Experimental investigation of tribo-mechanical and chemical properties of TiN PVD coating on titanium substrate for biomedical implants manufacturing View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2019-01-07

AUTHORS

Ghulam Moeen Uddin, Muhammad Jawad, Muhammad Ghufran, Muhammad Wajid Saleem, Mohsin Ali Raza, Zaeem Ur Rehman, Syed Muhammad Arafat, Muhammad Irfan, Bilal Waseem

ABSTRACT

Tribological, mechanical, and chemical properties of the TiN coatings on Ti substrate were experimentally investigated for implant applications. X-ray diffraction (XRD) demonstrated that the principal crystal structure of TiN coating was (111) preferred orientation with FCC structure. Experimental evaluation was conducted at two substrate surface roughness, i.e., 0.1 μm and 0.4 μm. TiN coatings having 0.4-μm substrate surface roughness and approximately 3.3-μm coating thickness demonstrated optimum results of adhesion strength, hardness, coefficient of friction, wear rate, and corrosion rate in simulation body fluid (SBF). The selected TiN-coated sample exhibited maximum of 16.585 GPa hardness, 238.7 GPa elastic modulus, approximately 20 N adhesion, and 0.088 coefficient of friction. TiN coating showed approximately 8 times more corrosion resistance and 4 times more wear resistance than the bare titanium substrate. Energy dispersive spectroscopy (EDS) analysis of the wear tracks of TiN coating in SBF showed no presence of any harmful ingredients and confirmed its biocompatibility over the usage time in SBF. TiN-coated sample with higher substrate surface roughness (0.4 μm) demonstrated better tribo-mechanical properties and could reduce the cost of production than the conventionally used TiN-coated Ti implants of lower substrate surface roughness (0.1 μm). More... »

PAGES

1-14

References to SciGraph publications

  • 1998-06. Microstructure and hardness of hollow cathode discharge ion-plated titanium nitride film in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s00170-018-03244-2

