Abrasive water jet drilling of advanced sustainable bio-fibre-reinforced polymer/hybrid composites: a comprehensive analysis of machining-induced damage responses View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2018-12

AUTHORS

Hom Nath Dhakal, Sikiru Oluwarotimi Ismail, Saheed Olalekan Ojo, Marco Paggi, James R. Smith

ABSTRACT

This paper aims at investigating the effects of variable traverse speeds on machining-induced damage of fibre-reinforced composites, using the abrasive water jet (AWJ) drilling. Three different types of epoxy-based composites laminates fabricated by vacuum bagging technique containing unidirectional (UD) flax, hybrid carbon-flax and carbon fibre-reinforced composite were used. The drilling parameters used were traverse speeds of 20, 40, 60 and 80 mm/min, constant water jet pressure of 300 MPa and a hole diameter of 10 mm. The results obtained depict that the traverse speed had a significant effect with respect to both surface roughness and delamination drilling-induced damage responses. Evidently, an increase in water jet traverse speed caused an increase in both damage responses of the three samples. Significantly, the CFRP composite sample recorded the lowest surface roughness damage response, followed by C-FFRP, while FFRP exhibited the highest. However, samples of FFRP and hybrid C-FFRP recorded lowest and highest delamination damage responses, respectively. The discrepancy in both damage responses, as further validated with micrographs of colour video microscopy (CVM), scanning electron microscopy (SEM) and X-ray micro-computed tomography (X-ray μCT), is attributed to the different mechanical properties of the reinforced fibres, fibre orientation/ply stacking and hybridisation of the samples. More... »

PAGES

1-15

References to SciGraph publications

  • 2016-09. An experimental study on abrasive waterjet cutting of CFRP/Ti6Al4V stacks for drilling operations in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2018-02. Kerf taper and delamination damage minimization of FRP hybrid composites under abrasive water-jet machining in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s00170-018-2670-x

