Integrated CAD tolerancing model based on difficulty coefficient evaluation and Lagrange multiplier View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2019-04

AUTHORS

Mehdi Tlija, Maroua Ghali, Nizar Aifaoui

ABSTRACT

Tolerance allocation is a very important assignment. In fact, knowing how to allocate efficiently tolerances for assembly parts in a computer-aided design (CAD) and computer-aided manufacturing (CAM) system is a very key issue because the cost and quality depend directly on dimension tolerances. The traditional optimization approaches complain about a lack regarding the evaluation of manufacturing difficulty to solve tolerance allocation problem. In this paper, a new approach based on difficulty coefficient evaluation (DCE) and Lagrange multiplier (LM) method is presented to obtain an economical tolerance allocation. In fact, DCE technique, based on the failure mode, effects and criticality analysis (FMECA) tool, is used to quantify the manufacturing difficulty of mechanical parts, as well as the LM method is developed to optimize the proposed approach while respecting the functions and manufacturing requirements. A case study is established to verify the highlights of this work. Indeed, the computed result shows that the method can produce tolerance allocation economically and accurately according to difficulty requirements. Consequently, the proposed method is performed to exploit fully design for manufacturing and assembly (DFMA). For this, an integrated CAD/tolerancing model based on manufacturing difficulty (ICADTMD) is developed using graphical user interface (GUI) in MATLAB. More... »

