005583416
    197 rdf:type schema:CreativeWork
    198 https://doi.org/10.1016/j.ijrmms.2013.02.007 schema:sameAs https://app.dimensions.ai/details/publication/pub.1015311999
    199 rdf:type schema:CreativeWork
    200 https://doi.org/10.1016/j.ijrmms.2014.04.001 schema:sameAs https://app.dimensions.ai/details/publication/pub.1008834669
    201 rdf:type schema:CreativeWork
    202 https://doi.org/10.1016/j.ijrmms.2015.10.013 schema:sameAs https://app.dimensions.ai/details/publication/pub.1014344487
    203 rdf:type schema:CreativeWork
    204 https://doi.org/10.1016/j.jsg.2016.02.010 schema:sameAs https://app.dimensions.ai/details/publication/pub.1027894881
    205 rdf:type schema:CreativeWork
    206 https://doi.org/10.1016/j.tust.2015.05.003 schema:sameAs https://app.dimensions.ai/details/publication/pub.1013323638
    207 rdf:type schema:CreativeWork
    208 https://doi.org/10.1016/s0148-9062(99)00043-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1015734595
    209 rdf:type schema:CreativeWork
    210 https://doi.org/10.1016/s0951-8320(97)00071-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1051438223
    211 rdf:type schema:CreativeWork
    212 https://doi.org/10.1016/s1365-1609(03)00025-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1014206165
    213 rdf:type schema:CreativeWork
    214 https://doi.org/10.1016/s1365-1609(03)00076-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1006063981
    215 rdf:type schema:CreativeWork
    216 https://doi.org/10.1016/s1365-1609(97)80069-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1047244099
    217 rdf:type schema:CreativeWork
    218 https://doi.org/10.1016/s1365-1609(98)80024-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1024958863
    219 rdf:type schema:CreativeWork
    220 https://doi.org/10.1061/(asce)0733-9399(2001)127:12(1240) schema:sameAs https://app.dimensions.ai/details/publication/pub.1057583854
    221 rdf:type schema:CreativeWork
    222 https://doi.org/10.1061/(asce)1090-0241(2005)131:11(1423) schema:sameAs https://app.dimensions.ai/details/publication/pub.1057618953
    223 rdf:type schema:CreativeWork
    224 https://doi.org/10.1139/t07-030 schema:sameAs https://app.dimensions.ai/details/publication/pub.1007155757
    225 rdf:type schema:CreativeWork
    226 https://doi.org/10.1520/jte12072j schema:sameAs https://app.dimensions.ai/details/publication/pub.1067621791
    227 rdf:type schema:CreativeWork
    228 https://doi.org/10.1680/geot.1964.14.2.77 schema:sameAs https://app.dimensions.ai/details/publication/pub.1068209018
    229 rdf:type schema:CreativeWork
    230 https://doi.org/10.1680/geot.1985.35.1.3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1068210049
    231 rdf:type schema:CreativeWork
    232 https://www.grid.ac/institutes/grid.34980.36 schema:alternateName Indian Institute of Science Bangalore
    233 schema:name Department of Civil Engineering, Indian Institute of Science, Bangalore, India
    234 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...