    DOI

    http://dx.doi.org/10.1007/s00170-018-2670-x

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1107037927


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Materials Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "University of Portsmouth", 
              "id": "https://www.grid.ac/institutes/grid.4701.2", 
              "name": [
                "School of Mechanical and Design Engineering, University of Portsmouth, PO1 3DJ, Portsmouth, UK"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Dhakal", 
            "givenName": "Hom Nath", 
            "id": "sg:person.013025124657.27", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013025124657.27"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "University of Portsmouth", 
              "id": "https://www.grid.ac/institutes/grid.4701.2", 
              "name": [
                "School of Mechanical and Design Engineering, University of Portsmouth, PO1 3DJ, Portsmouth, UK"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Ismail", 
            "givenName": "Sikiru Oluwarotimi", 
            "id": "sg:person.015342374167.86", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015342374167.86"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "IMT Institute for Advanced Studies Lucca", 
              "id": "https://www.grid.ac/institutes/grid.462365.0", 
              "name": [
                "IMT School for Advanced Studies Lucca, Piazza San Francesco 19, 55100, Lucca, Italy"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Ojo", 
            "givenName": "Saheed Olalekan", 
            "id": "sg:person.016021731771.31", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016021731771.31"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "IMT Institute for Advanced Studies Lucca", 
              "id": "https://www.grid.ac/institutes/grid.462365.0", 
              "name": [
                "IMT School for Advanced Studies Lucca, Piazza San Francesco 19, 55100, Lucca, Italy"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Paggi", 
            "givenName": "Marco", 
            "id": "sg:person.015103762077.42", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015103762077.42"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "University of Portsmouth", 
              "id": "https://www.grid.ac/institutes/grid.4701.2", 
              "name": [
                "School of Pharmacy and Biomedical Sciences, University of Portsmouth, PO1 2DT, Portsmouth, UK"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Smith", 
            "givenName": "James R.", 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "https://doi.org/10.1016/j.jmapro.2009.12.001", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1003679228"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.compositesb.2011.05.022", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1006435944"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0890-6955(90)90186-m", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1009559528"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0890-6955(90)90186-m", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1009559528"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jmapro.2013.02.003", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1010542989"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0924-0136(03)00749-0", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1011405696"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0924-0136(03)00749-0", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1011405696"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1359-835x(01)00071-9", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1012451018"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1006/jcis.1996.0217", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1015476537"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.compstruct.2016.12.007", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1015677864"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0924-0136(02)01120-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1017367139"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0924-0136(02)01120-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1017367139"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jmatprotec.2010.02.011", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1022571255"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.compscitech.2006.06.019", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1023763669"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-015-8192-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1024104149", 
              "https://doi.org/10.1007/s00170-015-8192-x"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-015-8192-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1024104149", 
              "https://doi.org/10.1007/s00170-015-8192-x"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.compstruct.2011.11.024", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1025211978"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.carbpol.2013.03.074", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1026015361"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1002/app.42879", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1028106497"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.matdes.2016.03.164", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1028108916"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1111/j.1365-2133.2005.07124.x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1030806839"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1111/j.1365-2133.2005.07124.x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1030806839"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1080/10426914.2015.1117633", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1033333630"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jestch.2016.07.010", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1034360769"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0010-4361(93)90040-f", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1036301755"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0010-4361(93)90040-f", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1036301755"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jmatprotec.2004.07.069", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1036553976"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.promfg.2016.08.043", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1040828718"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1002/pc.23348", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1041087419"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.compositesa.2015.10.034", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1041923440"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.matdes.2006.04.020", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1042283662"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1080/10426914.2016.1198039", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1046439877"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.proeng.2013.08.217", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1051160201"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-016-9669-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1052450017", 
              "https://doi.org/10.1007/s00170-016-9669-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-016-9669-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1052450017", 
              "https://doi.org/10.1007/s00170-016-9669-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1002/sca.4950230104", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1052474169"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1002/sca.4950230104", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1052474169"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1177/0021998316688950", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1052527339"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1177/0021998316688950", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1052527339"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1177/0731684412444325", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1063839318"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1177/0731684412444325", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1063839318"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1177/0731684412444325", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1063839318"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1177/0954405416635034", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1063883477"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1177/0954405416635034", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1063883477"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1243/095440503772680631", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1064448092"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1243/095440503772680631", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1064448092"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.4028/www.scientific.net/amm.787.573", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1071998935"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.compstruct.2017.02.081", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1083869705"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.wear.2017.02.024", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1086040349"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.compstruct.2018.06.041", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1104594715"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2018-12", 
        "datePublishedReg": "2018-12-01", 
        "description": "This paper aims at investigating the effects of variable traverse speeds on machining-induced damage of fibre-reinforced composites, using the abrasive water jet (AWJ) drilling. Three different types of epoxy-based composites laminates fabricated by vacuum bagging technique containing unidirectional (UD) flax, hybrid carbon-flax and carbon fibre-reinforced composite were used. The drilling parameters used were traverse speeds of 20, 40, 60 and 80 mm/min, constant water jet pressure of 300 MPa and a hole diameter of 10 mm. The results obtained depict that the traverse speed had a significant effect with respect to both surface roughness and delamination drilling-induced damage responses. Evidently, an increase in water jet traverse speed caused an increase in both damage responses of the three samples. Significantly, the CFRP composite sample recorded the lowest surface roughness damage response, followed by C-FFRP, while FFRP exhibited the highest. However, samples of FFRP and hybrid C-FFRP recorded lowest and highest delamination damage responses, respectively. The discrepancy in both damage responses, as further validated with micrographs of colour video microscopy (CVM), scanning electron microscopy (SEM) and X-ray micro-computed tomography (X-ray \u03bcCT), is attributed to the different mechanical properties of the reinforced fibres, fibre orientation/ply stacking and hybridisation of the samples.", 
        "genre": "research_article", 
        "id": "sg:pub.10.1007/s00170-018-2670-x", 
        "inLanguage": [
          "en"
        ], 
        "isAccessibleForFree": false, 
        "isPartOf": [
          {
            "id": "sg:journal.1043671", 
            "issn": [
              "0268-3768", 
              "1433-3015"
            ], 
            "name": "The International Journal of Advanced Manufacturing Technology", 
            "type": "Periodical"
          }
        ], 
        "name": "Abrasive water jet drilling of advanced sustainable bio-fibre-reinforced polymer/hybrid composites: a comprehensive analysis of machining-induced damage responses", 
        "pagination": "1-15", 
        "productId": [
          {
            "name": "readcube_id", 
            "type": "PropertyValue", 
            "value": [
              "93766bad3640a162238f96717cbad8c78cbf76f271054b7b104e0dd2afacbc20"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s00170-018-2670-x"
            ]
          }, 
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1107037927"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s00170-018-2670-x", 
          "https://app.dimensions.ai/details/publication/pub.1107037927"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2019-04-11T02:11", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8700_00000526.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "http://link.springer.com/10.1007%2Fs00170-018-2670-x"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s00170-018-2670-x'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s00170-018-2670-x'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s00170-018-2670-x'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s00170-018-2670-x'


