Experimental investigation of vortex rings impinging on inclined surfaces View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2011-06-12

AUTHORS

Lauren D. Couch, Paul S. Krueger

ABSTRACT

Vortex–ring interactions with oblique boundaries were studied experimentally to determine the effects of plate angle on the generation of secondary vorticity, the evolution of the primary vorticity and secondary vorticity as they interact near the boundary, and the associated energy dissipation. Vortex rings were generated using a mechanical piston-cylinder vortex ring generator at jet Reynolds numbers 2,000–4,000 and stroke length to piston diameter ratios (L/D) in the range 0.75–2.0. The plate angle relative to the initial axis of the vortex ring ranged from 3 to 60°. Flow analysis was performed using planar laser-induced fluorescence (PLIF), digital particle image velocimetry (DPIV), and defocusing digital particle tracking velocimetry (DDPTV). Results showed the generation of secondary vorticity at the plate and its subsequent ejection into the fluid. The trajectories of the centers of circulation showed a maximum ejection angle of the secondary vorticity occurring for an angle of incidence of 10°. At lower incidence angles (<20°), the lower portion of the ring, which interacted with the plate first, played an important role in generation of the secondary vorticity and is a key reason for the maximum ejection angle for the secondary vorticity occurring at an incidence angle of 10°. Higher Reynolds number vortex rings resulted in more rapid destabilization of the flow. The three-dimensional DDPTV results showed an arc of secondary vorticity and secondary flow along the sides of the primary vortex ring as it collided with the boundary. Computation of the moments and products of kinetic energy and vorticity magnitude about the centroid of each vortex ring showed increasing asymmetry in the flow as the vortex interaction with the boundary evolved and more rapid dissipation of kinetic energy for higher incidence angles. More... »

