Comparative investigation on grindability of K4125 and Inconel718 nickel-based superalloys View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2018-07

AUTHORS

Ning Qian, Wenfeng Ding, Yejun Zhu

ABSTRACT

Nickel-based superalloy is a typical hard-to-machining material in the aero-engine manufacturing industry. The grindability difference of two kinds of nickel-based superalloys, i.e., equiaxed cast nickel-based superalloy K4125 and wrought nickel-based superalloy Inconel718, are discussed in this article. The influence of grinding parameters (e.g., grinding speed, workpiece speed, and depth of cut) on the grinding force, grinding temperature, and ground surface quality are explored. The results illustrate that under the given grinding conditions, grinding K4125 generates higher forces than Inconel718. The temperature from the K4125 grinding process is beyond 400 °C, while the temperature from grinding on Inconel718 is below 200 °C. Moreover, because of the chip adhesion on the wheel surface when grinding K4125, not only the wheel wear is more severe but also the ground surface of K4125 is worse than that of Inconel718. Accordingly, it could be inferred that the grindability of K4125 is worse than that of Inconel718. More... »

PAGES

1649-1661

References to SciGraph publications

  • 2010-11. Wear behavior and mechanism of single-layer brazed CBN abrasive wheels during creep-feed grinding cast nickel-based superalloy in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2018-02. Effects of tool orientation and surface curvature on surface integrity in ball end milling of TC17 in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2017-11. Research about modeling of grinding workpiece surface topography based on real topography of grinding wheel in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2015-11. Understanding the effects of grinding speed and undeformed chip thickness on the chip formation in high-speed grinding in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2015-03. Grinding temperature during high-efficiency grinding Inconel 718 using porous CBN wheel with multilayer defined grain distribution in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2017-10. Analysis of flow field in cutting zone for spiral orderly distributed fiber tool in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2007-07. Assessment of Al2O3 and superabrasive wheels in nickel-based alloy grinding in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2018-01. Grindability evaluation and tool wear during grinding of Ti2AlNb intermetallics in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2017-08. A novel approach of high-performance grinding using developed diamond wheels in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2016-07. Investigation of the flow field for a double-outlet nozzle during minimum quantity lubrication grinding in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2015-09. Fabrication and performance of monolayer brazed CBN wheel for high-speed grinding of superalloy in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2012-03. Finite element modeling of machining of hydrogenated Ti-6Al-4V alloy in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s00170-018-1993-y