     

    This table displays all metadata directly associated to this object as RDF triples.

    199 TRIPLES      21 PREDICATES      62 URIs      17 LITERALS      5 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s00170-018-2670-x schema:about anzsrc-for:09
    2 anzsrc-for:0912
    3 schema:author Ne8474e8e06104f9c8431c51b9d59d31d
    4 schema:citation sg:pub.10.1007/s00170-015-8192-x
    5 sg:pub.10.1007/s00170-016-9669-y
    6 https://doi.org/10.1002/app.42879
    7 https://doi.org/10.1002/pc.23348
    8 https://doi.org/10.1002/sca.4950230104
    9 https://doi.org/10.1006/jcis.1996.0217
    10 https://doi.org/10.1016/0010-4361(93)90040-f
    11 https://doi.org/10.1016/0890-6955(90)90186-m
    12 https://doi.org/10.1016/j.carbpol.2013.03.074
    13 https://doi.org/10.1016/j.compositesa.2015.10.034
    14 https://doi.org/10.1016/j.compositesb.2011.05.022
    15 https://doi.org/10.1016/j.compscitech.2006.06.019
    16 https://doi.org/10.1016/j.compstruct.2011.11.024
    17 https://doi.org/10.1016/j.compstruct.2016.12.007
    18 https://doi.org/10.1016/j.compstruct.2017.02.081
    19 https://doi.org/10.1016/j.compstruct.2018.06.041
    20 https://doi.org/10.1016/j.jestch.2016.07.010
    21 https://doi.org/10.1016/j.jmapro.2009.12.001
    22 https://doi.org/10.1016/j.jmapro.2013.02.003
    23 https://doi.org/10.1016/j.jmatprotec.2004.07.069
    24 https://doi.org/10.1016/j.jmatprotec.2010.02.011
    25 https://doi.org/10.1016/j.matdes.2006.04.020
    26 https://doi.org/10.1016/j.matdes.2016.03.164
    27 https://doi.org/10.1016/j.proeng.2013.08.217
    28 https://doi.org/10.1016/j.promfg.2016.08.043
    29 https://doi.org/10.1016/j.wear.2017.02.024
    30 https://doi.org/10.1016/s0924-0136(02)01120-2
    31 https://doi.org/10.1016/s0924-0136(03)00749-0
    32 https://doi.org/10.1016/s1359-835x(01)00071-9
    33 https://doi.org/10.1080/10426914.2015.1117633
    34 https://doi.org/10.1080/10426914.2016.1198039
    35 https://doi.org/10.1111/j.1365-2133.2005.07124.x
    36 https://doi.org/10.1177/0021998316688950
    37 https://doi.org/10.1177/0731684412444325
    38 https://doi.org/10.1177/0954405416635034
    39 https://doi.org/10.1243/095440503772680631
    40 https://doi.org/10.4028/www.scientific.net/amm.787.573
    41 schema:datePublished 2018-12
    42 schema:datePublishedReg 2018-12-01
    43 schema:description This paper aims at investigating the effects of variable traverse speeds on machining-induced damage of fibre-reinforced composites, using the abrasive water jet (AWJ) drilling. Three different types of epoxy-based composites laminates fabricated by vacuum bagging technique containing unidirectional (UD) flax, hybrid carbon-flax and carbon fibre-reinforced composite were used. The drilling parameters used were traverse speeds of 20, 40, 60 and 80 mm/min, constant water jet pressure of 300 MPa and a hole diameter of 10 mm. The results obtained depict that the traverse speed had a significant effect with respect to both surface roughness and delamination drilling-induced damage responses. Evidently, an increase in water jet traverse speed caused an increase in both damage responses of the three samples. Significantly, the CFRP composite sample recorded the lowest surface roughness damage response, followed by C-FFRP, while FFRP exhibited the highest. However, samples of FFRP and hybrid C-FFRP recorded lowest and highest delamination damage responses, respectively. The discrepancy in both damage responses, as further validated with micrographs of colour video microscopy (CVM), scanning electron microscopy (SEM) and X-ray micro-computed tomography (X-ray μCT), is attributed to the different mechanical properties of the reinforced fibres, fibre orientation/ply stacking and hybridisation of the samples.