    DOI

    http://dx.doi.org/10.1007/s00170-018-03244-2

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1111243855


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Materials Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "University of Engineering and Technology Lahore", 
              "id": "https://www.grid.ac/institutes/grid.444938.6", 
              "name": [
                "Department of Mechanical Engineering, University of Engineering & Technology, 54890, Lahore, Pakistan"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Uddin", 
            "givenName": "Ghulam Moeen", 
            "id": "sg:person.015561422376.37", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015561422376.37"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "University of Engineering and Technology Lahore", 
              "id": "https://www.grid.ac/institutes/grid.444938.6", 
              "name": [
                "Department of Mechanical Engineering, University of Engineering & Technology, 54890, Lahore, Pakistan"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Jawad", 
            "givenName": "Muhammad", 
            "id": "sg:person.012171106507.34", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012171106507.34"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "University of Engineering and Technology Lahore", 
              "id": "https://www.grid.ac/institutes/grid.444938.6", 
              "name": [
                "Department of Mechanical Engineering, University of Engineering & Technology, 54890, Lahore, Pakistan"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Ghufran", 
            "givenName": "Muhammad", 
            "id": "sg:person.010415577044.02", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010415577044.02"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "University of Engineering and Technology Lahore", 
              "id": "https://www.grid.ac/institutes/grid.444938.6", 
              "name": [
                "Department of Mechanical Engineering, University of Engineering & Technology, 54890, Lahore, Pakistan"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Saleem", 
            "givenName": "Muhammad Wajid", 
            "id": "sg:person.010252573415.49", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010252573415.49"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "University of the Punjab", 
              "id": "https://www.grid.ac/institutes/grid.11173.35", 
              "name": [
                "Department of Metallurgy and Materials Engineering, CEET, University of the Punjab, Lahore, Pakistan"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Raza", 
            "givenName": "Mohsin Ali", 
            "id": "sg:person.010324476376.24", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010324476376.24"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "University of the Punjab", 
              "id": "https://www.grid.ac/institutes/grid.11173.35", 
              "name": [
                "Department of Metallurgy and Materials Engineering, CEET, University of the Punjab, Lahore, Pakistan"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Rehman", 
            "givenName": "Zaeem Ur", 
            "id": "sg:person.015167006535.22", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015167006535.22"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "University of Engineering and Technology Lahore", 
              "id": "https://www.grid.ac/institutes/grid.444938.6", 
              "name": [
                "Department of Mechanical Engineering, University of Engineering & Technology, 54890, Lahore, Pakistan"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Arafat", 
            "givenName": "Syed Muhammad", 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Pakistan Council of Scientific & Industrial Research", 
              "id": "https://www.grid.ac/institutes/grid.420148.b", 
              "name": [
                "PITMAEM, PCSIR Laboratories Complex, Lahore, Pakistan"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Irfan", 
            "givenName": "Muhammad", 
            "id": "sg:person.010505271200.36", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010505271200.36"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Pakistan Council of Scientific & Industrial Research", 
              "id": "https://www.grid.ac/institutes/grid.420148.b", 
              "name": [
                "PITMAEM, PCSIR Laboratories Complex, Lahore, Pakistan"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Waseem", 
            "givenName": "Bilal", 
            "id": "sg:person.010752744500.31", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010752744500.31"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "https://doi.org/10.1016/s0043-1648(00)00488-9", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1000668050"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.surfcoat.2005.03.036", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1006406243"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.apsusc.2015.07.126", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1007186424"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.wear.2004.10.005", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1010416561"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.msea.2005.09.121", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1011786796"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1108/00368790310470903", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1012676453"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1002/1527-2648(200007)2:7<416::aid-adem416>3.0.co;2-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1012994551"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1590/s1678-58782009000400007", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1015556417"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0043-1648(03)00194-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1016102543"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0043-1648(03)00194-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1016102543"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.msec.2014.12.059", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1018348124"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.surfcoat.2013.03.009", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1019181423"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.bulcan.2015.03.009", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1019942573"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.surfcoat.2010.02.007", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1020371687"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.electacta.2009.02.004", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1021543869"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