    DOI

    http://dx.doi.org/10.1007/s00170-018-1993-y

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1103687202


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Materials Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "Nanjing University of Aeronautics and Astronautics", 
              "id": "https://www.grid.ac/institutes/grid.64938.30", 
              "name": [
                "College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, 210016, Nanjing, People\u2019s Republic of China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Qian", 
            "givenName": "Ning", 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Nanjing University of Aeronautics and Astronautics", 
              "id": "https://www.grid.ac/institutes/grid.64938.30", 
              "name": [
                "College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, 210016, Nanjing, People\u2019s Republic of China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Ding", 
            "givenName": "Wenfeng", 
            "id": "sg:person.016704376313.20", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016704376313.20"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Nanjing University of Aeronautics and Astronautics", 
              "id": "https://www.grid.ac/institutes/grid.64938.30", 
              "name": [
                "College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, 210016, Nanjing, People\u2019s Republic of China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Zhu", 
            "givenName": "Yejun", 
            "id": "sg:person.014500240067.57", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014500240067.57"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "https://doi.org/10.4028/www.scientific.net/amr.797.511", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1000923028"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/b978-0-444-81901-7.50067-0", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1002546158"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1081/amp-100104300", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1002651904"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1000-9361(09)60247-8", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1003547879"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jmapro.2015.12.004", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1003806915"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0924-0136(01)01024-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1004542436"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.ijmachtools.2016.12.001", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1004706945"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-011-3479-z", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1008137317", 
              "https://doi.org/10.1007/s00170-011-3479-z"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-015-7125-z", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1010102266", 
              "https://doi.org/10.1007/s00170-015-7125-z"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.procir.2015.03.053", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1011266793"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.ijmachtools.2008.03.008", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1014170590"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-006-0519-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1016690618", 
              "https://doi.org/10.1007/s00170-006-0519-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-006-0519-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1016690618", 
              "https://doi.org/10.1007/s00170-006-0519-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.cirp.2007.05.075", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1016842776"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.cirp.2014.03.024", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1024263550"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-015-7896-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1024907449", 
              "https://doi.org/10.1007/s00170-015-7896-2"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-015-7265-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1039986737", 
              "https://doi.org/10.1007/s00170-015-7265-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1080/002075497195768", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1040666225"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/0924-0136(95)02026-8", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1041131146"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0921-5093(97)00457-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1041460211"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-010-2643-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1042220937", 
              "https://doi.org/10.1007/s00170-010-2643-1"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.cirp.2015.05.004", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1042785281"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.ijmachtools.2014.11.010", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1046365844"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-014-6403-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1053398442", 
              "https://doi.org/10.1007/s00170-014-6403-5"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0924-0136(02)00656-8", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1053692356"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-017-0037-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1054082439", 
              "https://doi.org/10.1007/s00170-017-0037-3"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-017-0037-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1054082439", 
              "https://doi.org/10.1007/s00170-017-0037-3"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1115/1.1343458", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1062068198"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1115/1.1644547", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1062073485"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1115/1.1760763", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1062074184"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1115/1.1763181", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1062074219"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1177/0954405414531114", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1063882985"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1177/0954405414531114", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1063882985"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.4028/www.scientific.net/amm.853.28", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1072004065"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.ijmachtools.2017.04.013", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1085129755"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-017-0471-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1085430084", 
              "https://doi.org/10.1007/s00170-017-0471-2"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-017-0471-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1085430084", 
              "https://doi.org/10.1007/s00170-017-0471-2"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.precisioneng.2017.05.012", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1085454521"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-017-0523-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1085846054", 
              "https://doi.org/10.1007/s00170-017-0523-7"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-017-0523-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1085846054", 
              "https://doi.org/10.1007/s00170-017-0523-7"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.ijmachtools.2017.06.002", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1086030563"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.ijmachtools.2017.06.003", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1086031747"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.mssp.2017.06.031", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1086127004"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-017-0668-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1090324918", 
              "https://doi.org/10.1007/s00170-017-0668-4"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-017-0668-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1090324918", 
              "https://doi.org/10.1007/s00170-017-0668-4"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jallcom.2017.08.024", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1091053933"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.apsusc.2017.08.064", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1091244562"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-017-1005-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1091388076", 
              "https://doi.org/10.1007/s00170-017-1005-7"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2018-07", 
        "datePublishedReg": "2018-07-01", 
        "description": "Nickel-based superalloy is a typical hard-to-machining material in the aero-engine manufacturing industry. The grindability difference of two kinds of nickel-based superalloys, i.e., equiaxed cast nickel-based superalloy K4125 and wrought nickel-based superalloy Inconel718, are discussed in this article. The influence of grinding parameters (e.g., grinding speed, workpiece speed, and depth of cut) on the grinding force, grinding temperature, and ground surface quality are explored. The results illustrate that under the given grinding conditions, grinding K4125 generates higher forces than Inconel718. The temperature from the K4125 grinding process is beyond 400 \u00b0C, while the temperature from grinding on Inconel718 is below 200 \u00b0C. Moreover, because of the chip adhesion on the wheel surface when grinding K4125, not only the wheel wear is more severe but also the ground surface of K4125 is worse than that of Inconel718. Accordingly, it could be inferred that the grindability of K4125 is worse than that of Inconel718.", 
        "genre": "research_article", 
        "id": "sg:pub.10.1007/s00170-018-1993-y", 
        "inLanguage": [
          "en"
        ], 
        "isAccessibleForFree": false, 
        "isPartOf": [
          {
            "id": "sg:journal.1043671", 
            "issn": [
              "0268-3768", 
              "1433-3015"
            ], 
            "name": "The International Journal of Advanced Manufacturing Technology", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "5-8", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "97"
          }
        ], 
        "name": "Comparative investigation on grindability of K4125 and Inconel718 nickel-based superalloys", 
        "pagination": "1649-1661", 
        "productId": [
          {
            "name": "readcube_id", 
            "type": "PropertyValue", 
            "value": [
              "879565e5ea48715f092b0213ac9aed0edfa75d917309c35e9babd03d2970711a"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s00170-018-1993-y"
            ]
          }, 
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1103687202"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s00170-018-1993-y", 
          "https://app.dimensions.ai/details/publication/pub.1103687202"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2019-04-11T10:35", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000349_0000000349/records_113667_00000004.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "https://link.springer.com/10.1007%2Fs00170-018-1993-y"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s00170-018-1993-y'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s00170-018-1993-y'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s00170-018-1993-y'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s00170-018-1993-y'


