Development in plasma surface diffusion techniques of Ti-6Al-4V alloy: a review View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2017-03-22

AUTHORS

Ya-Zhe Xing, Gui Wang, Yong Zhang, Yong-Nan Chen, Matthew Dargusch

ABSTRACT

Ti-6Al-4V alloy has been widely used as an important structural material in aerospace, automotive, and chemical and biomedical industries due to its high specific strength and excellent corrosion resistance. However, the poor tribological properties and low resistance to high temperature oxidation limit extensive applications of the alloy. Plasma surface diffusion treatments, including plasma carbonizing, plasma nitriding, and plasma alloying treatments, contribute to improve wear resistance and the anti-oxidation property of the alloy by introducing other elements into the surface of the alloy to form hard surface layers under low pressure conditions. In this review article, the developments in microstructure and properties of the layers generated by the three techniques were reviewed systematically. In particular, the development in the phase determination of the plasma-nitrided layer was analyzed. New approaches in accelerating the diffusion of atoms and optimizing process were analyzed in detail. More... »

PAGES

1901-1912

References to SciGraph publications

  • 1990-10. Surface engineering and chemical characterization in ion-nitrided titanium and titanium alloys in JOURNAL OF MATERIALS SCIENCE
  • 2013-05-18. Surface modification of Ti-6Al-4V alloy by cathode assiting discharge setup and conventional plasma nitriding methods in SCIENCE CHINA TECHNOLOGICAL SCIENCES
  • 2007-12-14. Copper plating on titanium alloy 6-2-4-2 using an in situ high voltage pulse followed by plate-up in JOURNAL OF APPLIED ELECTROCHEMISTRY
  • 2008-02-27. Effect of Plasma Spraying Process on Microstructure and Microhardness of Titanium Alloy Substrate in JOURNAL OF THERMAL SPRAY TECHNOLOGY
  • 2006-11. Fatigue strength of an (α + β)-type titanium alloy Ti-6Al-4V produced by the electron-beam physical vapor deposition method in STRENGTH OF MATERIALS
  • <error retrieving object. in <ERROR RETRIEVING OBJECT
  • 2015-11-18. Development of plasma electrolytic oxidation for improved Ti6Al4V biomaterial surface properties in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2015-06-21. Evaluation of microstructure and wear properties of Ti-6Al-4V alloy plasma carbonized at different temperatures in JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATER. SCI. ED.
  • 1999-04. The effects of gas nitriding on fatigue behavior in titanium and titanium alloys in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2012-02-18. Influence of the composition of a plasma-forming gas on nitriding in a non-self-maintained glow discharge with a large hollow cathode in JOURNAL OF SURFACE INVESTIGATION: X-RAY, SYNCHROTRON AND NEUTRON TECHNIQUES
  • 1996-06. Surface nitridation of titanium metal by means of a gas tunnel type plasma jet in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s00170-017-0302-5

