Pulsatile flows and wall-shear stresses in models simulating normal and stenosed aortic arches View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2009-10-10

AUTHORS

Rong Fung Huang, Ten-Fang Yang, Y.-K. Lan

ABSTRACT

Pulsatile aqueous glycerol solution flows in the models simulating normal and stenosed human aortic arches are measured by means of particle image velocimetry. Three transparent models were used: normal, 25% stenosed, and 50% stenosed aortic arches. The Womersley parameter, Dean number, and time-averaged Reynolds number are 17.31, 725, and 1,081, respectively. The Reynolds numbers based on the peak velocities of the normal, 25% stenosed, and 50% stenosed aortic arches are 2,484, 3,456, and 3,931, respectively. The study presents the temporal/spatial evolution processes of the flow pattern, velocity distribution, and wall-shear stress during the systolic and diastolic phases. It is found that the flow pattern evolving in the central plane of normal and stenosed aortic arches exhibits (1) a separation bubble around the inner arch, (2) a recirculation vortex around the outer arch wall upstream of the junction of the brachiocephalic artery, (3) an accelerated main stream around the outer arch wall near the junctions of the left carotid and the left subclavian arteries, and (4) the vortices around the entrances of the three main branches. The study identifies and discusses the reasons for the flow physics’ contribution to the formation of these features. The oscillating wall-shear stress distributions are closely related to the featured flow structures. On the outer wall of normal and slightly stenosed aortas, large wall-shear stresses appear in the regions upstream of the junction of the brachiocephalic artery as well as the corner near the junctions of the left carotid artery and the left subclavian artery. On the inner wall, the largest wall-shear stress appears in the region where the boundary layer separates. More... »