     

    This table displays all metadata directly associated to this object as RDF triples.

    212 TRIPLES      21 PREDICATES      69 URIs      19 LITERALS      7 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s00170-018-1993-y schema:about anzsrc-for:09
    2 anzsrc-for:0912
    3 schema:author Nfe46ddee1d2f434a93b50ed58c7754bc
    4 schema:citation sg:pub.10.1007/s00170-006-0519-1
    5 sg:pub.10.1007/s00170-010-2643-1
    6 sg:pub.10.1007/s00170-011-3479-z
    7 sg:pub.10.1007/s00170-014-6403-5
    8 sg:pub.10.1007/s00170-015-7125-z
    9 sg:pub.10.1007/s00170-015-7265-1
    10 sg:pub.10.1007/s00170-015-7896-2
    11 sg:pub.10.1007/s00170-017-0037-3
    12 sg:pub.10.1007/s00170-017-0471-2
    13 sg:pub.10.1007/s00170-017-0523-7
    14 sg:pub.10.1007/s00170-017-0668-4
    15 sg:pub.10.1007/s00170-017-1005-7
    16 https://doi.org/10.1016/0924-0136(95)02026-8
    17 https://doi.org/10.1016/b978-0-444-81901-7.50067-0
    18 https://doi.org/10.1016/j.apsusc.2017.08.064
    19 https://doi.org/10.1016/j.cirp.2007.05.075
    20 https://doi.org/10.1016/j.cirp.2014.03.024
    21 https://doi.org/10.1016/j.cirp.2015.05.004
    22 https://doi.org/10.1016/j.ijmachtools.2008.03.008
    23 https://doi.org/10.1016/j.ijmachtools.2014.11.010
    24 https://doi.org/10.1016/j.ijmachtools.2016.12.001
    25 https://doi.org/10.1016/j.ijmachtools.2017.04.013
    26 https://doi.org/10.1016/j.ijmachtools.2017.06.002
    27 https://doi.org/10.1016/j.ijmachtools.2017.06.003
    28 https://doi.org/10.1016/j.jallcom.2017.08.024
    29 https://doi.org/10.1016/j.jmapro.2015.12.004
    30 https://doi.org/10.1016/j.mssp.2017.06.031
    31 https://doi.org/10.1016/j.precisioneng.2017.05.012
    32 https://doi.org/10.1016/j.procir.2015.03.053
    33 https://doi.org/10.1016/s0921-5093(97)00457-7
    34 https://doi.org/10.1016/s0924-0136(01)01024-x
    35 https://doi.org/10.1016/s0924-0136(02)00656-8
    36 https://doi.org/10.1016/s1000-9361(09)60247-8
    37 https://doi.org/10.1080/002075497195768
    38 https://doi.org/10.1081/amp-100104300
    39 https://doi.org/10.1115/1.1343458
    40 https://doi.org/10.1115/1.1644547
    41 https://doi.org/10.1115/1.1760763
    42 https://doi.org/10.1115/1.1763181
    43 https://doi.org/10.1177/0954405414531114
    44 https://doi.org/10.4028/www.scientific.net/amm.853.28
    45 https://doi.org/10.4028/www.scientific.net/amr.797.511
    46 schema:datePublished 2018-07
    47 schema:datePublishedReg 2018-07-01
    48 schema:description Nickel-based superalloy is a typical hard-to-machining material in the aero-engine manufacturing industry. The grindability difference of two kinds of nickel-based superalloys, i.e., equiaxed cast nickel-based superalloy K4125 and wrought nickel-based superalloy Inconel718, are discussed in this article. The influence of grinding parameters (e.g., grinding speed, workpiece speed, and depth of cut) on the grinding force, grinding temperature, and ground surface quality are explored. The results illustrate that under the given grinding conditions, grinding K4125 generates higher forces than Inconel718. The temperature from the K4125 grinding process is beyond 400 °C, while the temperature from grinding on Inconel718 is below 200 °C. Moreover, because of the chip adhesion on the wheel surface when grinding K4125, not only the wheel wear is more severe but also the ground surface of K4125 is worse than that of Inconel718. Accordingly, it could be inferred that the grindability of K4125 is worse than that of Inconel718.
    49 schema:genre research_article
    50 schema:inLanguage en