    DOI

    http://dx.doi.org/10.1007/s00170-017-0302-5

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1084019275


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Materials Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "Centre for Advanced Materials Processing and Manufacture, School of Mechanical and Mining Engineering, The University of Queensland, 4072, St Lucia, QLD, Australia", 
              "id": "http://www.grid.ac/institutes/grid.1003.2", 
              "name": [
                "School of Materials Science and Engineering, Chang\u2019an University, 710061, Xi\u2019an, China", 
                "Centre for Advanced Materials Processing and Manufacture, School of Mechanical and Mining Engineering, The University of Queensland, 4072, St Lucia, QLD, Australia"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Xing", 
            "givenName": "Ya-Zhe", 
            "id": "sg:person.014364041421.31", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014364041421.31"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Centre for Advanced Materials Processing and Manufacture, School of Mechanical and Mining Engineering, The University of Queensland, 4072, St Lucia, QLD, Australia", 
              "id": "http://www.grid.ac/institutes/grid.1003.2", 
              "name": [
                "Centre for Advanced Materials Processing and Manufacture, School of Mechanical and Mining Engineering, The University of Queensland, 4072, St Lucia, QLD, Australia"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Wang", 
            "givenName": "Gui", 
            "id": "sg:person.010407165157.76", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010407165157.76"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "School of Materials Science and Engineering, Chang\u2019an University, 710061, Xi\u2019an, China", 
              "id": "http://www.grid.ac/institutes/grid.440661.1", 
              "name": [
                "School of Materials Science and Engineering, Chang\u2019an University, 710061, Xi\u2019an, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Zhang", 
            "givenName": "Yong", 
            "id": "sg:person.07424553531.74", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07424553531.74"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "School of Materials Science and Engineering, Chang\u2019an University, 710061, Xi\u2019an, China", 
              "id": "http://www.grid.ac/institutes/grid.440661.1", 
              "name": [
                "School of Materials Science and Engineering, Chang\u2019an University, 710061, Xi\u2019an, China"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Chen", 
            "givenName": "Yong-Nan", 
            "id": "sg:person.07456442401.10", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07456442401.10"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Centre for Advanced Materials Processing and Manufacture, School of Mechanical and Mining Engineering, The University of Queensland, 4072, St Lucia, QLD, Australia", 
              "id": "http://www.grid.ac/institutes/grid.1003.2", 
              "name": [
                "Centre for Advanced Materials Processing and Manufacture, School of Mechanical and Mining Engineering, The University of Queensland, 4072, St Lucia, QLD, Australia"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Dargusch", 
            "givenName": "Matthew", 
            "id": "sg:person.012537155237.07", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012537155237.07"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "sg:pub.10.1134/s1027451012020115", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1035275025", 
              "https://doi.org/10.1134/s1027451012020115"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1361/105994999770346990", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1034317853", 
              "https://doi.org/10.1361/105994999770346990"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02663213", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1049107257", 
              "https://doi.org/10.1007/bf02663213"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11223-006-0086-6", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1049413646", 
              "https://doi.org/10.1007/s11223-006-0086-6"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11431-013-5252-z", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1048639422", 
              "https://doi.org/10.1007/s11431-013-5252-z"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf00581089", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1021063639", 
              "https://doi.org/10.1007/bf00581089"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02649339", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1040788368", 
              "https://doi.org/10.1007/bf02649339"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-015-8086-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1014701972", 
              "https://doi.org/10.1007/s00170-015-8086-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11595-015-1202-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1004417840", 