PAGES

1-14

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/s00170-018-3140-1

DOI

http://dx.doi.org/10.1007/s00170-018-3140-1

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1110379365


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0910", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Manufacturing Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "University of Monastir", 
          "id": "https://www.grid.ac/institutes/grid.411838.7", 
          "name": [
            "Mechanical Engineering Laboratory, National Engineering School of Monastir (LGM_ENIM), University of Monastir, 5 Av. IbnEljazzar, 5019, Monastir, Tunisia"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Tlija", 
        "givenName": "Mehdi", 
        "id": "sg:person.012523057241.45", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012523057241.45"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "University of Monastir", 
          "id": "https://www.grid.ac/institutes/grid.411838.7", 
          "name": [
            "Mechanical Engineering Laboratory, National Engineering School of Monastir (LGM_ENIM), University of Monastir, 5 Av. IbnEljazzar, 5019, Monastir, Tunisia"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Ghali", 
        "givenName": "Maroua", 
        "id": "sg:person.010303021173.31", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010303021173.31"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "University of Monastir", 
          "id": "https://www.grid.ac/institutes/grid.411838.7", 
          "name": [
            "Mechanical Engineering Laboratory, National Engineering School of Monastir (LGM_ENIM), University of Monastir, 5 Av. IbnEljazzar, 5019, Monastir, Tunisia"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Aifaoui", 
        "givenName": "Nizar", 
        "id": "sg:person.015122257725.08", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015122257725.08"
        ], 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "sg:pub.10.1007/978-3-642-11598-1_6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1003322768", 
          "https://doi.org/10.1007/978-3-642-11598-1_6"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/978-3-642-11598-1_6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1003322768", 
          "https://doi.org/10.1007/978-3-642-11598-1_6"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-009-1930-1", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1004568113", 
          "https://doi.org/10.1007/s00170-009-1930-1"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-009-1930-1", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1004568113", 
          "https://doi.org/10.1007/s00170-009-1930-1"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.procir.2013.08.005", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1004931344"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-008-1866-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1007252382", 
          "https://doi.org/10.1007/s00170-008-1866-x"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-008-1866-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1007252382", 
          "https://doi.org/10.1007/s00170-008-1866-x"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-011-3783-7", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1009370862", 
          "https://doi.org/10.1007/s00170-011-3783-7"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-003-1911-8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1009867355", 
          "https://doi.org/10.1007/s00170-003-1911-8"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-015-7480-9", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1012854799", 
          "https://doi.org/10.1007/s00170-015-7480-9"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-013-4826-z", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1014899847", 
          "https://doi.org/10.1007/s00170-013-4826-z"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-010-3047-y", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1016497752", 
          "https://doi.org/10.1007/s00170-010-3047-y"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-016-9961-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1018059543", 
          "https://doi.org/10.1007/s00170-016-9961-x"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-016-9961-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1018059543", 
          "https://doi.org/10.1007/s00170-016-9961-x"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02124750", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1028784456", 
          "https://doi.org/10.1007/bf02124750"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02124750", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1028784456", 
          "https://doi.org/10.1007/bf02124750"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-010-2871-4", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1029247094", 
          "https://doi.org/10.1007/s00170-010-2871-4"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-003-1846-0", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1030099510", 
          "https://doi.org/10.1007/s00170-003-1846-0"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-003-1846-0", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1030099510", 
          "https://doi.org/10.1007/s00170-003-1846-0"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-006-0471-0", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1034952600", 
          "https://doi.org/10.1007/s00170-006-0471-0"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-006-0471-0", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1034952600", 
          "https://doi.org/10.1007/s00170-006-0471-0"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.compind.2004.06.008", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1036174434"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s12206-016-0521-y", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1036510982", 
          "https://doi.org/10.1007/s12206-016-0521-y"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s12206-016-0521-y", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1036510982", 
          "https://doi.org/10.1007/s12206-016-0521-y"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1080/21693277.2014.892845", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1036901166"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1080/21693277.2014.892845", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1036901166"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s001700070053", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1038636595", 
          "https://doi.org/10.1007/s001700070053"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-003-1855-z", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1042160338", 
          "https://doi.org/10.1007/s00170-003-1855-z"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-003-1855-z", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1042160338", 
