Comparative study of two materials for dynamic hip screw during fall and gait loading: titanium alloy and stainless steel View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2011-11

AUTHORS

Nooshin S. Taheri, Aaron S. Blicblau, Manmohan Singh

ABSTRACT

BACKGROUND: Internal fixation with dynamic hip screw is a choice of treatment for hip fractures to stabilize a femoral fracture. Choosing the proper implant and its material has a great effect on the healing process and failure prevention. The purpose of this analysis was to assess biomechanical behavior of dynamic hip screw with two different materials implanted in the femur during fall and gait. METHODS: A 3D finite element model of an intact femur and a 3D implant within the same femur were developed. A finite element analysis was carried out to establish the effect of load conditions and implant material properties on biomechanical behavior of the dynamic hip screw after internal fixation. Two load configurations are chosen: one simulating the stance phase of the normal gait cycle, and the other replicating a low-energy fall. The implanted femur was investigated with two different materials for the dynamic hip screw: stainless steel and titanium alloy. RESULTS: During stance, more stress is placed on the implanted femur compared with the intact femur. During a fall, the implanted femur is in a greater state of stress, which mostly occurs inside the dynamic hip screw. Titanium alloy decreases stress levels by an average of 40% compared with stainless steel. However, deformation is slightly reduced with a stainless steel dynamic hip screw during both load cases. CONCLUSIONS: After internal fixation, dynamic hip screw generates greater stresses within the implanted femur compared with the intact femur under the same loading conditions. A titanium alloy implant appears to undergo less stress from a low-energy fall compared with stainless steel and can be considered the preferred implant material. The critical parts of the dynamic hip screw are the forth distal screw and the plate. More... »