.msec.2004.08.018", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1023094887"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.actbio.2014.02.027", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1024892853"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1177/0885328210377534", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027980067"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1177/0885328210377534", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1027980067"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.pmatsci.2012.09.001", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1028160470"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1044-5803(02)00192-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1028702810"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.dental.2013.12.011", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1029218095"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.apsusc.2012.03.163", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1030521172"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.surfcoat.2011.05.004", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1032996594"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.actbio.2006.08.009", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1033153024"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.ceramint.2011.07.030", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1033430215"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/105994998770347756", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1036717294", 
              "https://doi.org/10.1361/105994998770347756"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.actamat.2003.11.020", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1038092118"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.surfcoat.2006.10.031", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1038568894"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.msec.2016.10.033", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1040789698"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.triboint.2005.04.013", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1043361639"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1557/jmr.1992.1564", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1043643805"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.ceramint.2010.10.025", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1044582299"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.apsusc.2016.06.024", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1046508717"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.tsf.2003.08.047", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1051666598"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.surfcoat.2009.06.010", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1052639746"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1142/s0218625x08011524", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1062980422"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1875-5372(17)30057-7", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1084717677"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jmbbm.2017.09.007", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1091490783"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1875-5372(17)30140-6", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1091889761"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.surfcoat.2018.03.019", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1101392707"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2019-01-07", 
        "datePublishedReg": "2019-01-07", 
        "description": "Tribological, mechanical, and chemical properties of the TiN coatings on Ti substrate were experimentally investigated for implant applications. X-ray diffraction (XRD) demonstrated that the principal crystal structure of TiN coating was (111) preferred orientation with FCC structure. Experimental evaluation was conducted at two substrate surface roughness, i.e., 0.1 \u03bcm and 0.4 \u03bcm. TiN coatings having 0.4-\u03bcm substrate surface roughness and approximately 3.3-\u03bcm coating thickness demonstrated optimum results of adhesion strength, hardness, coefficient of friction, wear rate, and corrosion rate in simulation body fluid (SBF). The selected TiN-coated sample exhibited maximum of 16.585 GPa hardness, 238.7 GPa elastic modulus, approximately 20 N adhesion, and 0.088 coefficient of friction. TiN coating showed approximately 8 times more corrosion resistance and 4 times more wear resistance than the bare titanium substrate. Energy dispersive spectroscopy (EDS) analysis of the wear tracks of TiN coating in SBF showed no presence of any harmful ingredients and confirmed its biocompatibility over the usage time in SBF. TiN-coated sample with higher substrate surface roughness (0.4 \u03bcm) demonstrated better tribo-mechanical properties and could reduce the cost of production than the conventionally used TiN-coated Ti implants of lower substrate surface roughness (0.1 \u03bcm).", 
        "genre": "research_article", 
        "id": "sg:pub.10.1007/s00170-018-03244-2", 
        "inLanguage": [
          "en"
        ], 
        "isAccessibleForFree": false, 
        "isPartOf": [
          {
            "id": "sg:journal.1043671", 
            "issn": [
              "0268-3768", 
              "1433-3015"
            ], 
            "name": "The International Journal of Advanced Manufacturing Technology", 
            "type": "Periodical"
          }
        ], 
        "name": "Experimental investigation of tribo-mechanical and chemical properties of TiN PVD coating on titanium substrate for biomedical implants manufacturing", 
        "pagination": "1-14", 
        "productId": [
          {
            "name": "readcube_id", 
            "type": "PropertyValue", 
            "value": [
              "263de4d5b25eb23b3c3452fd2d55fef0c84e0f116f5b942e32e3607ba2406450"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s00170-018-03244-2"
            ]
          }, 
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1111243855"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s00170-018-03244-2", 
          "https://app.dimensions.ai/details/publication/pub.1111243855"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2019-04-11T08:36", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000314_0000000314/records_55844_00000000.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "https://link.springer.com/10.1007%2Fs00170-018-03244-2"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s00170-018-03244-2'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s00170-018-03244-2'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s00170-018-03244-2'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s00170-018-03244-2'