PAGES

1123-1138

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/s00348-011-1135-x

DOI

http://dx.doi.org/10.1007/s00348-011-1135-x

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1004407003


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0915", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Interdisciplinary Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, 30332, Atlanta, GA, USA", 
          "id": "http://www.grid.ac/institutes/grid.213917.f", 
          "name": [
            "Department of Mechanical Engineering, Southern Methodist University, 75275, Dallas, TX, USA", 
            "George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, 30332, Atlanta, GA, USA"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Couch", 
        "givenName": "Lauren D.", 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Department of Mechanical Engineering, Southern Methodist University, 75275, Dallas, TX, USA", 
          "id": "http://www.grid.ac/institutes/grid.263864.d", 
          "name": [
            "Department of Mechanical Engineering, Southern Methodist University, 75275, Dallas, TX, USA"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Krueger", 
        "givenName": "Paul S.", 
        "id": "sg:person.01352635635.73", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01352635635.73"
        ], 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "sg:pub.10.1007/bf00187063", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1031537708", 
          "https://doi.org/10.1007/bf00187063"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/978-3-662-03637-2", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1000493663", 
          "https://doi.org/10.1007/978-3-662-03637-2"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf00987573", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1051873309", 
          "https://doi.org/10.1007/bf00987573"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf00190388", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1033189122", 
          "https://doi.org/10.1007/bf00190388"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/978-94-011-0249-0_4", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1004657538", 
          "https://doi.org/10.1007/978-94-011-0249-0_4"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00348-008-0516-2", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1001032870", 
          "https://doi.org/10.1007/s00348-008-0516-2"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s003480070010", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1016947720", 
          "https://doi.org/10.1007/s003480070010"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00348-009-0745-z", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1036320186", 
          "https://doi.org/10.1007/s00348-009-0745-z"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s003480050082", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1028311821", 
          "https://doi.org/10.1007/s003480050082"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "2011-06-12", 
    "datePublishedReg": "2011-06-12", 
    "description": "Vortex\u2013ring interactions with oblique boundaries were studied experimentally to determine the effects of plate angle on the generation of secondary vorticity, the evolution of the primary vorticity and secondary vorticity as they interact near the boundary, and the associated energy dissipation. Vortex rings were generated using a mechanical piston-cylinder vortex ring generator at jet Reynolds numbers 2,000\u20134,000 and stroke length to piston diameter ratios (L/D) in the range 0.75\u20132.0. The plate angle relative to the initial axis of the vortex ring ranged from 3 to 60\u00b0. Flow analysis was performed using planar laser-induced fluorescence (PLIF), digital particle image velocimetry (DPIV), and defocusing digital particle tracking velocimetry (DDPTV). Results showed the generation of secondary vorticity at the plate and its subsequent ejection into the fluid. The trajectories of the centers of circulation showed a maximum ejection angle of the secondary vorticity occurring for an angle of incidence of 10\u00b0. At lower incidence angles (<20\u00b0), the lower portion of the ring, which interacted with the plate first, played an important role in generation of the secondary vorticity and is a key reason for the maximum ejection angle for the secondary vorticity occurring at an incidence angle of 10\u00b0. Higher Reynolds number vortex rings resulted in more rapid destabilization of the flow. The three-dimensional DDPTV results showed an arc of secondary vorticity and secondary flow along the sides of the primary vortex ring as it collided with the boundary. Computation of the moments and products of kinetic energy and vorticity magnitude about the centroid of each vortex ring showed increasing asymmetry in the flow as the vortex interaction with the boundary evolved and more rapid dissipation of kinetic energy for higher incidence angles.", 
    "genre": "article", 
    "id": "sg:pub.10.1007/s00348-011-1135-x", 
    "inLanguage": "en", 
    "isAccessibleForFree": false, 
    "isFundedItemOf": [
      {
        "id": "sg:grant.3090997", 
        "type": "MonetaryGrant"
      }
    ], 
    "isPartOf": [
      {
        "id": "sg:journal.1042183", 
        "issn": [
          "0723-4864", 
          "1432-1114"
        ], 
        "name": "Experiments in Fluids", 
        "publisher": "Springer Nature", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "4", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "51"
      }
    ], 
    "keywords": [
      "digital particle image velocimetry", 
      "planar laser-induced fluorescence", 
      "secondary vorticity", 
      "vortex rings", 
      "particle image velocimetry", 
      "incidence angle", 
      "kinetic energy", 
      "associated energy dissipation", 
      "image velocimetry", 
      "digital particle", 
      "low incidence angles", 
      "primary vortex ring", 
      "jet Reynolds", 
      "secondary flow", 
      "vorticity magnitude", 
      "vortex interaction", 
      "high incidence angles", 
      "experimental investigation", 
      "inclined surfaces", 
      "primary vorticity", 
      "energy dissipation", 
      "oblique boundaries", 
      "plate angle", 
      "vorticity", 
      "diameter ratio", 
      "velocimetry", 
      "stroke length", 
      "laser-induced fluorescence", 
      "center of circulation", 
      "angle of incidence", 
      "ejection angle", 
      "dissipation", 
      "vortex ring generator", 
      "plate", 
      "rapid destabilization", 
      "flow", 
      "angle", 
      "boundaries", 
      "Reynolds", 
      "subsequent ejection", 
      "energy", 
      "generation", 
      "generator", 
      "particles", 
      "ring generators", 
      "lower portion", 
      "rapid dissipation", 
      "surface", 
      "initial axis", 
      "fluid", 
      "results", 
      "ejection", 
      "investigation", 
      "ratio", 
      "key reason", 
      "arc", 
      "magnitude", 
      "side", 
      "computation", 
      "interaction", 
      "length", 
      "axis", 
      "trajectories", 
      "moment", 
      "products", 
      "effect", 
      "evolution", 
      "important role", 
      "ring", 
      "analysis", 
      "circulation", 
      "centroid", 
      "portion", 
      "reasons", 
      "destabilization", 
      "asymmetry", 
      "center", 
      "fluorescence", 
      "role", 
      "incidence", 
      "Vortex\u2013ring interactions", 
      "mechanical piston-cylinder vortex ring generator", 
      "piston-cylinder vortex ring generator", 
      "piston diameter ratios", 
      "maximum ejection angle", 
      "Higher Reynolds number vortex rings", 
      "Reynolds number vortex rings", 
      "number vortex rings", 
      "more rapid destabilization", 
      "three-dimensional DDPTV results", 
      "DDPTV results"
    ], 
    "name": "Experimental investigation of vortex rings impinging on inclined surfaces", 
    "pagination": "1123-1138", 
    "productId": [
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1004407003"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/s00348-011-1135-x"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/s00348-011-1135-x", 
      "https://app.dimensions.ai/details/publication/pub.1004407003"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2022-01-01T18:26", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-springernature-scigraph/baseset/20220101/entities/gbq_results/article/article_555.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "https://doi.org/10.1007/s00348-011-1135-x"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s00348-011-1135-x'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s00348-011-1135-x'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s00348-011-1135-x'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s00348-011-1135-x'


 

This table displays all metadata directly associated to this object as RDF triples.