          "https://doi.org/10.1007/s00170-003-1855-z"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-008-1389-5", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1043485641", 
          "https://doi.org/10.1007/s00170-008-1389-5"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-008-1389-5", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1043485641", 
          "https://doi.org/10.1007/s00170-008-1389-5"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-015-7299-4", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1044090453", 
          "https://doi.org/10.1007/s00170-015-7299-4"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s00170-003-1606-1", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1044852479", 
          "https://doi.org/10.1007/s00170-003-1606-1"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.cad.2014.07.002", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1051303867"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.procir.2015.04.087", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1052131094"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/1063293x15625722", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1052151468"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/1063293x15625722", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1052151468"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0925-5273(02)00415-2", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1052291859"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0925-5273(02)00415-2", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1052291859"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1051/meca/2013054", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1057039822"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1115/1.2901931", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1062092655"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/0954405412473720", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1063882636"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/0954405412473720", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1063882636"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/0954405413488769", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1063882720"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1177/0954405413488769", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1063882720"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1243/09544054jem1304b", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1064448501"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1243/09544054jem1304b", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1064448501"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.4028/www.scientific.net/amm.52-54.1818", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1071961899"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.advengsoft.2017.07.010", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1091212230"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1109/nabic.2009.5393725", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1093592716"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.advengsoft.2018.01.008", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1100810581"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s12008-018-0472-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1101767030", 
          "https://doi.org/10.1007/s12008-018-0472-x"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s12008-018-0472-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1101767030", 
          "https://doi.org/10.1007/s12008-018-0472-x"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/s12008-018-0472-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1101767030", 
          "https://doi.org/10.1007/s12008-018-0472-x"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "2019-04", 
    "datePublishedReg": "2019-04-01", 
    "description": "Tolerance allocation is a very important assignment. In fact, knowing how to allocate efficiently tolerances for assembly parts in a computer-aided design (CAD) and computer-aided manufacturing (CAM) system is a very key issue because the cost and quality depend directly on dimension tolerances. The traditional optimization approaches complain about a lack regarding the evaluation of manufacturing difficulty to solve tolerance allocation problem. In this paper, a new approach based on difficulty coefficient evaluation (DCE) and Lagrange multiplier (LM) method is presented to obtain an economical tolerance allocation. In fact, DCE technique, based on the failure mode, effects and criticality analysis (FMECA) tool, is used to quantify the manufacturing difficulty of mechanical parts, as well as the LM method is developed to optimize the proposed approach while respecting the functions and manufacturing requirements. A case study is established to verify the highlights of this work. Indeed, the computed result shows that the method can produce tolerance allocation economically and accurately according to difficulty requirements. Consequently, the proposed method is performed to exploit fully design for manufacturing and assembly (DFMA). For this, an integrated CAD/tolerancing model based on manufacturing difficulty (ICADTMD) is developed using graphical user interface (GUI) in MATLAB.", 
    "genre": "research_article", 
    "id": "sg:pub.10.1007/s00170-018-3140-1", 
    "inLanguage": [
      "en"
    ], 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1043671", 
        "issn": [
          "0268-3768", 
          "1433-3015"
        ], 
        "name": "The International Journal of Advanced Manufacturing Technology", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "9-12", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "101"
      }
    ], 
    "name": "Integrated CAD tolerancing model based on difficulty coefficient evaluation and Lagrange multiplier", 
    "pagination": "1-14", 
    "productId": [
      {
        "name": "readcube_id", 
        "type": "PropertyValue", 
        "value": [
          "f2832504d80e505ad86d4a7171a368c6fd7cacf289c48e9a8cc924a50dd330b5"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/s00170-018-3140-1"
        ]
      }, 
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1110379365"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/s00170-018-3140-1", 
      "https://app.dimensions.ai/details/publication/pub.1110379365"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2019-04-11T14:03", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000371_0000000371/records_130831_00000006.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "https://link.springer.com/10.1007%2Fs00170-018-3140-1"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s00170-018-3140-1'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s00170-018-3140-1'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s00170-018-3140-1'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s00170-018-3140-1'