PAGES

805-813

References to SciGraph publications

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/s00776-011-0145-0

DOI

http://dx.doi.org/10.1007/s00776-011-0145-0

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1031601348

PUBMED

https://www.ncbi.nlm.nih.gov/pubmed/21877191


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Materials Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Accidental Falls", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Alloys", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Biomechanical Phenomena", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Bone Screws", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Finite Element Analysis", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Gait", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Hip Fractures", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Materials Testing", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Stainless Steel", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Titanium", 
        "type": "DefinedTerm"
      }, 
      {
        "inDefinedTermSet": "https://www.nlm.nih.gov/mesh/", 
        "name": "Weight-Bearing", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "Swinburne University of Technology", 
          "id": "https://www.grid.ac/institutes/grid.1027.4", 
          "name": [
            "Faculty of Engineering and Industrial Sciences, Swinburne University of Technology, 3122, Hawthorn, VIC, Australia"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Taheri", 
        "givenName": "Nooshin S.", 
        "id": "sg:person.01054007352.89", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01054007352.89"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Swinburne University of Technology", 
          "id": "https://www.grid.ac/institutes/grid.1027.4", 
          "name": [
            "Faculty of Engineering and Industrial Sciences, Swinburne University of Technology, 3122, Hawthorn, VIC, Australia"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Blicblau", 
        "givenName": "Aaron S.", 
        "id": "sg:person.013660566057.80", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013660566057.80"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Swinburne University of Technology", 
          "id": "https://www.grid.ac/institutes/grid.1027.4", 
          "name": [
            "Faculty of Engineering and Industrial Sciences, Swinburne University of Technology, 3122, Hawthorn, VIC, Australia"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Singh", 
        "givenName": "Manmohan", 
        "id": "sg:person.014562622347.59", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014562622347.59"
        ], 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "sg:pub.10.1007/bf00420257", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1009237884", 
          "https://doi.org/10.1007/bf00420257"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf00420257", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1009237884", 
          "https://doi.org/10.1007/bf00420257"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.clinbiomech.2006.06.001", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1010395057"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1186/1757-1626-3-19", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1011413261", 
          "https://doi.org/10.1186/1757-1626-3-19"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0020-1383(95)00079-o", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1012149087"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf01774015", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1012558994", 
          "https://doi.org/10.1007/bf01774015"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf01774015", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1012558994", 
          "https://doi.org/10.1007/bf01774015"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/pl00004148", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1016444239", 
          "https://doi.org/10.1007/pl00004148"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.medengphy.2003.11.011", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1017933321"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s1350-4533(98)00079-4", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1018025424"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/jor.1100100314", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1018093430"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1002/jor.1100100314", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1018093430"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0021-9290(95)00164-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1024165911"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.clinbiomech.2004.01.004", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1026594037"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s1350-4533(02)00185-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1027751368"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s1350-4533(02)00185-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1027751368"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.injury.2009.09.006", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1029428896"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0020-1383(03)00076-7", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1031616787"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0020-1383(03)00076-7", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1031616787"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s1350-4533(00)00081-3", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1038563498"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0268-0033(03)00085-8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1041511952"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0268-0033(03)00085-8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1041511952"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0020-1383(02)00054-2", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1044367520"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00264-009-0840-z", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1046500538", 
          "https://doi.org/10.1007/s00264-009-0840-z"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00264-009-0840-z", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1046500538", 
          "https://doi.org/10.1007/s00264-009-0840-z"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00264-009-0840-z", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1046500538", 
          "https://doi.org/10.1007/s00264-009-0840-z"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.clinbiomech.2003.12.003", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1047828432"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1115/1.2895414", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1062090470"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1115/1.3426197", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1062121453"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1243/09544119jeim156", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1064454861"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1243/09544119jeim156", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1064454861"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.2106/00004623-200309000-00004", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1068895799"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "2011-11", 
    "datePublishedReg": "2011-11-01", 
    "description": "BACKGROUND: Internal fixation with dynamic hip screw is a choice of treatment for hip fractures to stabilize a femoral fracture. Choosing the proper implant and its material has a great effect on the healing process and failure prevention. The purpose of this analysis was to assess biomechanical behavior of dynamic hip screw with two different materials implanted in the femur during fall and gait.\nMETHODS: A 3D finite element model of an intact femur and a 3D implant within the same femur were developed. A finite element analysis was carried out to establish the effect of load conditions and implant material properties on biomechanical behavior of the dynamic hip screw after internal fixation. Two load configurations are chosen: one simulating the stance phase of the normal gait cycle, and the other replicating a low-energy fall. The implanted femur was investigated with two different materials for the dynamic hip screw: stainless steel and titanium alloy.\nRESULTS: During stance, more stress is placed on the implanted femur compared with the intact femur. During a fall, the implanted femur is in a greater state of stress, which mostly occurs inside the dynamic hip screw. Titanium alloy decreases stress levels by an average of 40% compared with stainless steel. However, deformation is slightly reduced with a stainless steel dynamic hip screw during both load cases.\nCONCLUSIONS: After internal fixation, dynamic hip screw generates greater stresses within the implanted femur compared with the intact femur under the same loading conditions. A titanium alloy implant appears to undergo less stress from a low-energy fall compared with stainless steel and can be considered the preferred implant material. The critical parts of the dynamic hip screw are the forth distal screw and the plate.", 
    "genre": "research_article", 
    "id": "sg:pub.10.1007/s00776-011-0145-0", 
    "inLanguage": [
      "en"
    ], 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1115232", 
        "issn": [
          "0949-2658", 
          "1436-2023"
        ], 
        "name": "Journal of Orthopaedic Science", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "6", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "16"
      }
    ], 
    "name": "Comparative study of two materials for dynamic hip screw during fall and gait loading: titanium alloy and stainless steel", 
    "pagination": "805-813", 
    "productId": [
      {
        "name": "readcube_id", 
        "type": "PropertyValue", 
        "value": [
          "968af14c4e4d5f160a5d858f971ffec40ccd86d8ff73da9fb9ffa85b1b7e153b"
        ]
      }, 
      {
        "name": "pubmed_id", 
        "type": "PropertyValue", 
        "value": [
          "21877191"
        ]
      }, 
      {
        "name": "nlm_unique_id", 
        "type": "PropertyValue", 
        "value": [
          "9604934"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/s00776-011-0145-0"
        ]
      }, 
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1031601348"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/s00776-011-0145-0", 
      "https://app.dimensions.ai/details/publication/pub.1031601348"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2019-04-10T22:32", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8690_00000513.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "http://link.springer.com/10.1007%2Fs00776-011-0145-0"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s00776-011-0145-0'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s00776-011-0145-0'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s00776-011-0145-0'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s00776-011-0145-0'


 

This table displays all metadata directly associated to this object as RDF triples.