    44 schema:genre research_article
    45 schema:inLanguage en
    46 schema:isAccessibleForFree false
    47 schema:isPartOf sg:journal.1043671
    48 schema:name Abrasive water jet drilling of advanced sustainable bio-fibre-reinforced polymer/hybrid composites: a comprehensive analysis of machining-induced damage responses
    49 schema:pagination 1-15
    50 schema:productId N2ca5306a8e964964bf63b836616dcd27
    51 N3af598db1dbc4f09a8a65c936bb7962f
    52 Nfe6d05eeb9a84f0a811d2cdec07e3520
    53 schema:sameAs https://app.dimensions.ai/details/publication/pub.1107037927
    54 https://doi.org/10.1007/s00170-018-2670-x
    55 schema:sdDatePublished 2019-04-11T02:11
    56 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    57 schema:sdPublisher Nf57f168e243240cc9086291c21a267e9
    58 schema:url http://link.springer.com/10.1007%2Fs00170-018-2670-x
    59 sgo:license sg:explorer/license/
    60 sgo:sdDataset articles
    61 rdf:type schema:ScholarlyArticle
    62 N2ca5306a8e964964bf63b836616dcd27 schema:name readcube_id
    63 schema:value 93766bad3640a162238f96717cbad8c78cbf76f271054b7b104e0dd2afacbc20
    64 rdf:type schema:PropertyValue
    65 N38eab3157879464499fa7a7d36d58255 rdf:first sg:person.015103762077.42
    66 rdf:rest Nb2f2734126d14824a599794b1e67cd40
    67 N3af598db1dbc4f09a8a65c936bb7962f schema:name dimensions_id
    68 schema:value pub.1107037927
    69 rdf:type schema:PropertyValue
    70 N527a66b09e6d438892282f378c2300dd rdf:first sg:person.015342374167.86
    71 rdf:rest Nb066f2062fe64b0386db8f4f149a8ec4
    72 N7e2c3bb5b2d3453f9943b5bd150cca29 schema:affiliation https://www.grid.ac/institutes/grid.4701.2
    73 schema:familyName Smith
    74 schema:givenName James R.
    75 rdf:type schema:Person
    76 Nb066f2062fe64b0386db8f4f149a8ec4 rdf:first sg:person.016021731771.31
    77 rdf:rest N38eab3157879464499fa7a7d36d58255
    78 Nb2f2734126d14824a599794b1e67cd40 rdf:first N7e2c3bb5b2d3453f9943b5bd150cca29
    79 rdf:rest rdf:nil
    80 Ne8474e8e06104f9c8431c51b9d59d31d rdf:first sg:person.013025124657.27
    81 rdf:rest N527a66b09e6d438892282f378c2300dd
    82 Nf57f168e243240cc9086291c21a267e9 schema:name Springer Nature - SN SciGraph project
    83 rdf:type schema:Organization
    84 Nfe6d05eeb9a84f0a811d2cdec07e3520 schema:name doi
    85 schema:value 10.1007/s00170-018-2670-x
    86 rdf:type schema:PropertyValue
    87 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    88 schema:name Engineering
    89 rdf:type schema:DefinedTerm
    90 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
    91 schema:name Materials Engineering
    92 rdf:type schema:DefinedTerm
    93 sg:journal.1043671 schema:issn 0268-3768
    94 1433-3015
    95 schema:name The International Journal of Advanced Manufacturing Technology
    96 rdf:type schema:Periodical
    97 sg:person.013025124657.27 schema:affiliation https://www.grid.ac/institutes/grid.4701.2
    98 schema:familyName Dhakal
    99 schema:givenName Hom Nath
    100 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013025124657.27
    101 rdf:type schema:Person
    102 sg:person.015103762077.42 schema:affiliation https://www.grid.ac/institutes/grid.462365.0
    103 schema:familyName Paggi
    104 schema:givenName Marco
    105 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015103762077.42
    106 rdf:type schema:Person
    107 sg:person.015342374167.86 schema:affiliation https://www.grid.ac/institutes/grid.4701.2