    51 schema:isAccessibleForFree false
    52 schema:isPartOf N28576ca010564c07892383329efc0341
    53 Nae9a87659ec947c4a5a00c078bcf2e4a
    54 sg:journal.1043671
    55 schema:name Comparative investigation on grindability of K4125 and Inconel718 nickel-based superalloys
    56 schema:pagination 1649-1661
    57 schema:productId N7ae44cf9f5154f289ff0d7da8b89dbcc
    58 N97dd978b918a4f3ba55961db4449630a
    59 Nf33f272d2dea4158a9bf2e7d94c9f5b4
    60 schema:sameAs https://app.dimensions.ai/details/publication/pub.1103687202
    61 https://doi.org/10.1007/s00170-018-1993-y
    62 schema:sdDatePublished 2019-04-11T10:35
    63 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    64 schema:sdPublisher Ncfad29c86ca948aa84e9a87b3ebfc7f3
    65 schema:url https://link.springer.com/10.1007%2Fs00170-018-1993-y
    66 sgo:license sg:explorer/license/
    67 sgo:sdDataset articles
    68 rdf:type schema:ScholarlyArticle
    69 N28576ca010564c07892383329efc0341 schema:issueNumber 5-8
    70 rdf:type schema:PublicationIssue
    71 N73e42fc709e74f618accfb39de78e595 schema:affiliation https://www.grid.ac/institutes/grid.64938.30
    72 schema:familyName Qian
    73 schema:givenName Ning
    74 rdf:type schema:Person
    75 N7ae44cf9f5154f289ff0d7da8b89dbcc schema:name readcube_id
    76 schema:value 879565e5ea48715f092b0213ac9aed0edfa75d917309c35e9babd03d2970711a
    77 rdf:type schema:PropertyValue
    78 N97dd978b918a4f3ba55961db4449630a schema:name doi
    79 schema:value 10.1007/s00170-018-1993-y
    80 rdf:type schema:PropertyValue
    81 Na5a764ea3cb346d8b88bd4f1378a518d rdf:first sg:person.014500240067.57
    82 rdf:rest rdf:nil
    83 Nae9a87659ec947c4a5a00c078bcf2e4a schema:volumeNumber 97
    84 rdf:type schema:PublicationVolume
    85 Nc09af0b1cfd94d088f30d42dd4eef315 rdf:first sg:person.016704376313.20
    86 rdf:rest Na5a764ea3cb346d8b88bd4f1378a518d
    87 Ncfad29c86ca948aa84e9a87b3ebfc7f3 schema:name Springer Nature - SN SciGraph project
    88 rdf:type schema:Organization
    89 Nf33f272d2dea4158a9bf2e7d94c9f5b4 schema:name dimensions_id
    90 schema:value pub.1103687202
    91 rdf:type schema:PropertyValue
    92 Nfe46ddee1d2f434a93b50ed58c7754bc rdf:first N73e42fc709e74f618accfb39de78e595
    93 rdf:rest Nc09af0b1cfd94d088f30d42dd4eef315
    94 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    95 schema:name Engineering
    96 rdf:type schema:DefinedTerm
    97 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
    98 schema:name Materials Engineering
    99 rdf:type schema:DefinedTerm
    100 sg:journal.1043671 schema:issn 0268-3768
    101 1433-3015
    102 schema:name The International Journal of Advanced Manufacturing Technology
    103 rdf:type schema:Periodical
    104 sg:person.014500240067.57 schema:affiliation https://www.grid.ac/institutes/grid.64938.30
    105 schema:familyName Zhu
    106 schema:givenName Yejun
    107 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014500240067.57
    108 rdf:type schema:Person
    109 sg:person.016704376313.20 schema:affiliation https://www.grid.ac/institutes/grid.64938.30
    110 schema:familyName Ding
    111 schema:givenName Wenfeng
    112 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016704376313.20
    113 rdf:type schema:Person
    114 sg:pub.10.1007/s00170-006-0519-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1016690618
    115 https://doi.org/10.1007/s00170-006-0519-1
    116 rdf:type schema:CreativeWork
    117 sg:pub.10.1007/s00170-010-2643-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1042220937