201 TRIPLES      21 PREDICATES      63 URIs      32 LITERALS      20 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/s00776-011-0145-0 schema:about N0a0b49e2ee8940d1ac72a2d21ac74cc8
2 N0fdc980076e64ccda5f3a648cf3a6868
3 N22c00eebe0614fc886df2a54389b35eb
4 N313c651486fc4b799f51b148b65c2338
5 N39651576dc5d4f15b6ce7758913a0947
6 N56e1263169af47aeafde6f0a56723efd
7 N8f52f21f08c84e26ae2330c799932b9b
8 N9f93a7a8fbcf425292e789fb64f0e86d
9 Nc9bf021e15a646699088f9fa8bad575b
10 Nca7ecb27498649b8b9bd25976f2ea059
11 Ne3358e50bc8741de95e4afd149387d08
12 anzsrc-for:09
13 anzsrc-for:0912
14 schema:author Ne65d925878774bdc99227744067fe07e
15 schema:citation sg:pub.10.1007/bf00420257
16 sg:pub.10.1007/bf01774015
17 sg:pub.10.1007/pl00004148
18 sg:pub.10.1007/s00264-009-0840-z
19 sg:pub.10.1186/1757-1626-3-19
20 https://doi.org/10.1002/jor.1100100314
21 https://doi.org/10.1016/0020-1383(95)00079-o
22 https://doi.org/10.1016/0021-9290(95)00164-6
23 https://doi.org/10.1016/j.clinbiomech.2003.12.003
24 https://doi.org/10.1016/j.clinbiomech.2004.01.004
25 https://doi.org/10.1016/j.clinbiomech.2006.06.001
26 https://doi.org/10.1016/j.injury.2009.09.006
27 https://doi.org/10.1016/j.medengphy.2003.11.011
28 https://doi.org/10.1016/s0020-1383(02)00054-2
29 https://doi.org/10.1016/s0020-1383(03)00076-7
30 https://doi.org/10.1016/s0268-0033(03)00085-8
31 https://doi.org/10.1016/s1350-4533(00)00081-3
32 https://doi.org/10.1016/s1350-4533(02)00185-6
33 https://doi.org/10.1016/s1350-4533(98)00079-4
34 https://doi.org/10.1115/1.2895414
35 https://doi.org/10.1115/1.3426197
36 https://doi.org/10.1243/09544119jeim156
37 https://doi.org/10.2106/00004623-200309000-00004
38 schema:datePublished 2011-11
39 schema:datePublishedReg 2011-11-01
40 schema:description BACKGROUND: Internal fixation with dynamic hip screw is a choice of treatment for hip fractures to stabilize a femoral fracture. Choosing the proper implant and its material has a great effect on the healing process and failure prevention. The purpose of this analysis was to assess biomechanical behavior of dynamic hip screw with two different materials implanted in the femur during fall and gait. METHODS: A 3D finite element model of an intact femur and a 3D implant within the same femur were developed. A finite element analysis was carried out to establish the effect of load conditions and implant material properties on biomechanical behavior of the dynamic hip screw after internal fixation. Two load configurations are chosen: one simulating the stance phase of the normal gait cycle, and the other replicating a low-energy fall. The implanted femur was investigated with two different materials for the dynamic hip screw: stainless steel and titanium alloy. RESULTS: During stance, more stress is placed on the implanted femur compared with the intact femur. During a fall, the implanted femur is in a greater state of stress, which mostly occurs inside the dynamic hip screw. Titanium alloy decreases stress levels by an average of 40% compared with stainless steel. However, deformation is slightly reduced with a stainless steel dynamic hip screw during both load cases. CONCLUSIONS: After internal fixation, dynamic hip screw generates greater stresses within the implanted femur compared with the intact femur under the same loading conditions. A titanium alloy implant appears to undergo less stress from a low-energy fall compared with stainless steel and can be considered the preferred implant material. The critical parts of the dynamic hip screw are the forth distal screw and the plate.
41 schema:genre research_article
42 schema:inLanguage en
43 schema:isAccessibleForFree false
44 schema:isPartOf Nd419d76b7c924842a9131ba21c6b0ca1
45 Nd854656f8d8c41d6b431efa3354d5919
46 sg:journal.1115232
47 schema:name Comparative study of two materials for dynamic hip screw during fall and gait loading: titanium alloy and stainless steel
48 schema:pagination 805-813
49 schema:productId N0dcb95e481bf4aed94b1decb9df11b67
50 N1cf8406c14054a75ba98f838bbd1274b
51 N38298a40425446f0be2a053408ca38f1
52 N858b465922284fbab1442f32600d5b76
53 N9d51f49c0edd4bc68002e6d33cc521a9
54 schema:sameAs https://app.dimensions.ai/details/publication/pub.1031601348