              "https://doi.org/10.1007/s11595-015-1202-x"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s10800-007-9468-0", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1018300453", 
              "https://doi.org/10.1007/s10800-007-9468-0"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s11666-007-9149-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1015900866", 
              "https://doi.org/10.1007/s11666-007-9149-x"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2017-03-22", 
        "datePublishedReg": "2017-03-22", 
        "description": "Ti-6Al-4V alloy has been widely used as an important structural material in aerospace, automotive, and chemical and biomedical industries due to its high specific strength and excellent corrosion resistance. However, the poor tribological properties and low resistance to high temperature oxidation limit extensive applications of the alloy. Plasma surface diffusion treatments, including plasma carbonizing, plasma nitriding, and plasma alloying treatments, contribute to improve wear resistance and the anti-oxidation property of the alloy by introducing other elements into the surface of the alloy to form hard surface layers under low pressure conditions. In this review article, the developments in microstructure and properties of the layers generated by the three techniques were reviewed systematically. In particular, the development in the phase determination of the plasma-nitrided layer was analyzed. New approaches in accelerating the diffusion of atoms and optimizing process were analyzed in detail.", 
        "genre": "article", 
        "id": "sg:pub.10.1007/s00170-017-0302-5", 
        "inLanguage": "en", 
        "isAccessibleForFree": false, 
        "isFundedItemOf": [
          {
            "id": "sg:grant.7182947", 
            "type": "MonetaryGrant"
          }
        ], 
        "isPartOf": [
          {
            "id": "sg:journal.1043671", 
            "issn": [
              "0268-3768", 
              "1433-3015"
            ], 
            "name": "The International Journal of Advanced Manufacturing Technology", 
            "publisher": "Springer Nature", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "5-8", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "92"
          }
        ], 
        "keywords": [
          "Ti-6Al-4V alloy", 
          "poor tribological properties", 
          "high specific strength", 
          "excellent corrosion resistance", 
          "hard surface layer", 
          "plasma-nitrided layer", 
          "high-temperature oxidation", 
          "important structural materials", 
          "anti-oxidation properties", 
          "wear resistance", 
          "corrosion resistance", 
          "tribological properties", 
          "alloying treatment", 
          "plasma nitriding", 
          "structural materials", 
          "diffusion treatment", 
          "low-pressure conditions", 
          "specific strength", 
          "diffusion of atoms", 
          "temperature oxidation", 
          "alloy", 
          "surface layer", 
          "pressure conditions", 
          "biomedical industry", 
          "low resistance", 
          "layer", 
          "optimizing process", 
          "extensive application", 
          "nitriding", 
          "properties", 
          "aerospace", 
          "microstructure", 
          "carbonizing", 
          "resistance", 
          "new approach", 
          "phase determination", 
          "strength", 
          "surface", 
          "materials", 
          "technique", 
          "diffusion", 
          "diffusion technique", 
          "applications", 
          "industry", 
          "oxidation", 
          "process", 
          "conditions", 
          "chemicals", 
          "detail", 
          "elements", 
          "development", 
          "determination", 
          "approach", 
          "review article", 
          "atoms", 
          "treatment", 
          "article", 
          "review"
        ], 
        "name": "Development in plasma surface diffusion techniques of Ti-6Al-4V alloy: a review", 
        "pagination": "1901-1912", 
        "productId": [
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1084019275"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s00170-017-0302-5"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s00170-017-0302-5", 
          "https://app.dimensions.ai/details/publication/pub.1084019275"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2022-05-20T07:33", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-springernature-scigraph/baseset/20220519/entities/gbq_results/article/article_745.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "https://doi.org/10.1007/s00170-017-0302-5"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s00170-017-0302-5'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s00170-017-0302-5'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s00170-017-0302-5'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s00170-017-0302-5'