     

    This table displays all metadata directly associated to this object as RDF triples.

    234 TRIPLES      21 PREDICATES      63 URIs      16 LITERALS      5 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s00170-018-03244-2 schema:about anzsrc-for:09
    2 anzsrc-for:0912
    3 schema:author N850aac739fbe49f1b858d6931c81e1ab
    4 schema:citation sg:pub.10.1361/105994998770347756
    5 https://doi.org/10.1002/1527-2648(200007)2:7<416::aid-adem416>3.0.co;2-y
    6 https://doi.org/10.1016/j.actamat.2003.11.020
    7 https://doi.org/10.1016/j.actbio.2006.08.009
    8 https://doi.org/10.1016/j.actbio.2014.02.027
    9 https://doi.org/10.1016/j.apsusc.2012.03.163
    10 https://doi.org/10.1016/j.apsusc.2015.07.126
    11 https://doi.org/10.1016/j.apsusc.2016.06.024
    12 https://doi.org/10.1016/j.bulcan.2015.03.009
    13 https://doi.org/10.1016/j.ceramint.2010.10.025
    14 https://doi.org/10.1016/j.ceramint.2011.07.030
    15 https://doi.org/10.1016/j.dental.2013.12.011
    16 https://doi.org/10.1016/j.electacta.2009.02.004
    17 https://doi.org/10.1016/j.jmbbm.2017.09.007
    18 https://doi.org/10.1016/j.msea.2005.09.121
    19 https://doi.org/10.1016/j.msec.2004.08.018
    20 https://doi.org/10.1016/j.msec.2014.12.059
    21 https://doi.org/10.1016/j.msec.2016.10.033
    22 https://doi.org/10.1016/j.pmatsci.2012.09.001
    23 https://doi.org/10.1016/j.surfcoat.2005.03.036
    24 https://doi.org/10.1016/j.surfcoat.2006.10.031
    25 https://doi.org/10.1016/j.surfcoat.2009.06.010
    26 https://doi.org/10.1016/j.surfcoat.2010.02.007
    27 https://doi.org/10.1016/j.surfcoat.2011.05.004
    28 https://doi.org/10.1016/j.surfcoat.2013.03.009
    29 https://doi.org/10.1016/j.surfcoat.2018.03.019
    30 https://doi.org/10.1016/j.triboint.2005.04.013
    31 https://doi.org/10.1016/j.tsf.2003.08.047
    32 https://doi.org/10.1016/j.wear.2004.10.005
    33 https://doi.org/10.1016/s0043-1648(00)00488-9
    34 https://doi.org/10.1016/s0043-1648(03)00194-7
    35 https://doi.org/10.1016/s1044-5803(02)00192-4
    36 https://doi.org/10.1016/s1875-5372(17)30057-7
    37 https://doi.org/10.1016/s1875-5372(17)30140-6
    38 https://doi.org/10.1108/00368790310470903
    39 https://doi.org/10.1142/s0218625x08011524
    40 https://doi.org/10.1177/0885328210377534
    41 https://doi.org/10.1557/jmr.1992.1564
    42 https://doi.org/10.1590/s1678-58782009000400007
    43 schema:datePublished 2019-01-07
    44 schema:datePublishedReg 2019-01-07
    45 schema:description Tribological, mechanical, and chemical properties of the TiN coatings on Ti substrate were experimentally investigated for implant applications. X-ray diffraction (XRD) demonstrated that the principal crystal structure of TiN coating was (111) preferred orientation with FCC structure. Experimental evaluation was conducted at two substrate surface roughness, i.e., 0.1 μm and 0.4 μm. TiN coatings having 0.4-μm substrate surface roughness and approximately 3.3-μm coating thickness demonstrated optimum results of adhesion strength, hardness, coefficient of friction, wear rate, and corrosion rate in simulation body fluid (SBF). The selected TiN-coated sample exhibited maximum of 16.585 GPa hardness, 238.7 GPa elastic modulus, approximately 20 N adhesion, and 0.088 coefficient of friction. TiN coating showed approximately 8 times more corrosion resistance and 4 times more wear resistance than the bare titanium substrate. Energy dispersive spectroscopy (EDS) analysis of the wear tracks of TiN coating in SBF showed no presence of any harmful ingredients and confirmed its biocompatibility over the usage time in SBF. TiN-coated sample with higher substrate surface roughness (0.4 μm) demonstrated better tribo-mechanical properties and could reduce the cost of production than the conventionally used TiN-coated Ti implants of lower substrate surface roughness (0.1 μm).
    46 schema:genre research_article
    47 schema:inLanguage en
    48 schema:isAccessibleForFree false
    49 schema:isPartOf sg:journal.1043671
    50 schema:name Experimental investigation of tribo-mechanical and chemical properties of TiN PVD coating on titanium substrate for biomedical implants manufacturing