    108 schema:familyName Ismail
    109 schema:givenName Sikiru Oluwarotimi
    110 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015342374167.86
    111 rdf:type schema:Person
    112 sg:person.016021731771.31 schema:affiliation https://www.grid.ac/institutes/grid.462365.0
    113 schema:familyName Ojo
    114 schema:givenName Saheed Olalekan
    115 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016021731771.31
    116 rdf:type schema:Person
    117 sg:pub.10.1007/s00170-015-8192-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1024104149
    118 https://doi.org/10.1007/s00170-015-8192-x
    119 rdf:type schema:CreativeWork
    120 sg:pub.10.1007/s00170-016-9669-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1052450017
    121 https://doi.org/10.1007/s00170-016-9669-y
    122 rdf:type schema:CreativeWork
    123 https://doi.org/10.1002/app.42879 schema:sameAs https://app.dimensions.ai/details/publication/pub.1028106497
    124 rdf:type schema:CreativeWork
    125 https://doi.org/10.1002/pc.23348 schema:sameAs https://app.dimensions.ai/details/publication/pub.1041087419
    126 rdf:type schema:CreativeWork
    127 https://doi.org/10.1002/sca.4950230104 schema:sameAs https://app.dimensions.ai/details/publication/pub.1052474169
    128 rdf:type schema:CreativeWork
    129 https://doi.org/10.1006/jcis.1996.0217 schema:sameAs https://app.dimensions.ai/details/publication/pub.1015476537
    130 rdf:type schema:CreativeWork
    131 https://doi.org/10.1016/0010-4361(93)90040-f schema:sameAs https://app.dimensions.ai/details/publication/pub.1036301755
    132 rdf:type schema:CreativeWork
    133 https://doi.org/10.1016/0890-6955(90)90186-m schema:sameAs https://app.dimensions.ai/details/publication/pub.1009559528
    134 rdf:type schema:CreativeWork
    135 https://doi.org/10.1016/j.carbpol.2013.03.074 schema:sameAs https://app.dimensions.ai/details/publication/pub.1026015361
    136 rdf:type schema:CreativeWork
    137 https://doi.org/10.1016/j.compositesa.2015.10.034 schema:sameAs https://app.dimensions.ai/details/publication/pub.1041923440
    138 rdf:type schema:CreativeWork
    139 https://doi.org/10.1016/j.compositesb.2011.05.022 schema:sameAs https://app.dimensions.ai/details/publication/pub.1006435944
    140 rdf:type schema:CreativeWork
    141 https://doi.org/10.1016/j.compscitech.2006.06.019 schema:sameAs https://app.dimensions.ai/details/publication/pub.1023763669
    142 rdf:type schema:CreativeWork
    143 https://doi.org/10.1016/j.compstruct.2011.11.024 schema:sameAs https://app.dimensions.ai/details/publication/pub.1025211978
    144 rdf:type schema:CreativeWork
    145 https://doi.org/10.1016/j.compstruct.2016.12.007 schema:sameAs https://app.dimensions.ai/details/publication/pub.1015677864
    146 rdf:type schema:CreativeWork
    147 https://doi.org/10.1016/j.compstruct.2017.02.081 schema:sameAs https://app.dimensions.ai/details/publication/pub.1083869705
    148 rdf:type schema:CreativeWork
    149 https://doi.org/10.1016/j.compstruct.2018.06.041 schema:sameAs https://app.dimensions.ai/details/publication/pub.1104594715
    150 rdf:type schema:CreativeWork
    151 https://doi.org/10.1016/j.jestch.2016.07.010 schema:sameAs https://app.dimensions.ai/details/publication/pub.1034360769
    152 rdf:type schema:CreativeWork
    153 https://doi.org/10.1016/j.jmapro.2009.12.001 schema:sameAs https://app.dimensions.ai/details/publication/pub.1003679228
    154 rdf:type schema:CreativeWork
    155 https://doi.org/10.1016/j.jmapro.2013.02.003 schema:sameAs https://app.dimensions.ai/details/publication/pub.1010542989