     

    This table displays all metadata directly associated to this object as RDF triples.

    194 TRIPLES      22 PREDICATES      93 URIs      74 LITERALS      6 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s00170-017-0302-5 schema:about anzsrc-for:09
    2 anzsrc-for:0912
    3 schema:author N2c32e453f39341ed81c4a46d34d85e31
    4 schema:citation sg:pub.10.1007/bf00581089
    5 sg:pub.10.1007/bf02649339
    6 sg:pub.10.1007/bf02663213
    7 sg:pub.10.1007/s00170-015-8086-y
    8 sg:pub.10.1007/s10800-007-9468-0
    9 sg:pub.10.1007/s11223-006-0086-6
    10 sg:pub.10.1007/s11431-013-5252-z
    11 sg:pub.10.1007/s11595-015-1202-x
    12 sg:pub.10.1007/s11666-007-9149-x
    13 sg:pub.10.1134/s1027451012020115
    14 sg:pub.10.1361/105994999770346990
    15 schema:datePublished 2017-03-22
    16 schema:datePublishedReg 2017-03-22
    17 schema:description Ti-6Al-4V alloy has been widely used as an important structural material in aerospace, automotive, and chemical and biomedical industries due to its high specific strength and excellent corrosion resistance. However, the poor tribological properties and low resistance to high temperature oxidation limit extensive applications of the alloy. Plasma surface diffusion treatments, including plasma carbonizing, plasma nitriding, and plasma alloying treatments, contribute to improve wear resistance and the anti-oxidation property of the alloy by introducing other elements into the surface of the alloy to form hard surface layers under low pressure conditions. In this review article, the developments in microstructure and properties of the layers generated by the three techniques were reviewed systematically. In particular, the development in the phase determination of the plasma-nitrided layer was analyzed. New approaches in accelerating the diffusion of atoms and optimizing process were analyzed in detail.
    18 schema:genre article
    19 schema:inLanguage en
    20 schema:isAccessibleForFree false
    21 schema:isPartOf N088c59e432c7425eaa664fa029b7facd
    22 N32573e1109bc4ee0a2d6237381165b8f
    23 sg:journal.1043671
    24 schema:keywords Ti-6Al-4V alloy
    25 aerospace
    26 alloy
    27 alloying treatment
    28 anti-oxidation properties
    29 applications
    30 approach
    31 article
    32 atoms
    33 biomedical industry
    34 carbonizing
    35 chemicals
    36 conditions
    37 corrosion resistance
    38 detail
    39 determination
    40 development
    41 diffusion
    42 diffusion of atoms
    43 diffusion technique
    44 diffusion treatment
    45 elements
    46 excellent corrosion resistance
    47 extensive application
    48 hard surface layer
    49 high specific strength
    50 high-temperature oxidation
    51 important structural materials
    52 industry
    53 layer
    54 low resistance
    55 low-pressure conditions
    56 materials
    57 microstructure
    58 new approach
    59 nitriding
    60 optimizing process
    61 oxidation
    62 phase determination
    63 plasma nitriding
    64 plasma-nitrided layer
    65 poor tribological properties
    66 pressure conditions
    67 process
    68 properties
    69 resistance
    70 review
    71 review article
    72 specific strength
    73 strength
    74 structural materials
    75 surface
    76 surface layer
    77 technique
    78 temperature oxidation
    79 treatment
    80 tribological properties
    81 wear resistance
    82 schema:name Development in plasma surface diffusion techniques of Ti-6Al-4V alloy: a review
    83 schema:pagination 1901-1912
    84 schema:productId N1d4158b984a547d7818569c4890c3ff3
    85 N2800fa096bdd45a5abc46943a2887323
    86 schema:sameAs https://app.dimensions.ai/details/publication/pub.1084019275
    87 https://doi.org/10.1007/s00170-017-0302-5
    88 schema:sdDatePublished 2022-05-20T07:33
    89 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    90 schema:sdPublisher N12b8e677a34640b4841983c55e0e9a20
    91 schema:url https://doi.org/10.1007/s00170-017-0302-5
    92 sgo:license sg:explorer/license/
    93 sgo:sdDataset articles
    94 rdf:type schema:ScholarlyArticle
    95 N088c59e432c7425eaa664fa029b7facd schema:volumeNumber 92
    96 rdf:type schema:PublicationVolume
    97 N12b8e677a34640b4841983c55e0e9a20 schema:name Springer Nature - SN SciGraph project
    98 rdf:type schema:Organization
    99 N135e59f9fd904454a5e34fd6eeef9d12 rdf:first sg:person.012537155237.07
    100 rdf:rest rdf:nil
    101 N1d4158b984a547d7818569c4890c3ff3 schema:name doi
    102 schema:value 10.1007/s00170-017-0302-5
    103 rdf:type schema:PropertyValue
    104 N2800fa096bdd45a5abc46943a2887323 schema:name dimensions_id
    105 schema:value pub.1084019275
    106 rdf:type schema:PropertyValue
    107 N2c32e453f39341ed81c4a46d34d85e31 rdf:first sg:person.014364041421.31
    108 rdf:rest Naf9f2360410b42a39a69833779ba48ed
    109 N32573e1109bc4ee0a2d6237381165b8f schema:issueNumber 5-8
    110 rdf:type schema:PublicationIssue
    111 N69a571a707e143eaaf4506454df40c04 rdf:first sg:person.07424553531.74
    112 rdf:rest N935743dc44c64ebca97025c1b2995928