197 TRIPLES      22 PREDICATES      125 URIs      108 LITERALS      6 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/s00348-011-1135-x schema:about anzsrc-for:09
2 anzsrc-for:0915
3 schema:author N784255ec8dec4ee5be8daeec364e3bfc
4 schema:citation sg:pub.10.1007/978-3-662-03637-2
5 sg:pub.10.1007/978-94-011-0249-0_4
6 sg:pub.10.1007/bf00187063
7 sg:pub.10.1007/bf00190388
8 sg:pub.10.1007/bf00987573
9 sg:pub.10.1007/s00348-008-0516-2
10 sg:pub.10.1007/s00348-009-0745-z
11 sg:pub.10.1007/s003480050082
12 sg:pub.10.1007/s003480070010
13 schema:datePublished 2011-06-12
14 schema:datePublishedReg 2011-06-12
15 schema:description Vortex–ring interactions with oblique boundaries were studied experimentally to determine the effects of plate angle on the generation of secondary vorticity, the evolution of the primary vorticity and secondary vorticity as they interact near the boundary, and the associated energy dissipation. Vortex rings were generated using a mechanical piston-cylinder vortex ring generator at jet Reynolds numbers 2,000–4,000 and stroke length to piston diameter ratios (L/D) in the range 0.75–2.0. The plate angle relative to the initial axis of the vortex ring ranged from 3 to 60°. Flow analysis was performed using planar laser-induced fluorescence (PLIF), digital particle image velocimetry (DPIV), and defocusing digital particle tracking velocimetry (DDPTV). Results showed the generation of secondary vorticity at the plate and its subsequent ejection into the fluid. The trajectories of the centers of circulation showed a maximum ejection angle of the secondary vorticity occurring for an angle of incidence of 10°. At lower incidence angles (<20°), the lower portion of the ring, which interacted with the plate first, played an important role in generation of the secondary vorticity and is a key reason for the maximum ejection angle for the secondary vorticity occurring at an incidence angle of 10°. Higher Reynolds number vortex rings resulted in more rapid destabilization of the flow. The three-dimensional DDPTV results showed an arc of secondary vorticity and secondary flow along the sides of the primary vortex ring as it collided with the boundary. Computation of the moments and products of kinetic energy and vorticity magnitude about the centroid of each vortex ring showed increasing asymmetry in the flow as the vortex interaction with the boundary evolved and more rapid dissipation of kinetic energy for higher incidence angles.
16 schema:genre article
17 schema:inLanguage en
18 schema:isAccessibleForFree false
19 schema:isPartOf N83ae8581bba14063a29d9162ef0a0984
20 Ne7c26faa30d94b80a5a76dfa76c21d67
21 sg:journal.1042183
22 schema:keywords DDPTV results
23 Higher Reynolds number vortex rings
24 Reynolds
25 Reynolds number vortex rings
26 Vortex–ring interactions
27 analysis
28 angle
29 angle of incidence
30 arc
31 associated energy dissipation
32 asymmetry
33 axis
34 boundaries
35 center
36 center of circulation
37 centroid
38 circulation
39 computation
40 destabilization
41 diameter ratio
42 digital particle
43 digital particle image velocimetry
44 dissipation
45 effect
46 ejection
47 ejection angle
48 energy
49 energy dissipation
50 evolution
51 experimental investigation
52 flow
53 fluid
54 fluorescence
55 generation
56 generator
57 high incidence angles
58 image velocimetry
59 important role
60 incidence
61 incidence angle
62 inclined surfaces
63 initial axis
64 interaction
65 investigation
66 jet Reynolds
67 key reason
68 kinetic energy
69 laser-induced fluorescence
70 length
71 low incidence angles
72 lower portion
73 magnitude
74 maximum ejection angle
75 mechanical piston-cylinder vortex ring generator
76 moment
77 more rapid destabilization
78 number vortex rings
79 oblique boundaries
80 particle image velocimetry
81 particles
82 piston diameter ratios
83 piston-cylinder vortex ring generator
84 planar laser-induced fluorescence
85 plate
86 plate angle
87 portion
88 primary vortex ring
89 primary vorticity
90 products
91 rapid destabilization
92 rapid dissipation
93 ratio
94 reasons
95 results
96 ring
97 ring generators
98 role
99 secondary flow
100 secondary vorticity
101 side
102 stroke length
103 subsequent ejection
104 surface
105 three-dimensional DDPTV results
106 trajectories
107 velocimetry
108 vortex interaction
109 vortex ring generator
110 vortex rings
111 vorticity
112 vorticity magnitude
113 schema:name Experimental investigation of vortex rings impinging on inclined surfaces
114 schema:pagination 1123-1138
115 schema:productId N4cf8c053fb664087981f959df0f34e5a