 

This table displays all metadata directly associated to this object as RDF triples.

203 TRIPLES      21 PREDICATES      63 URIs      19 LITERALS      7 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/s00170-018-3140-1 schema:about anzsrc-for:09
2 anzsrc-for:0910
3 schema:author Nd7a04b513940419aa75b302240d59516
4 schema:citation sg:pub.10.1007/978-3-642-11598-1_6
5 sg:pub.10.1007/bf02124750
6 sg:pub.10.1007/s00170-003-1606-1
7 sg:pub.10.1007/s00170-003-1846-0
8 sg:pub.10.1007/s00170-003-1855-z
9 sg:pub.10.1007/s00170-003-1911-8
10 sg:pub.10.1007/s00170-006-0471-0
11 sg:pub.10.1007/s00170-008-1389-5
12 sg:pub.10.1007/s00170-008-1866-x
13 sg:pub.10.1007/s00170-009-1930-1
14 sg:pub.10.1007/s00170-010-2871-4
15 sg:pub.10.1007/s00170-010-3047-y
16 sg:pub.10.1007/s00170-011-3783-7
17 sg:pub.10.1007/s00170-013-4826-z
18 sg:pub.10.1007/s00170-015-7299-4
19 sg:pub.10.1007/s00170-015-7480-9
20 sg:pub.10.1007/s00170-016-9961-x
21 sg:pub.10.1007/s001700070053
22 sg:pub.10.1007/s12008-018-0472-x
23 sg:pub.10.1007/s12206-016-0521-y
24 https://doi.org/10.1016/j.advengsoft.2017.07.010
25 https://doi.org/10.1016/j.advengsoft.2018.01.008
26 https://doi.org/10.1016/j.cad.2014.07.002
27 https://doi.org/10.1016/j.compind.2004.06.008
28 https://doi.org/10.1016/j.procir.2013.08.005
29 https://doi.org/10.1016/j.procir.2015.04.087
30 https://doi.org/10.1016/s0925-5273(02)00415-2
31 https://doi.org/10.1051/meca/2013054
32 https://doi.org/10.1080/21693277.2014.892845
33 https://doi.org/10.1109/nabic.2009.5393725
34 https://doi.org/10.1115/1.2901931
35 https://doi.org/10.1177/0954405412473720
36 https://doi.org/10.1177/0954405413488769
37 https://doi.org/10.1177/1063293x15625722
38 https://doi.org/10.1243/09544054jem1304b
39 https://doi.org/10.4028/www.scientific.net/amm.52-54.1818
40 schema:datePublished 2019-04
41 schema:datePublishedReg 2019-04-01
42 schema:description Tolerance allocation is a very important assignment. In fact, knowing how to allocate efficiently tolerances for assembly parts in a computer-aided design (CAD) and computer-aided manufacturing (CAM) system is a very key issue because the cost and quality depend directly on dimension tolerances. The traditional optimization approaches complain about a lack regarding the evaluation of manufacturing difficulty to solve tolerance allocation problem. In this paper, a new approach based on difficulty coefficient evaluation (DCE) and Lagrange multiplier (LM) method is presented to obtain an economical tolerance allocation. In fact, DCE technique, based on the failure mode, effects and criticality analysis (FMECA) tool, is used to quantify the manufacturing difficulty of mechanical parts, as well as the LM method is developed to optimize the proposed approach while respecting the functions and manufacturing requirements. A case study is established to verify the highlights of this work. Indeed, the computed result shows that the method can produce tolerance allocation economically and accurately according to difficulty requirements. Consequently, the proposed method is performed to exploit fully design for manufacturing and assembly (DFMA). For this, an integrated CAD/tolerancing model based on manufacturing difficulty (ICADTMD) is developed using graphical user interface (GUI) in MATLAB.
43 schema:genre research_article
44 schema:inLanguage en
45 schema:isAccessibleForFree false
46 schema:isPartOf N18e273323b744de98214f548510d14e3
47 N66a89fa64ef5422d80f6f1be4f86111e
48 sg:journal.1043671
49 schema:name Integrated CAD tolerancing model based on difficulty coefficient evaluation and Lagrange multiplier
50 schema:pagination 1-14
51 schema:productId N95cb4364c3574f28a86cc5976d2f5900
52 Nd28d7fbf30c04ce08d41f411c61fb4a4
53 Nd9f34e35436f443699338eae18d74d15
54 schema:sameAs https://app.dimensions.ai/details/publication/pub.1110379365
55 https://doi.org/10.1007/s00170-018-3140-1
56 schema:sdDatePublished 2019-04-11T14:03
57 schema:sdLicense https://scigraph.springernature.com/explorer/license/
58 schema:sdPublisher N25560bd0c4144c82b7e7d60a59b0ca49
59 schema:url https://link.springer.com/10.1007%2Fs00170-018-3140-1
60 sgo:license sg:explorer/license/
61 sgo:sdDataset articles
62 rdf:type schema:ScholarlyArticle
63 N18e273323b744de98214f548510d14e3 schema:volumeNumber 101