    156 rdf:type schema:CreativeWork
    157 https://doi.org/10.1016/j.jmatprotec.2004.07.069 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036553976
    158 rdf:type schema:CreativeWork
    159 https://doi.org/10.1016/j.jmatprotec.2010.02.011 schema:sameAs https://app.dimensions.ai/details/publication/pub.1022571255
    160 rdf:type schema:CreativeWork
    161 https://doi.org/10.1016/j.matdes.2006.04.020 schema:sameAs https://app.dimensions.ai/details/publication/pub.1042283662
    162 rdf:type schema:CreativeWork
    163 https://doi.org/10.1016/j.matdes.2016.03.164 schema:sameAs https://app.dimensions.ai/details/publication/pub.1028108916
    164 rdf:type schema:CreativeWork
    165 https://doi.org/10.1016/j.proeng.2013.08.217 schema:sameAs https://app.dimensions.ai/details/publication/pub.1051160201
    166 rdf:type schema:CreativeWork
    167 https://doi.org/10.1016/j.promfg.2016.08.043 schema:sameAs https://app.dimensions.ai/details/publication/pub.1040828718
    168 rdf:type schema:CreativeWork
    169 https://doi.org/10.1016/j.wear.2017.02.024 schema:sameAs https://app.dimensions.ai/details/publication/pub.1086040349
    170 rdf:type schema:CreativeWork
    171 https://doi.org/10.1016/s0924-0136(02)01120-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1017367139
    172 rdf:type schema:CreativeWork
    173 https://doi.org/10.1016/s0924-0136(03)00749-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1011405696
    174 rdf:type schema:CreativeWork
    175 https://doi.org/10.1016/s1359-835x(01)00071-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1012451018
    176 rdf:type schema:CreativeWork
    177 https://doi.org/10.1080/10426914.2015.1117633 schema:sameAs https://app.dimensions.ai/details/publication/pub.1033333630
    178 rdf:type schema:CreativeWork
    179 https://doi.org/10.1080/10426914.2016.1198039 schema:sameAs https://app.dimensions.ai/details/publication/pub.1046439877
    180 rdf:type schema:CreativeWork
    181 https://doi.org/10.1111/j.1365-2133.2005.07124.x schema:sameAs https://app.dimensions.ai/details/publication/pub.1030806839
    182 rdf:type schema:CreativeWork
    183 https://doi.org/10.1177/0021998316688950 schema:sameAs https://app.dimensions.ai/details/publication/pub.1052527339
    184 rdf:type schema:CreativeWork
    185 https://doi.org/10.1177/0731684412444325 schema:sameAs https://app.dimensions.ai/details/publication/pub.1063839318
    186 rdf:type schema:CreativeWork
    187 https://doi.org/10.1177/0954405416635034 schema:sameAs https://app.dimensions.ai/details/publication/pub.1063883477
    188 rdf:type schema:CreativeWork
    189 https://doi.org/10.1243/095440503772680631 schema:sameAs https://app.dimensions.ai/details/publication/pub.1064448092
    190 rdf:type schema:CreativeWork
    191 https://doi.org/10.4028/www.scientific.net/amm.787.573 schema:sameAs https://app.dimensions.ai/details/publication/pub.1071998935
    192 rdf:type schema:CreativeWork
    193 https://www.grid.ac/institutes/grid.462365.0 schema:alternateName IMT Institute for Advanced Studies Lucca
    194 schema:name IMT School for Advanced Studies Lucca, Piazza San Francesco 19, 55100, Lucca, Italy
    195 rdf:type schema:Organization
    196 https://www.grid.ac/institutes/grid.4701.2 schema:alternateName University of Portsmouth
    197 schema:name School of Mechanical and Design Engineering, University of Portsmouth, PO1 3DJ, Portsmouth, UK
    198 School of Pharmacy and Biomedical Sciences, University of Portsmouth, PO1 2DT, Portsmouth, UK
    199 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...