PAGES

497-508

References to SciGraph publications

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/s00348-009-0754-y

DOI

http://dx.doi.org/10.1007/s00348-009-0754-y

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1034181625


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0901", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Aerospace Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0913", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Mechanical Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0915", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Interdisciplinary Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "Department of Mechanical Engineering, National Taiwan University of Science and Technology, 10672, Taipei, Taiwan, ROC", 
          "id": "http://www.grid.ac/institutes/grid.45907.3f", 
          "name": [
            "Department of Mechanical Engineering, National Taiwan University of Science and Technology, 10672, Taipei, Taiwan, ROC"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Huang", 
        "givenName": "Rong Fung", 
        "id": "sg:person.01363517461.91", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01363517461.91"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Department of Biological Science and Technology, National Chiao Tung University, 30068, Hsinchu, Taiwan, ROC", 
          "id": "http://www.grid.ac/institutes/grid.260539.b", 
          "name": [
            "Department of Biological Science and Technology, National Chiao Tung University, 30068, Hsinchu, Taiwan, ROC"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Yang", 
        "givenName": "Ten-Fang", 
        "id": "sg:person.01025602066.67", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01025602066.67"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Department of Mechanical Engineering, National Taiwan University of Science and Technology, 10672, Taipei, Taiwan, ROC", 
          "id": "http://www.grid.ac/institutes/grid.45907.3f", 
          "name": [
            "Department of Mechanical Engineering, National Taiwan University of Science and Technology, 10672, Taipei, Taiwan, ROC"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Lan", 
        "givenName": "Y.-K.", 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "sg:pub.10.1007/bf00384623", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1031371913", 
          "https://doi.org/10.1007/bf00384623"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00348-008-0551-z", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1013167427", 
          "https://doi.org/10.1007/s00348-008-0551-z"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "2009-10-10", 
    "datePublishedReg": "2009-10-10", 
    "description": "Pulsatile aqueous glycerol solution flows in the models simulating normal and stenosed human aortic arches are measured by means of particle image velocimetry. Three transparent models were used: normal, 25% stenosed, and 50% stenosed aortic arches. The Womersley parameter, Dean number, and time-averaged Reynolds number are 17.31, 725, and 1,081, respectively. The Reynolds numbers based on the peak velocities of the normal, 25% stenosed, and 50% stenosed aortic arches are 2,484, 3,456, and 3,931, respectively. The study presents the temporal/spatial evolution processes of the flow pattern, velocity distribution, and wall-shear stress during the systolic and diastolic phases. It is found that the flow pattern evolving in the central plane of normal and stenosed aortic arches exhibits (1) a separation bubble around the inner arch, (2) a recirculation vortex around the outer arch wall upstream of the junction of the brachiocephalic artery, (3) an accelerated main stream around the outer arch wall near the junctions of the left carotid and the left subclavian arteries, and (4) the vortices around the entrances of the three main branches. The study identifies and discusses the reasons for the flow physics\u2019 contribution to the formation of these features. The oscillating wall-shear stress distributions are closely related to the featured flow structures. On the outer wall of normal and slightly stenosed aortas, large wall-shear stresses appear in the regions upstream of the junction of the brachiocephalic artery as well as the corner near the junctions of the left carotid artery and the left subclavian artery. On the inner wall, the largest wall-shear stress appears in the region where the boundary layer separates.", 
    "genre": "article", 
    "id": "sg:pub.10.1007/s00348-009-0754-y", 
    "inLanguage": "en", 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1042183", 
        "issn": [
          "0723-4864", 
          "1432-1114"
        ], 
        "name": "Experiments in Fluids", 
        "publisher": "Springer Nature", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "3", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "48"
      }
    ], 
    "keywords": [
      "wall-shear stress", 
      "wall-shear stress distribution", 
      "Reynolds number", 
      "time-averaged Reynolds number", 
      "particle image velocimetry", 
      "flow patterns", 
      "boundary layer separates", 
      "spatial evolution processes", 
      "image velocimetry", 
      "separation bubble", 
      "flow structure", 
      "aqueous glycerol solutions", 
      "recirculation vortex", 
      "wall upstream", 
      "flow physics", 
      "layer separates", 
      "human aortic arch", 
      "stress distribution", 
      "velocity distribution", 
      "Dean number", 
      "inner arch", 
      "Womersley parameter", 
      "inner wall", 
      "outer wall", 
      "transparent model", 
      "pulsatile flow", 
      "glycerol solution", 
      "vortices", 
      "central plane", 
      "main stream", 
      "arch wall", 
      "velocimetry", 
      "wall", 
      "stress", 
      "evolution process", 
      "bubbles", 
      "velocity", 
      "flow", 
      "junctions", 
      "model", 
      "diastolic phase", 
      "distribution", 
      "corner", 
      "parameters", 
      "solution", 
      "phase", 
      "streams", 
      "plane", 
      "process", 
      "upstream", 
      "structure", 
      "peak velocity", 
      "separates", 
      "entrance", 
      "physics", 
      "formation", 
      "exhibit", 
      "arch", 
      "means", 
      "number", 
      "region", 
      "features", 
      "contribution", 
      "reasons", 
      "patterns", 
      "study", 
      "main branches", 
      "branches", 
      "region upstream", 
      "aortic arch", 
      "study identifies", 
      "brachiocephalic artery", 
      "identifies", 
      "carotid artery", 
      "artery", 
      "aorta", 
      "left subclavian artery", 
      "left carotid artery", 
      "subclavian artery", 
      "carotid", 
      "left carotid", 
      "systolic", 
      "aortic arches exhibits", 
      "arches exhibits", 
      "outer arch wall upstream", 
      "arch wall upstream", 
      "accelerated main stream", 
      "outer arch wall", 
      "featured flow structures", 
      "large wall-shear stresses"
    ], 
    "name": "Pulsatile flows and wall-shear stresses in models simulating normal and stenosed aortic arches", 
    "pagination": "497-508", 
    "productId": [
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1034181625"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/s00348-009-0754-y"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/s00348-009-0754-y", 
      "https://app.dimensions.ai/details/publication/pub.1034181625"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2022-01-01T18:20", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-springernature-scigraph/baseset/20220101/entities/gbq_results/article/article_500.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "https://doi.org/10.1007/s00348-009-0754-y"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s00348-009-0754-y'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s00348-009-0754-y'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s00348-009-0754-y'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s00348-009-0754-y'


 

This table displays all metadata directly associated to this object as RDF triples.