64 rdf:type schema:PublicationVolume
65 N25560bd0c4144c82b7e7d60a59b0ca49 schema:name Springer Nature - SN SciGraph project
66 rdf:type schema:Organization
67 N559c001223b646869d2d0f2bc52d6bf4 rdf:first sg:person.015122257725.08
68 rdf:rest rdf:nil
69 N66a89fa64ef5422d80f6f1be4f86111e schema:issueNumber 9-12
70 rdf:type schema:PublicationIssue
71 N7f94bf4baa7f4739b3054c5ac6c13d84 rdf:first sg:person.010303021173.31
72 rdf:rest N559c001223b646869d2d0f2bc52d6bf4
73 N95cb4364c3574f28a86cc5976d2f5900 schema:name readcube_id
74 schema:value f2832504d80e505ad86d4a7171a368c6fd7cacf289c48e9a8cc924a50dd330b5
75 rdf:type schema:PropertyValue
76 Nd28d7fbf30c04ce08d41f411c61fb4a4 schema:name dimensions_id
77 schema:value pub.1110379365
78 rdf:type schema:PropertyValue
79 Nd7a04b513940419aa75b302240d59516 rdf:first sg:person.012523057241.45
80 rdf:rest N7f94bf4baa7f4739b3054c5ac6c13d84
81 Nd9f34e35436f443699338eae18d74d15 schema:name doi
82 schema:value 10.1007/s00170-018-3140-1
83 rdf:type schema:PropertyValue
84 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
85 schema:name Engineering
86 rdf:type schema:DefinedTerm
87 anzsrc-for:0910 schema:inDefinedTermSet anzsrc-for:
88 schema:name Manufacturing Engineering
89 rdf:type schema:DefinedTerm
90 sg:journal.1043671 schema:issn 0268-3768
91 1433-3015
92 schema:name The International Journal of Advanced Manufacturing Technology
93 rdf:type schema:Periodical
94 sg:person.010303021173.31 schema:affiliation https://www.grid.ac/institutes/grid.411838.7
95 schema:familyName Ghali
96 schema:givenName Maroua
97 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010303021173.31
98 rdf:type schema:Person
99 sg:person.012523057241.45 schema:affiliation https://www.grid.ac/institutes/grid.411838.7
100 schema:familyName Tlija
101 schema:givenName Mehdi
102 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012523057241.45
103 rdf:type schema:Person
104 sg:person.015122257725.08 schema:affiliation https://www.grid.ac/institutes/grid.411838.7
105 schema:familyName Aifaoui
106 schema:givenName Nizar
107 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015122257725.08
108 rdf:type schema:Person
109 sg:pub.10.1007/978-3-642-11598-1_6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1003322768
110 https://doi.org/10.1007/978-3-642-11598-1_6
111 rdf:type schema:CreativeWork
112 sg:pub.10.1007/bf02124750 schema:sameAs https://app.dimensions.ai/details/publication/pub.1028784456
113 https://doi.org/10.1007/bf02124750
114 rdf:type schema:CreativeWork
115 sg:pub.10.1007/s00170-003-1606-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1044852479
116 https://doi.org/10.1007/s00170-003-1606-1
117 rdf:type schema:CreativeWork
118 sg:pub.10.1007/s00170-003-1846-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1030099510
119 https://doi.org/10.1007/s00170-003-1846-0
120 rdf:type schema:CreativeWork
121 sg:pub.10.1007/s00170-003-1855-z schema:sameAs https://app.dimensions.ai/details/publication/pub.1042160338
122 https://doi.org/10.1007/s00170-003-1855-z
123 rdf:type schema:CreativeWork
124 sg:pub.10.1007/s00170-003-1911-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1009867355
125 https://doi.org/10.1007/s00170-003-1911-8
126 rdf:type schema:CreativeWork
127 sg:pub.10.1007/s00170-006-0471-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1034952600
128 https://doi.org/10.1007/s00170-006-0471-0
129 rdf:type schema:CreativeWork
130 sg:pub.10.1007/s00170-008-1389-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1043485641
131 https://doi.org/10.1007/s00170-008-1389-5
132 rdf:type schema:CreativeWork
133 sg:pub.10.1007/s00170-008-1866-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1007252382
134 https://doi.org/10.1007/s00170-008-1866-x
135 rdf:type schema:CreativeWork
136 sg:pub.10.1007/s00170-009-1930-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1004568113
137 https://doi.org/10.1007/s00170-009-1930-1
138 rdf:type schema:CreativeWork
139 sg:pub.10.1007/s00170-010-2871-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1029247094
140 https://doi.org/10.1007/s00170-010-2871-4
141 rdf:type schema:CreativeWork
142 sg:pub.10.1007/s00170-010-3047-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1016497752
143 https://doi.org/10.1007/s00170-010-3047-y