55 https://doi.org/10.1007/s00776-011-0145-0
56 schema:sdDatePublished 2019-04-10T22:32
57 schema:sdLicense https://scigraph.springernature.com/explorer/license/
58 schema:sdPublisher Na0e0cd6ee34f431cbcf55615a2e41b49
59 schema:url http://link.springer.com/10.1007%2Fs00776-011-0145-0
60 sgo:license sg:explorer/license/
61 sgo:sdDataset articles
62 rdf:type schema:ScholarlyArticle
63 N0a0b49e2ee8940d1ac72a2d21ac74cc8 schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
64 schema:name Materials Testing
65 rdf:type schema:DefinedTerm
66 N0dcb95e481bf4aed94b1decb9df11b67 schema:name pubmed_id
67 schema:value 21877191
68 rdf:type schema:PropertyValue
69 N0fdc980076e64ccda5f3a648cf3a6868 schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
70 schema:name Weight-Bearing
71 rdf:type schema:DefinedTerm
72 N1cf8406c14054a75ba98f838bbd1274b schema:name doi
73 schema:value 10.1007/s00776-011-0145-0
74 rdf:type schema:PropertyValue
75 N22c00eebe0614fc886df2a54389b35eb schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
76 schema:name Bone Screws
77 rdf:type schema:DefinedTerm
78 N313c651486fc4b799f51b148b65c2338 schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
79 schema:name Hip Fractures
80 rdf:type schema:DefinedTerm
81 N38298a40425446f0be2a053408ca38f1 schema:name nlm_unique_id
82 schema:value 9604934
83 rdf:type schema:PropertyValue
84 N39651576dc5d4f15b6ce7758913a0947 schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
85 schema:name Accidental Falls
86 rdf:type schema:DefinedTerm
87 N56e1263169af47aeafde6f0a56723efd schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
88 schema:name Finite Element Analysis
89 rdf:type schema:DefinedTerm
90 N7ffec7d982954daf901c0dcd090142f9 rdf:first sg:person.014562622347.59
91 rdf:rest rdf:nil
92 N858b465922284fbab1442f32600d5b76 schema:name readcube_id
93 schema:value 968af14c4e4d5f160a5d858f971ffec40ccd86d8ff73da9fb9ffa85b1b7e153b
94 rdf:type schema:PropertyValue
95 N8f52f21f08c84e26ae2330c799932b9b schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
96 schema:name Titanium
97 rdf:type schema:DefinedTerm
98 N9d51f49c0edd4bc68002e6d33cc521a9 schema:name dimensions_id
99 schema:value pub.1031601348
100 rdf:type schema:PropertyValue
101 N9f93a7a8fbcf425292e789fb64f0e86d schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
102 schema:name Gait
103 rdf:type schema:DefinedTerm
104 Na0e0cd6ee34f431cbcf55615a2e41b49 schema:name Springer Nature - SN SciGraph project
105 rdf:type schema:Organization
106 Nb9867a8ad6a44ed0a33f0192e1889ada rdf:first sg:person.013660566057.80
107 rdf:rest N7ffec7d982954daf901c0dcd090142f9
108 Nc9bf021e15a646699088f9fa8bad575b schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
109 schema:name Biomechanical Phenomena
110 rdf:type schema:DefinedTerm
111 Nca7ecb27498649b8b9bd25976f2ea059 schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
112 schema:name Alloys
113 rdf:type schema:DefinedTerm
114 Nd419d76b7c924842a9131ba21c6b0ca1 schema:volumeNumber 16
115 rdf:type schema:PublicationVolume
116 Nd854656f8d8c41d6b431efa3354d5919 schema:issueNumber 6
117 rdf:type schema:PublicationIssue
118 Ne3358e50bc8741de95e4afd149387d08 schema:inDefinedTermSet https://www.nlm.nih.gov/mesh/
119 schema:name Stainless Steel
120 rdf:type schema:DefinedTerm
121 Ne65d925878774bdc99227744067fe07e rdf:first sg:person.01054007352.89
122 rdf:rest Nb9867a8ad6a44ed0a33f0192e1889ada
123 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
124 schema:name Engineering
125 rdf:type schema:DefinedTerm
126 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
127 schema:name Materials Engineering
128 rdf:type schema:DefinedTerm
129 sg:journal.1115232 schema:issn 0949-2658
130 1436-2023
131 schema:name Journal of Orthopaedic Science
132 rdf:type schema:Periodical
133 sg:person.01054007352.89 schema:affiliation https://www.grid.ac/institutes/grid.1027.4
134 schema:familyName Taheri
135 schema:givenName Nooshin S.
136 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01054007352.89
137 rdf:type schema:Person
138 sg:person.013660566057.80 schema:affiliation https://www.grid.ac/institutes/grid.1027.4
139 schema:familyName Blicblau
140 schema:givenName Aaron S.
141 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013660566057.80