    51 schema:pagination 1-14
    52 schema:productId N922d0b10ab7849cf850fcd5288a619ac
    53 N9a97f80ea3f0439583519311432c0bdc
    54 Nfd63b2231cdf43fe97c1f863bae03974
    55 schema:sameAs https://app.dimensions.ai/details/publication/pub.1111243855
    56 https://doi.org/10.1007/s00170-018-03244-2
    57 schema:sdDatePublished 2019-04-11T08:36
    58 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    59 schema:sdPublisher N8455c46d0c41425ca975b8926df9c798
    60 schema:url https://link.springer.com/10.1007%2Fs00170-018-03244-2
    61 sgo:license sg:explorer/license/
    62 sgo:sdDataset articles
    63 rdf:type schema:ScholarlyArticle
    64 N0bf8ac90422a41b09f1abd2d9c126d5a rdf:first N269d20c95a1740c9b3c9128636ea6b20
    65 rdf:rest N8d969f83310c4e26b9af88f121b41974
    66 N198e2e29975c4372a8ae754d1972f98e rdf:first sg:person.010752744500.31
    67 rdf:rest rdf:nil
    68 N248790afbd844258a9c8b04485f488c7 rdf:first sg:person.010252573415.49
    69 rdf:rest Nfe593a74e81547f68ad3724b67fbb3d2
    70 N269d20c95a1740c9b3c9128636ea6b20 schema:affiliation https://www.grid.ac/institutes/grid.444938.6
    71 schema:familyName Arafat
    72 schema:givenName Syed Muhammad
    73 rdf:type schema:Person
    74 N72e26bba7e1e4477afa9171310899e25 rdf:first sg:person.012171106507.34
    75 rdf:rest Nb2fca282dc3c49788522657d2e824620
    76 N8455c46d0c41425ca975b8926df9c798 schema:name Springer Nature - SN SciGraph project
    77 rdf:type schema:Organization
    78 N850aac739fbe49f1b858d6931c81e1ab rdf:first sg:person.015561422376.37
    79 rdf:rest N72e26bba7e1e4477afa9171310899e25
    80 N8d969f83310c4e26b9af88f121b41974 rdf:first sg:person.010505271200.36
    81 rdf:rest N198e2e29975c4372a8ae754d1972f98e
    82 N922d0b10ab7849cf850fcd5288a619ac schema:name doi
    83 schema:value 10.1007/s00170-018-03244-2
    84 rdf:type schema:PropertyValue
    85 N9a97f80ea3f0439583519311432c0bdc schema:name readcube_id
    86 schema:value 263de4d5b25eb23b3c3452fd2d55fef0c84e0f116f5b942e32e3607ba2406450
    87 rdf:type schema:PropertyValue
    88 Nb2fca282dc3c49788522657d2e824620 rdf:first sg:person.010415577044.02
    89 rdf:rest N248790afbd844258a9c8b04485f488c7
    90 Nbe1a77afdf1144b8baf0ffff0e6a5788 rdf:first sg:person.015167006535.22
    91 rdf:rest N0bf8ac90422a41b09f1abd2d9c126d5a
    92 Nfd63b2231cdf43fe97c1f863bae03974 schema:name dimensions_id
    93 schema:value pub.1111243855
    94 rdf:type schema:PropertyValue
    95 Nfe593a74e81547f68ad3724b67fbb3d2 rdf:first sg:person.010324476376.24
    96 rdf:rest Nbe1a77afdf1144b8baf0ffff0e6a5788
    97 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    98 schema:name Engineering
    99 rdf:type schema:DefinedTerm
    100 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
    101 schema:name Materials Engineering
    102 rdf:type schema:DefinedTerm
    103 sg:journal.1043671 schema:issn 0268-3768
    104 1433-3015
    105 schema:name The International Journal of Advanced Manufacturing Technology
    106 rdf:type schema:Periodical
    107 sg:person.010252573415.49 schema:affiliation https://www.grid.ac/institutes/grid.444938.6
    108 schema:familyName Saleem
    109 schema:givenName Muhammad Wajid
    110 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010252573415.49
    111 rdf:type schema:Person
    112 sg:person.010324476376.24 schema:affiliation https://www.grid.ac/institutes/grid.11173.35
    113 schema:familyName Raza
    114 schema:givenName Mohsin Ali
    115 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010324476376.24
    116 rdf:type schema:Person
    117 sg:person.010415577044.02 schema:affiliation https://www.grid.ac/institutes/grid.444938.6
    118 schema:familyName Ghufran
    119 schema:givenName Muhammad
    120 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010415577044.02
    121 rdf:type schema:Person
    122 sg:person.010505271200.36 schema:affiliation https://www.grid.ac/institutes/grid.420148.b
    123 schema:familyName Irfan
    124 schema:givenName Muhammad
    125 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010505271200.36
    126 rdf:type schema:Person