180 TRIPLES      22 PREDICATES      119 URIs      107 LITERALS      6 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/s00348-009-0754-y schema:about anzsrc-for:09
2 anzsrc-for:0901
3 anzsrc-for:0913
4 anzsrc-for:0915
5 schema:author N201c3e37234d469e993181c2c16ec189
6 schema:citation sg:pub.10.1007/bf00384623
7 sg:pub.10.1007/s00348-008-0551-z
8 schema:datePublished 2009-10-10
9 schema:datePublishedReg 2009-10-10
10 schema:description Pulsatile aqueous glycerol solution flows in the models simulating normal and stenosed human aortic arches are measured by means of particle image velocimetry. Three transparent models were used: normal, 25% stenosed, and 50% stenosed aortic arches. The Womersley parameter, Dean number, and time-averaged Reynolds number are 17.31, 725, and 1,081, respectively. The Reynolds numbers based on the peak velocities of the normal, 25% stenosed, and 50% stenosed aortic arches are 2,484, 3,456, and 3,931, respectively. The study presents the temporal/spatial evolution processes of the flow pattern, velocity distribution, and wall-shear stress during the systolic and diastolic phases. It is found that the flow pattern evolving in the central plane of normal and stenosed aortic arches exhibits (1) a separation bubble around the inner arch, (2) a recirculation vortex around the outer arch wall upstream of the junction of the brachiocephalic artery, (3) an accelerated main stream around the outer arch wall near the junctions of the left carotid and the left subclavian arteries, and (4) the vortices around the entrances of the three main branches. The study identifies and discusses the reasons for the flow physics’ contribution to the formation of these features. The oscillating wall-shear stress distributions are closely related to the featured flow structures. On the outer wall of normal and slightly stenosed aortas, large wall-shear stresses appear in the regions upstream of the junction of the brachiocephalic artery as well as the corner near the junctions of the left carotid artery and the left subclavian artery. On the inner wall, the largest wall-shear stress appears in the region where the boundary layer separates.
11 schema:genre article
12 schema:inLanguage en
13 schema:isAccessibleForFree false
14 schema:isPartOf N9560a821bd7e4a1dbdd26f5a409d08c4
15 Nb12c41dd83ba4cfaa937321b84b8f535
16 sg:journal.1042183
17 schema:keywords Dean number
18 Reynolds number
19 Womersley parameter
20 accelerated main stream
21 aorta
22 aortic arch
23 aortic arches exhibits
24 aqueous glycerol solutions
25 arch
26 arch wall
27 arch wall upstream
28 arches exhibits
29 artery
30 boundary layer separates
31 brachiocephalic artery
32 branches
33 bubbles
34 carotid
35 carotid artery
36 central plane
37 contribution
38 corner
39 diastolic phase
40 distribution
41 entrance
42 evolution process
43 exhibit
44 featured flow structures
45 features
46 flow
47 flow patterns
48 flow physics
49 flow structure
50 formation
51 glycerol solution
52 human aortic arch
53 identifies
54 image velocimetry
55 inner arch
56 inner wall
57 junctions
58 large wall-shear stresses
59 layer separates
60 left carotid
61 left carotid artery
62 left subclavian artery
63 main branches
64 main stream
65 means
66 model
67 number
68 outer arch wall
69 outer arch wall upstream
70 outer wall
71 parameters
72 particle image velocimetry
73 patterns
74 peak velocity
75 phase
76 physics
77 plane
78 process
79 pulsatile flow
80 reasons
81 recirculation vortex
82 region
83 region upstream
84 separates
85 separation bubble
86 solution
87 spatial evolution processes
88 streams
89 stress
90 stress distribution
91 structure
92 study
93 study identifies
94 subclavian artery
95 systolic
96 time-averaged Reynolds number
97 transparent model
98 upstream
99 velocimetry
100 velocity
101 velocity distribution
102 vortices
103 wall
104 wall upstream
105 wall-shear stress
106 wall-shear stress distribution