144 rdf:type schema:CreativeWork
145 sg:pub.10.1007/s00170-011-3783-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1009370862
146 https://doi.org/10.1007/s00170-011-3783-7
147 rdf:type schema:CreativeWork
148 sg:pub.10.1007/s00170-013-4826-z schema:sameAs https://app.dimensions.ai/details/publication/pub.1014899847
149 https://doi.org/10.1007/s00170-013-4826-z
150 rdf:type schema:CreativeWork
151 sg:pub.10.1007/s00170-015-7299-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1044090453
152 https://doi.org/10.1007/s00170-015-7299-4
153 rdf:type schema:CreativeWork
154 sg:pub.10.1007/s00170-015-7480-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1012854799
155 https://doi.org/10.1007/s00170-015-7480-9
156 rdf:type schema:CreativeWork
157 sg:pub.10.1007/s00170-016-9961-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1018059543
158 https://doi.org/10.1007/s00170-016-9961-x
159 rdf:type schema:CreativeWork
160 sg:pub.10.1007/s001700070053 schema:sameAs https://app.dimensions.ai/details/publication/pub.1038636595
161 https://doi.org/10.1007/s001700070053
162 rdf:type schema:CreativeWork
163 sg:pub.10.1007/s12008-018-0472-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1101767030
164 https://doi.org/10.1007/s12008-018-0472-x
165 rdf:type schema:CreativeWork
166 sg:pub.10.1007/s12206-016-0521-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1036510982
167 https://doi.org/10.1007/s12206-016-0521-y
168 rdf:type schema:CreativeWork
169 https://doi.org/10.1016/j.advengsoft.2017.07.010 schema:sameAs https://app.dimensions.ai/details/publication/pub.1091212230
170 rdf:type schema:CreativeWork
171 https://doi.org/10.1016/j.advengsoft.2018.01.008 schema:sameAs https://app.dimensions.ai/details/publication/pub.1100810581
172 rdf:type schema:CreativeWork
173 https://doi.org/10.1016/j.cad.2014.07.002 schema:sameAs https://app.dimensions.ai/details/publication/pub.1051303867
174 rdf:type schema:CreativeWork
175 https://doi.org/10.1016/j.compind.2004.06.008 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036174434
176 rdf:type schema:CreativeWork
177 https://doi.org/10.1016/j.procir.2013.08.005 schema:sameAs https://app.dimensions.ai/details/publication/pub.1004931344
178 rdf:type schema:CreativeWork
179 https://doi.org/10.1016/j.procir.2015.04.087 schema:sameAs https://app.dimensions.ai/details/publication/pub.1052131094
180 rdf:type schema:CreativeWork
181 https://doi.org/10.1016/s0925-5273(02)00415-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1052291859
182 rdf:type schema:CreativeWork
183 https://doi.org/10.1051/meca/2013054 schema:sameAs https://app.dimensions.ai/details/publication/pub.1057039822
184 rdf:type schema:CreativeWork
185 https://doi.org/10.1080/21693277.2014.892845 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036901166
186 rdf:type schema:CreativeWork
187 https://doi.org/10.1109/nabic.2009.5393725 schema:sameAs https://app.dimensions.ai/details/publication/pub.1093592716
188 rdf:type schema:CreativeWork
189 https://doi.org/10.1115/1.2901931 schema:sameAs https://app.dimensions.ai/details/publication/pub.1062092655
190 rdf:type schema:CreativeWork
191 https://doi.org/10.1177/0954405412473720 schema:sameAs https://app.dimensions.ai/details/publication/pub.1063882636
192 rdf:type schema:CreativeWork
193 https://doi.org/10.1177/0954405413488769 schema:sameAs https://app.dimensions.ai/details/publication/pub.1063882720
194 rdf:type schema:CreativeWork
195 https://doi.org/10.1177/1063293x15625722 schema:sameAs https://app.dimensions.ai/details/publication/pub.1052151468
196 rdf:type schema:CreativeWork
197 https://doi.org/10.1243/09544054jem1304b schema:sameAs https://app.dimensions.ai/details/publication/pub.1064448501
198 rdf:type schema:CreativeWork
199 https://doi.org/10.4028/www.scientific.net/amm.52-54.1818 schema:sameAs https://app.dimensions.ai/details/publication/pub.1071961899
200 rdf:type schema:CreativeWork
201 https://www.grid.ac/institutes/grid.411838.7 schema:alternateName University of Monastir
202 schema:name Mechanical Engineering Laboratory, National Engineering School of Monastir (LGM_ENIM), University of Monastir, 5 Av. IbnEljazzar, 5019, Monastir, Tunisia
203 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...