116 N84b62060ac7540b5b5eab43f4e7f3be1
117 schema:sameAs https://app.dimensions.ai/details/publication/pub.1004407003
118 https://doi.org/10.1007/s00348-011-1135-x
119 schema:sdDatePublished 2022-01-01T18:26
120 schema:sdLicense https://scigraph.springernature.com/explorer/license/
121 schema:sdPublisher Ne257ba4109174c8081bc9f03e4ff766e
122 schema:url https://doi.org/10.1007/s00348-011-1135-x
123 sgo:license sg:explorer/license/
124 sgo:sdDataset articles
125 rdf:type schema:ScholarlyArticle
126 N4cf8c053fb664087981f959df0f34e5a schema:name dimensions_id
127 schema:value pub.1004407003
128 rdf:type schema:PropertyValue
129 N607fd1f988264183a740f5f06194710f rdf:first sg:person.01352635635.73
130 rdf:rest rdf:nil
131 N784255ec8dec4ee5be8daeec364e3bfc rdf:first Nb97a3aa897c74e7295ad5ddc41f42cdd
132 rdf:rest N607fd1f988264183a740f5f06194710f
133 N83ae8581bba14063a29d9162ef0a0984 schema:issueNumber 4
134 rdf:type schema:PublicationIssue
135 N84b62060ac7540b5b5eab43f4e7f3be1 schema:name doi
136 schema:value 10.1007/s00348-011-1135-x
137 rdf:type schema:PropertyValue
138 Nb97a3aa897c74e7295ad5ddc41f42cdd schema:affiliation grid-institutes:grid.213917.f
139 schema:familyName Couch
140 schema:givenName Lauren D.
141 rdf:type schema:Person
142 Ne257ba4109174c8081bc9f03e4ff766e schema:name Springer Nature - SN SciGraph project
143 rdf:type schema:Organization
144 Ne7c26faa30d94b80a5a76dfa76c21d67 schema:volumeNumber 51
145 rdf:type schema:PublicationVolume
146 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
147 schema:name Engineering
148 rdf:type schema:DefinedTerm
149 anzsrc-for:0915 schema:inDefinedTermSet anzsrc-for:
150 schema:name Interdisciplinary Engineering
151 rdf:type schema:DefinedTerm
152 sg:grant.3090997 http://pending.schema.org/fundedItem sg:pub.10.1007/s00348-011-1135-x
153 rdf:type schema:MonetaryGrant
154 sg:journal.1042183 schema:issn 0723-4864
155 1432-1114
156 schema:name Experiments in Fluids
157 schema:publisher Springer Nature
158 rdf:type schema:Periodical
159 sg:person.01352635635.73 schema:affiliation grid-institutes:grid.263864.d
160 schema:familyName Krueger
161 schema:givenName Paul S.
162 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01352635635.73
163 rdf:type schema:Person
164 sg:pub.10.1007/978-3-662-03637-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1000493663
165 https://doi.org/10.1007/978-3-662-03637-2
166 rdf:type schema:CreativeWork
167 sg:pub.10.1007/978-94-011-0249-0_4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1004657538
168 https://doi.org/10.1007/978-94-011-0249-0_4
169 rdf:type schema:CreativeWork
170 sg:pub.10.1007/bf00187063 schema:sameAs https://app.dimensions.ai/details/publication/pub.1031537708
171 https://doi.org/10.1007/bf00187063
172 rdf:type schema:CreativeWork
173 sg:pub.10.1007/bf00190388 schema:sameAs https://app.dimensions.ai/details/publication/pub.1033189122
174 https://doi.org/10.1007/bf00190388
175 rdf:type schema:CreativeWork
176 sg:pub.10.1007/bf00987573 schema:sameAs https://app.dimensions.ai/details/publication/pub.1051873309
177 https://doi.org/10.1007/bf00987573
178 rdf:type schema:CreativeWork
179 sg:pub.10.1007/s00348-008-0516-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1001032870
180 https://doi.org/10.1007/s00348-008-0516-2
181 rdf:type schema:CreativeWork
182 sg:pub.10.1007/s00348-009-0745-z schema:sameAs https://app.dimensions.ai/details/publication/pub.1036320186
183 https://doi.org/10.1007/s00348-009-0745-z
184 rdf:type schema:CreativeWork
185 sg:pub.10.1007/s003480050082 schema:sameAs https://app.dimensions.ai/details/publication/pub.1028311821
186 https://doi.org/10.1007/s003480050082
187 rdf:type schema:CreativeWork
188 sg:pub.10.1007/s003480070010 schema:sameAs https://app.dimensions.ai/details/publication/pub.1016947720
189 https://doi.org/10.1007/s003480070010
190 rdf:type schema:CreativeWork
191 grid-institutes:grid.213917.f schema:alternateName George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, 30332, Atlanta, GA, USA
192 schema:name Department of Mechanical Engineering, Southern Methodist University, 75275, Dallas, TX, USA
193 George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, 30332, Atlanta, GA, USA
194 rdf:type schema:Organization
195 grid-institutes:grid.263864.d schema:alternateName Department of Mechanical Engineering, Southern Methodist University, 75275, Dallas, TX, USA
196 schema:name Department of Mechanical Engineering, Southern Methodist University, 75275, Dallas, TX, USA
197 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...