    113 N935743dc44c64ebca97025c1b2995928 rdf:first sg:person.07456442401.10
    114 rdf:rest N135e59f9fd904454a5e34fd6eeef9d12
    115 Naf9f2360410b42a39a69833779ba48ed rdf:first sg:person.010407165157.76
    116 rdf:rest N69a571a707e143eaaf4506454df40c04
    117 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    118 schema:name Engineering
    119 rdf:type schema:DefinedTerm
    120 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
    121 schema:name Materials Engineering
    122 rdf:type schema:DefinedTerm
    123 sg:grant.7182947 http://pending.schema.org/fundedItem sg:pub.10.1007/s00170-017-0302-5
    124 rdf:type schema:MonetaryGrant
    125 sg:journal.1043671 schema:issn 0268-3768
    126 1433-3015
    127 schema:name The International Journal of Advanced Manufacturing Technology
    128 schema:publisher Springer Nature
    129 rdf:type schema:Periodical
    130 sg:person.010407165157.76 schema:affiliation grid-institutes:grid.1003.2
    131 schema:familyName Wang
    132 schema:givenName Gui
    133 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010407165157.76
    134 rdf:type schema:Person
    135 sg:person.012537155237.07 schema:affiliation grid-institutes:grid.1003.2
    136 schema:familyName Dargusch
    137 schema:givenName Matthew
    138 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012537155237.07
    139 rdf:type schema:Person
    140 sg:person.014364041421.31 schema:affiliation grid-institutes:grid.1003.2
    141 schema:familyName Xing
    142 schema:givenName Ya-Zhe
    143 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014364041421.31
    144 rdf:type schema:Person
    145 sg:person.07424553531.74 schema:affiliation grid-institutes:grid.440661.1
    146 schema:familyName Zhang
    147 schema:givenName Yong
    148 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07424553531.74
    149 rdf:type schema:Person
    150 sg:person.07456442401.10 schema:affiliation grid-institutes:grid.440661.1
    151 schema:familyName Chen
    152 schema:givenName Yong-Nan
    153 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07456442401.10
    154 rdf:type schema:Person
    155 sg:pub.10.1007/bf00581089 schema:sameAs https://app.dimensions.ai/details/publication/pub.1021063639
    156 https://doi.org/10.1007/bf00581089
    157 rdf:type schema:CreativeWork
    158 sg:pub.10.1007/bf02649339 schema:sameAs https://app.dimensions.ai/details/publication/pub.1040788368
    159 https://doi.org/10.1007/bf02649339
    160 rdf:type schema:CreativeWork
    161 sg:pub.10.1007/bf02663213 schema:sameAs https://app.dimensions.ai/details/publication/pub.1049107257
    162 https://doi.org/10.1007/bf02663213
    163 rdf:type schema:CreativeWork
    164 sg:pub.10.1007/s00170-015-8086-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1014701972
    165 https://doi.org/10.1007/s00170-015-8086-y
    166 rdf:type schema:CreativeWork
    167 sg:pub.10.1007/s10800-007-9468-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1018300453
    168 https://doi.org/10.1007/s10800-007-9468-0
    169 rdf:type schema:CreativeWork
    170 sg:pub.10.1007/s11223-006-0086-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1049413646
    171 https://doi.org/10.1007/s11223-006-0086-6
    172 rdf:type schema:CreativeWork
    173 sg:pub.10.1007/s11431-013-5252-z schema:sameAs https://app.dimensions.ai/details/publication/pub.1048639422
    174 https://doi.org/10.1007/s11431-013-5252-z
    175 rdf:type schema:CreativeWork
    176 sg:pub.10.1007/s11595-015-1202-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1004417840
    177 https://doi.org/10.1007/s11595-015-1202-x
    178 rdf:type schema:CreativeWork
    179 sg:pub.10.1007/s11666-007-9149-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1015900866
    180 https://doi.org/10.1007/s11666-007-9149-x
    181 rdf:type schema:CreativeWork
    182 sg:pub.10.1134/s1027451012020115 schema:sameAs https://app.dimensions.ai/details/publication/pub.1035275025
    183 https://doi.org/10.1134/s1027451012020115
    184 rdf:type schema:CreativeWork
    185 sg:pub.10.1361/105994999770346990 schema:sameAs https://app.dimensions.ai/details/publication/pub.1034317853
    186 https://doi.org/10.1361/105994999770346990
    187 rdf:type schema:CreativeWork
    188 grid-institutes:grid.1003.2 schema:alternateName Centre for Advanced Materials Processing and Manufacture, School of Mechanical and Mining Engineering, The University of Queensland, 4072, St Lucia, QLD, Australia
    189 schema:name Centre for Advanced Materials Processing and Manufacture, School of Mechanical and Mining Engineering, The University of Queensland, 4072, St Lucia, QLD, Australia
    190 School of Materials Science and Engineering, Chang’an University, 710061, Xi’an, China
    191 rdf:type schema:Organization
    192 grid-institutes:grid.440661.1 schema:alternateName School of Materials Science and Engineering, Chang’an University, 710061, Xi’an, China
    193 schema:name School of Materials Science and Engineering, Chang’an University, 710061, Xi’an, China
    194 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...