    127 sg:person.010752744500.31 schema:affiliation https://www.grid.ac/institutes/grid.420148.b
    128 schema:familyName Waseem
    129 schema:givenName Bilal
    130 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010752744500.31
    131 rdf:type schema:Person
    132 sg:person.012171106507.34 schema:affiliation https://www.grid.ac/institutes/grid.444938.6
    133 schema:familyName Jawad
    134 schema:givenName Muhammad
    135 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012171106507.34
    136 rdf:type schema:Person
    137 sg:person.015167006535.22 schema:affiliation https://www.grid.ac/institutes/grid.11173.35
    138 schema:familyName Rehman
    139 schema:givenName Zaeem Ur
    140 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015167006535.22
    141 rdf:type schema:Person
    142 sg:person.015561422376.37 schema:affiliation https://www.grid.ac/institutes/grid.444938.6
    143 schema:familyName Uddin
    144 schema:givenName Ghulam Moeen
    145 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015561422376.37
    146 rdf:type schema:Person
    147 sg:pub.10.1361/105994998770347756 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036717294
    148 https://doi.org/10.1361/105994998770347756
    149 rdf:type schema:CreativeWork
    150 https://doi.org/10.1002/1527-2648(200007)2:7<416::aid-adem416>3.0.co;2-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1012994551
    151 rdf:type schema:CreativeWork
    152 https://doi.org/10.1016/j.actamat.2003.11.020 schema:sameAs https://app.dimensions.ai/details/publication/pub.1038092118
    153 rdf:type schema:CreativeWork
    154 https://doi.org/10.1016/j.actbio.2006.08.009 schema:sameAs https://app.dimensions.ai/details/publication/pub.1033153024
    155 rdf:type schema:CreativeWork
    156 https://doi.org/10.1016/j.actbio.2014.02.027 schema:sameAs https://app.dimensions.ai/details/publication/pub.1024892853
    157 rdf:type schema:CreativeWork
    158 https://doi.org/10.1016/j.apsusc.2012.03.163 schema:sameAs https://app.dimensions.ai/details/publication/pub.1030521172
    159 rdf:type schema:CreativeWork
    160 https://doi.org/10.1016/j.apsusc.2015.07.126 schema:sameAs https://app.dimensions.ai/details/publication/pub.1007186424
    161 rdf:type schema:CreativeWork
    162 https://doi.org/10.1016/j.apsusc.2016.06.024 schema:sameAs https://app.dimensions.ai/details/publication/pub.1046508717
    163 rdf:type schema:CreativeWork
    164 https://doi.org/10.1016/j.bulcan.2015.03.009 schema:sameAs https://app.dimensions.ai/details/publication/pub.1019942573
    165 rdf:type schema:CreativeWork
    166 https://doi.org/10.1016/j.ceramint.2010.10.025 schema:sameAs https://app.dimensions.ai/details/publication/pub.1044582299
    167 rdf:type schema:CreativeWork
    168 https://doi.org/10.1016/j.ceramint.2011.07.030 schema:sameAs https://app.dimensions.ai/details/publication/pub.1033430215
    169 rdf:type schema:CreativeWork
    170 https://doi.org/10.1016/j.dental.2013.12.011 schema:sameAs https://app.dimensions.ai/details/publication/pub.1029218095
    171 rdf:type schema:CreativeWork
    172 https://doi.org/10.1016/j.electacta.2009.02.004 schema:sameAs https://app.dimensions.ai/details/publication/pub.1021543869
    173 rdf:type schema:CreativeWork
    174 https://doi.org/10.1016/j.jmbbm.2017.09.007 schema:sameAs https://app.dimensions.ai/details/publication/pub.1091490783
    175 rdf:type schema:CreativeWork
    176 https://doi.org/10.1016/j.msea.2005.09.121 schema:sameAs https://app.dimensions.ai/details/publication/pub.1011786796
    177 rdf:type schema:CreativeWork
    178 https://doi.org/10.1016/j.msec.2004.08.018 schema:sameAs https://app.dimensions.ai/details/publication/pub.1023094887
    179 rdf:type schema:CreativeWork
    180 https://doi.org/10.1016/j.msec.2014.12.059 schema:sameAs https://app.dimensions.ai/details/publication/pub.1018348124
    181 rdf:type schema:CreativeWork
    182 https://doi.org/10.1016/j.msec.2016.10.033 schema:sameAs https://app.dimensions.ai/details/publication/pub.1040789698
    183 rdf:type schema:CreativeWork