142 rdf:type schema:Person
143 sg:person.014562622347.59 schema:affiliation https://www.grid.ac/institutes/grid.1027.4
144 schema:familyName Singh
145 schema:givenName Manmohan
146 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014562622347.59
147 rdf:type schema:Person
148 sg:pub.10.1007/bf00420257 schema:sameAs https://app.dimensions.ai/details/publication/pub.1009237884
149 https://doi.org/10.1007/bf00420257
150 rdf:type schema:CreativeWork
151 sg:pub.10.1007/bf01774015 schema:sameAs https://app.dimensions.ai/details/publication/pub.1012558994
152 https://doi.org/10.1007/bf01774015
153 rdf:type schema:CreativeWork
154 sg:pub.10.1007/pl00004148 schema:sameAs https://app.dimensions.ai/details/publication/pub.1016444239
155 https://doi.org/10.1007/pl00004148
156 rdf:type schema:CreativeWork
157 sg:pub.10.1007/s00264-009-0840-z schema:sameAs https://app.dimensions.ai/details/publication/pub.1046500538
158 https://doi.org/10.1007/s00264-009-0840-z
159 rdf:type schema:CreativeWork
160 sg:pub.10.1186/1757-1626-3-19 schema:sameAs https://app.dimensions.ai/details/publication/pub.1011413261
161 https://doi.org/10.1186/1757-1626-3-19
162 rdf:type schema:CreativeWork
163 https://doi.org/10.1002/jor.1100100314 schema:sameAs https://app.dimensions.ai/details/publication/pub.1018093430
164 rdf:type schema:CreativeWork
165 https://doi.org/10.1016/0020-1383(95)00079-o schema:sameAs https://app.dimensions.ai/details/publication/pub.1012149087
166 rdf:type schema:CreativeWork
167 https://doi.org/10.1016/0021-9290(95)00164-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1024165911
168 rdf:type schema:CreativeWork
169 https://doi.org/10.1016/j.clinbiomech.2003.12.003 schema:sameAs https://app.dimensions.ai/details/publication/pub.1047828432
170 rdf:type schema:CreativeWork
171 https://doi.org/10.1016/j.clinbiomech.2004.01.004 schema:sameAs https://app.dimensions.ai/details/publication/pub.1026594037
172 rdf:type schema:CreativeWork
173 https://doi.org/10.1016/j.clinbiomech.2006.06.001 schema:sameAs https://app.dimensions.ai/details/publication/pub.1010395057
174 rdf:type schema:CreativeWork
175 https://doi.org/10.1016/j.injury.2009.09.006 schema:sameAs https://app.dimensions.ai/details/publication/pub.1029428896
176 rdf:type schema:CreativeWork
177 https://doi.org/10.1016/j.medengphy.2003.11.011 schema:sameAs https://app.dimensions.ai/details/publication/pub.1017933321
178 rdf:type schema:CreativeWork
179 https://doi.org/10.1016/s0020-1383(02)00054-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1044367520
180 rdf:type schema:CreativeWork
181 https://doi.org/10.1016/s0020-1383(03)00076-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1031616787
182 rdf:type schema:CreativeWork
183 https://doi.org/10.1016/s0268-0033(03)00085-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1041511952
184 rdf:type schema:CreativeWork
185 https://doi.org/10.1016/s1350-4533(00)00081-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1038563498
186 rdf:type schema:CreativeWork
187 https://doi.org/10.1016/s1350-4533(02)00185-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1027751368
188 rdf:type schema:CreativeWork
189 https://doi.org/10.1016/s1350-4533(98)00079-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1018025424
190 rdf:type schema:CreativeWork
191 https://doi.org/10.1115/1.2895414 schema:sameAs https://app.dimensions.ai/details/publication/pub.1062090470
192 rdf:type schema:CreativeWork
193 https://doi.org/10.1115/1.3426197 schema:sameAs https://app.dimensions.ai/details/publication/pub.1062121453
194 rdf:type schema:CreativeWork
195 https://doi.org/10.1243/09544119jeim156 schema:sameAs https://app.dimensions.ai/details/publication/pub.1064454861
196 rdf:type schema:CreativeWork
197 https://doi.org/10.2106/00004623-200309000-00004 schema:sameAs https://app.dimensions.ai/details/publication/pub.1068895799
198 rdf:type schema:CreativeWork
199 https://www.grid.ac/institutes/grid.1027.4 schema:alternateName Swinburne University of Technology
200 schema:name Faculty of Engineering and Industrial Sciences, Swinburne University of Technology, 3122, Hawthorn, VIC, Australia
201 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...