107 schema:name Pulsatile flows and wall-shear stresses in models simulating normal and stenosed aortic arches
108 schema:pagination 497-508
109 schema:productId N8423714de3b8405c900f0a1dd047c3b1
110 Nc8a5551cf38949f2b1c9162b51a978cd
111 schema:sameAs https://app.dimensions.ai/details/publication/pub.1034181625
112 https://doi.org/10.1007/s00348-009-0754-y
113 schema:sdDatePublished 2022-01-01T18:20
114 schema:sdLicense https://scigraph.springernature.com/explorer/license/
115 schema:sdPublisher Nde023a19ed87449d9823d91639e4a14c
116 schema:url https://doi.org/10.1007/s00348-009-0754-y
117 sgo:license sg:explorer/license/
118 sgo:sdDataset articles
119 rdf:type schema:ScholarlyArticle
120 N201c3e37234d469e993181c2c16ec189 rdf:first sg:person.01363517461.91
121 rdf:rest Ne8954008ad0c4e81b74a312cc34f5b45
122 N4312a614a9b147d586397665ca151871 rdf:first Nd8893bb3eda94a7dbecc453ce23fd006
123 rdf:rest rdf:nil
124 N8423714de3b8405c900f0a1dd047c3b1 schema:name dimensions_id
125 schema:value pub.1034181625
126 rdf:type schema:PropertyValue
127 N9560a821bd7e4a1dbdd26f5a409d08c4 schema:issueNumber 3
128 rdf:type schema:PublicationIssue
129 Nb12c41dd83ba4cfaa937321b84b8f535 schema:volumeNumber 48
130 rdf:type schema:PublicationVolume
131 Nc8a5551cf38949f2b1c9162b51a978cd schema:name doi
132 schema:value 10.1007/s00348-009-0754-y
133 rdf:type schema:PropertyValue
134 Nd8893bb3eda94a7dbecc453ce23fd006 schema:affiliation grid-institutes:grid.45907.3f
135 schema:familyName Lan
136 schema:givenName Y.-K.
137 rdf:type schema:Person
138 Nde023a19ed87449d9823d91639e4a14c schema:name Springer Nature - SN SciGraph project
139 rdf:type schema:Organization
140 Ne8954008ad0c4e81b74a312cc34f5b45 rdf:first sg:person.01025602066.67
141 rdf:rest N4312a614a9b147d586397665ca151871
142 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
143 schema:name Engineering
144 rdf:type schema:DefinedTerm
145 anzsrc-for:0901 schema:inDefinedTermSet anzsrc-for:
146 schema:name Aerospace Engineering
147 rdf:type schema:DefinedTerm
148 anzsrc-for:0913 schema:inDefinedTermSet anzsrc-for:
149 schema:name Mechanical Engineering
150 rdf:type schema:DefinedTerm
151 anzsrc-for:0915 schema:inDefinedTermSet anzsrc-for:
152 schema:name Interdisciplinary Engineering
153 rdf:type schema:DefinedTerm
154 sg:journal.1042183 schema:issn 0723-4864
155 1432-1114
156 schema:name Experiments in Fluids
157 schema:publisher Springer Nature
158 rdf:type schema:Periodical
159 sg:person.01025602066.67 schema:affiliation grid-institutes:grid.260539.b
160 schema:familyName Yang
161 schema:givenName Ten-Fang
162 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01025602066.67
163 rdf:type schema:Person
164 sg:person.01363517461.91 schema:affiliation grid-institutes:grid.45907.3f
165 schema:familyName Huang
166 schema:givenName Rong Fung
167 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01363517461.91
168 rdf:type schema:Person
169 sg:pub.10.1007/bf00384623 schema:sameAs https://app.dimensions.ai/details/publication/pub.1031371913
170 https://doi.org/10.1007/bf00384623
171 rdf:type schema:CreativeWork
172 sg:pub.10.1007/s00348-008-0551-z schema:sameAs https://app.dimensions.ai/details/publication/pub.1013167427
173 https://doi.org/10.1007/s00348-008-0551-z
174 rdf:type schema:CreativeWork
175 grid-institutes:grid.260539.b schema:alternateName Department of Biological Science and Technology, National Chiao Tung University, 30068, Hsinchu, Taiwan, ROC
176 schema:name Department of Biological Science and Technology, National Chiao Tung University, 30068, Hsinchu, Taiwan, ROC
177 rdf:type schema:Organization
178 grid-institutes:grid.45907.3f schema:alternateName Department of Mechanical Engineering, National Taiwan University of Science and Technology, 10672, Taipei, Taiwan, ROC
179 schema:name Department of Mechanical Engineering, National Taiwan University of Science and Technology, 10672, Taipei, Taiwan, ROC
180 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...