    118 https://doi.org/10.1007/s00170-010-2643-1
    119 rdf:type schema:CreativeWork
    120 sg:pub.10.1007/s00170-011-3479-z schema:sameAs https://app.dimensions.ai/details/publication/pub.1008137317
    121 https://doi.org/10.1007/s00170-011-3479-z
    122 rdf:type schema:CreativeWork
    123 sg:pub.10.1007/s00170-014-6403-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1053398442
    124 https://doi.org/10.1007/s00170-014-6403-5
    125 rdf:type schema:CreativeWork
    126 sg:pub.10.1007/s00170-015-7125-z schema:sameAs https://app.dimensions.ai/details/publication/pub.1010102266
    127 https://doi.org/10.1007/s00170-015-7125-z
    128 rdf:type schema:CreativeWork
    129 sg:pub.10.1007/s00170-015-7265-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1039986737
    130 https://doi.org/10.1007/s00170-015-7265-1
    131 rdf:type schema:CreativeWork
    132 sg:pub.10.1007/s00170-015-7896-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1024907449
    133 https://doi.org/10.1007/s00170-015-7896-2
    134 rdf:type schema:CreativeWork
    135 sg:pub.10.1007/s00170-017-0037-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1054082439
    136 https://doi.org/10.1007/s00170-017-0037-3
    137 rdf:type schema:CreativeWork
    138 sg:pub.10.1007/s00170-017-0471-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1085430084
    139 https://doi.org/10.1007/s00170-017-0471-2
    140 rdf:type schema:CreativeWork
    141 sg:pub.10.1007/s00170-017-0523-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1085846054
    142 https://doi.org/10.1007/s00170-017-0523-7
    143 rdf:type schema:CreativeWork
    144 sg:pub.10.1007/s00170-017-0668-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1090324918
    145 https://doi.org/10.1007/s00170-017-0668-4
    146 rdf:type schema:CreativeWork
    147 sg:pub.10.1007/s00170-017-1005-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1091388076
    148 https://doi.org/10.1007/s00170-017-1005-7
    149 rdf:type schema:CreativeWork
    150 https://doi.org/10.1016/0924-0136(95)02026-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1041131146
    151 rdf:type schema:CreativeWork
    152 https://doi.org/10.1016/b978-0-444-81901-7.50067-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1002546158
    153 rdf:type schema:CreativeWork
    154 https://doi.org/10.1016/j.apsusc.2017.08.064 schema:sameAs https://app.dimensions.ai/details/publication/pub.1091244562
    155 rdf:type schema:CreativeWork
    156 https://doi.org/10.1016/j.cirp.2007.05.075 schema:sameAs https://app.dimensions.ai/details/publication/pub.1016842776
    157 rdf:type schema:CreativeWork
    158 https://doi.org/10.1016/j.cirp.2014.03.024 schema:sameAs https://app.dimensions.ai/details/publication/pub.1024263550
    159 rdf:type schema:CreativeWork
    160 https://doi.org/10.1016/j.cirp.2015.05.004 schema:sameAs https://app.dimensions.ai/details/publication/pub.1042785281
    161 rdf:type schema:CreativeWork
    162 https://doi.org/10.1016/j.ijmachtools.2008.03.008 schema:sameAs https://app.dimensions.ai/details/publication/pub.1014170590
    163 rdf:type schema:CreativeWork
    164 https://doi.org/10.1016/j.ijmachtools.2014.11.010 schema:sameAs https://app.dimensions.ai/details/publication/pub.1046365844
    165 rdf:type schema:CreativeWork
    166 https://doi.org/10.1016/j.ijmachtools.2016.12.001 schema:sameAs https://app.dimensions.ai/details/publication/pub.1004706945
    167 rdf:type schema:CreativeWork
    168 https://doi.org/10.1016/j.ijmachtools.2017.04.013 schema:sameAs https://app.dimensions.ai/details/publication/pub.1085129755