    184 https://doi.org/10.1016/j.pmatsci.2012.09.001 schema:sameAs https://app.dimensions.ai/details/publication/pub.1028160470
    185 rdf:type schema:CreativeWork
    186 https://doi.org/10.1016/j.surfcoat.2005.03.036 schema:sameAs https://app.dimensions.ai/details/publication/pub.1006406243
    187 rdf:type schema:CreativeWork
    188 https://doi.org/10.1016/j.surfcoat.2006.10.031 schema:sameAs https://app.dimensions.ai/details/publication/pub.1038568894
    189 rdf:type schema:CreativeWork
    190 https://doi.org/10.1016/j.surfcoat.2009.06.010 schema:sameAs https://app.dimensions.ai/details/publication/pub.1052639746
    191 rdf:type schema:CreativeWork
    192 https://doi.org/10.1016/j.surfcoat.2010.02.007 schema:sameAs https://app.dimensions.ai/details/publication/pub.1020371687
    193 rdf:type schema:CreativeWork
    194 https://doi.org/10.1016/j.surfcoat.2011.05.004 schema:sameAs https://app.dimensions.ai/details/publication/pub.1032996594
    195 rdf:type schema:CreativeWork
    196 https://doi.org/10.1016/j.surfcoat.2013.03.009 schema:sameAs https://app.dimensions.ai/details/publication/pub.1019181423
    197 rdf:type schema:CreativeWork
    198 https://doi.org/10.1016/j.surfcoat.2018.03.019 schema:sameAs https://app.dimensions.ai/details/publication/pub.1101392707
    199 rdf:type schema:CreativeWork
    200 https://doi.org/10.1016/j.triboint.2005.04.013 schema:sameAs https://app.dimensions.ai/details/publication/pub.1043361639
    201 rdf:type schema:CreativeWork
    202 https://doi.org/10.1016/j.tsf.2003.08.047 schema:sameAs https://app.dimensions.ai/details/publication/pub.1051666598
    203 rdf:type schema:CreativeWork
    204 https://doi.org/10.1016/j.wear.2004.10.005 schema:sameAs https://app.dimensions.ai/details/publication/pub.1010416561
    205 rdf:type schema:CreativeWork
    206 https://doi.org/10.1016/s0043-1648(00)00488-9 schema:sameAs https://app.dimensions.ai/details/publication/pub.1000668050
    207 rdf:type schema:CreativeWork
    208 https://doi.org/10.1016/s0043-1648(03)00194-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1016102543
    209 rdf:type schema:CreativeWork
    210 https://doi.org/10.1016/s1044-5803(02)00192-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1028702810
    211 rdf:type schema:CreativeWork
    212 https://doi.org/10.1016/s1875-5372(17)30057-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1084717677
    213 rdf:type schema:CreativeWork
    214 https://doi.org/10.1016/s1875-5372(17)30140-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1091889761
    215 rdf:type schema:CreativeWork
    216 https://doi.org/10.1108/00368790310470903 schema:sameAs https://app.dimensions.ai/details/publication/pub.1012676453
    217 rdf:type schema:CreativeWork
    218 https://doi.org/10.1142/s0218625x08011524 schema:sameAs https://app.dimensions.ai/details/publication/pub.1062980422
    219 rdf:type schema:CreativeWork
    220 https://doi.org/10.1177/0885328210377534 schema:sameAs https://app.dimensions.ai/details/publication/pub.1027980067
    221 rdf:type schema:CreativeWork
    222 https://doi.org/10.1557/jmr.1992.1564 schema:sameAs https://app.dimensions.ai/details/publication/pub.1043643805
    223 rdf:type schema:CreativeWork
    224 https://doi.org/10.1590/s1678-58782009000400007 schema:sameAs https://app.dimensions.ai/details/publication/pub.1015556417
    225 rdf:type schema:CreativeWork
    226 https://www.grid.ac/institutes/grid.11173.35 schema:alternateName University of the Punjab
    227 schema:name Department of Metallurgy and Materials Engineering, CEET, University of the Punjab, Lahore, Pakistan
    228 rdf:type schema:Organization
    229 https://www.grid.ac/institutes/grid.420148.b schema:alternateName Pakistan Council of Scientific & Industrial Research
    230 schema:name PITMAEM, PCSIR Laboratories Complex, Lahore, Pakistan
    231 rdf:type schema:Organization
    232 https://www.grid.ac/institutes/grid.444938.6 schema:alternateName University of Engineering and Technology Lahore
    233 schema:name Department of Mechanical Engineering, University of Engineering & Technology, 54890, Lahore, Pakistan
    234 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...