    169 rdf:type schema:CreativeWork
    170 https://doi.org/10.1016/j.ijmachtools.2017.06.002 schema:sameAs https://app.dimensions.ai/details/publication/pub.1086030563
    171 rdf:type schema:CreativeWork
    172 https://doi.org/10.1016/j.ijmachtools.2017.06.003 schema:sameAs https://app.dimensions.ai/details/publication/pub.1086031747
    173 rdf:type schema:CreativeWork
    174 https://doi.org/10.1016/j.jallcom.2017.08.024 schema:sameAs https://app.dimensions.ai/details/publication/pub.1091053933
    175 rdf:type schema:CreativeWork
    176 https://doi.org/10.1016/j.jmapro.2015.12.004 schema:sameAs https://app.dimensions.ai/details/publication/pub.1003806915
    177 rdf:type schema:CreativeWork
    178 https://doi.org/10.1016/j.mssp.2017.06.031 schema:sameAs https://app.dimensions.ai/details/publication/pub.1086127004
    179 rdf:type schema:CreativeWork
    180 https://doi.org/10.1016/j.precisioneng.2017.05.012 schema:sameAs https://app.dimensions.ai/details/publication/pub.1085454521
    181 rdf:type schema:CreativeWork
    182 https://doi.org/10.1016/j.procir.2015.03.053 schema:sameAs https://app.dimensions.ai/details/publication/pub.1011266793
    183 rdf:type schema:CreativeWork
    184 https://doi.org/10.1016/s0921-5093(97)00457-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1041460211
    185 rdf:type schema:CreativeWork
    186 https://doi.org/10.1016/s0924-0136(01)01024-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1004542436
    187 rdf:type schema:CreativeWork
    188 https://doi.org/10.1016/s0924-0136(02)00656-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1053692356
    189 rdf:type schema:CreativeWork
    190 https://doi.org/10.1016/s1000-9361(09)60247-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1003547879
    191 rdf:type schema:CreativeWork
    192 https://doi.org/10.1080/002075497195768 schema:sameAs https://app.dimensions.ai/details/publication/pub.1040666225
    193 rdf:type schema:CreativeWork
    194 https://doi.org/10.1081/amp-100104300 schema:sameAs https://app.dimensions.ai/details/publication/pub.1002651904
    195 rdf:type schema:CreativeWork
    196 https://doi.org/10.1115/1.1343458 schema:sameAs https://app.dimensions.ai/details/publication/pub.1062068198
    197 rdf:type schema:CreativeWork
    198 https://doi.org/10.1115/1.1644547 schema:sameAs https://app.dimensions.ai/details/publication/pub.1062073485
    199 rdf:type schema:CreativeWork
    200 https://doi.org/10.1115/1.1760763 schema:sameAs https://app.dimensions.ai/details/publication/pub.1062074184
    201 rdf:type schema:CreativeWork
    202 https://doi.org/10.1115/1.1763181 schema:sameAs https://app.dimensions.ai/details/publication/pub.1062074219
    203 rdf:type schema:CreativeWork
    204 https://doi.org/10.1177/0954405414531114 schema:sameAs https://app.dimensions.ai/details/publication/pub.1063882985
    205 rdf:type schema:CreativeWork
    206 https://doi.org/10.4028/www.scientific.net/amm.853.28 schema:sameAs https://app.dimensions.ai/details/publication/pub.1072004065
    207 rdf:type schema:CreativeWork
    208 https://doi.org/10.4028/www.scientific.net/amr.797.511 schema:sameAs https://app.dimensions.ai/details/publication/pub.1000923028
    209 rdf:type schema:CreativeWork
    210 https://www.grid.ac/institutes/grid.64938.30 schema:alternateName Nanjing University of Aeronautics and Astronautics
    211 schema:name College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, 210016, Nanjing, People’s Republic of China
    212 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...