Fabrication of complex circuit on printed circuit board (PCB) using electrochemical micro-machining View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2016-08

AUTHORS

Jitendra Singh, V. K. Jain, J. Ramkumar

ABSTRACT

Electrochemical micro-machining (ECMM) is an advanced machining process for machining of electrically conducting materials. In the present work, an experimental set-up for ECMM is used to fabricate complex circuits on a printed circuit board (PCB) by using a masking technique. Mask is made using 50 μm transparency sheet cut by laser beam. This mask is bonded on a printed circuit board of cross section 35 mm × 35 mm by a water-insoluble glue Araldite (epoxy adhesive). For the analysis of the data, the channel width of the circuit structure is measured with the help of photographs taken by Dino-Lite capture and optical microscope. For this purpose, the whole structure is divided into four regions, which have 58 points in which width has been measured. For the analysis of the depth of a channel, a dial gauge having 1 μm least count is used to measure the depth at different sections (or regions) as marked in the figure. For this purpose, the whole structure is divided into four regions, which have 27 points. After all the experiments have been completed, the circuit is compared with the main circuit which is fabricated by milling process and percentage error in the circuit is evaluated. More... »

PAGES

2073-2081

References to SciGraph publications

  • 2012-04. Some aspects of fabrication of micro devices by electrochemical micromachining (ECMM) and its finishing by magnetorheological fluid in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2007-01. A study of the characteristics for electrochemical micromachining with ultrashort voltage pulses in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2010-11. Finite element simulation and experimental study on the through-mask electrochemical micromachining (EMM) process in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2002-11. A Study on Electrochemical Micromachining for Fabrication of Microgrooves in an Air-Lubricated Hydrodynamic Bearing in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/s00170-015-7817-4

    DOI

    http://dx.doi.org/10.1007/s00170-015-7817-4

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1048710304


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0910", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Manufacturing Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "Indian Institute of Technology Kanpur", 
              "id": "https://www.grid.ac/institutes/grid.417965.8", 
              "name": [
                "Department of Mechanical Engineering, Indian Institute of Technology Kanpur, 208016, Kanpur, India"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Singh", 
            "givenName": "Jitendra", 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Indian Institute of Technology Kanpur", 
              "id": "https://www.grid.ac/institutes/grid.417965.8", 
              "name": [
                "Department of Mechanical Engineering, Indian Institute of Technology Kanpur, 208016, Kanpur, India"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Jain", 
            "givenName": "V. K.", 
            "id": "sg:person.010171773106.06", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010171773106.06"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Indian Institute of Technology Kanpur", 
              "id": "https://www.grid.ac/institutes/grid.417965.8", 
              "name": [
                "Department of Mechanical Engineering, Indian Institute of Technology Kanpur, 208016, Kanpur, India"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Ramkumar", 
            "givenName": "J.", 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "https://doi.org/10.1016/s0924-0136(03)00722-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1005000756"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0924-0136(03)00722-2", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1005000756"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0736-5845(02)00019-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1008574931"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.precisioneng.2003.07.004", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1009245104"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0007-8506(07)62809-1", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1017195683"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0013-4686(97)00147-3", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1019776820"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s0007-8506(07)60081-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1023490590"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1080/10910344.2015.1018533", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1030747601"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-005-0247-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1036299335", 
              "https://doi.org/10.1007/s00170-005-0247-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-005-0247-y", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1036299335", 
              "https://doi.org/10.1007/s00170-005-0247-y"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/s1000-9361(09)60257-0", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1037746595"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1149/1.2097055", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1042963097"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1016/j.jmatprotec.2005.04.074", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1045334373"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s001700200229", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1045520781", 
              "https://doi.org/10.1007/s001700200229"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-011-3563-4", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1050057203", 
              "https://doi.org/10.1007/s00170-011-3563-4"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-010-2610-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1050335648", 
              "https://doi.org/10.1007/s00170-010-2610-x"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/s00170-010-2610-x", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1050335648", 
              "https://doi.org/10.1007/s00170-010-2610-x"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1115/1.2826853", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1062086119"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "https://doi.org/10.1142/s0219686714500012", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1063003702"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "2016-08", 
        "datePublishedReg": "2016-08-01", 
        "description": "Electrochemical micro-machining (ECMM) is an advanced machining process for machining of electrically conducting materials. In the present work, an experimental set-up for ECMM is used to fabricate complex circuits on a printed circuit board (PCB) by using a masking technique. Mask is made using 50 \u03bcm transparency sheet cut by laser beam. This mask is bonded on a printed circuit board of cross section 35 mm \u00d7 35 mm by a water-insoluble glue Araldite (epoxy adhesive). For the analysis of the data, the channel width of the circuit structure is measured with the help of photographs taken by Dino-Lite capture and optical microscope. For this purpose, the whole structure is divided into four regions, which have 58 points in which width has been measured. For the analysis of the depth of a channel, a dial gauge having 1 \u03bcm least count is used to measure the depth at different sections (or regions) as marked in the figure. For this purpose, the whole structure is divided into four regions, which have 27 points. After all the experiments have been completed, the circuit is compared with the main circuit which is fabricated by milling process and percentage error in the circuit is evaluated.", 
        "genre": "research_article", 
        "id": "sg:pub.10.1007/s00170-015-7817-4", 
        "inLanguage": [
          "en"
        ], 
        "isAccessibleForFree": false, 
        "isPartOf": [
          {
            "id": "sg:journal.1043671", 
            "issn": [
              "0268-3768", 
              "1433-3015"
            ], 
            "name": "The International Journal of Advanced Manufacturing Technology", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "9-12", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "85"
          }
        ], 
        "name": "Fabrication of complex circuit on printed circuit board (PCB) using electrochemical micro-machining", 
        "pagination": "2073-2081", 
        "productId": [
          {
            "name": "readcube_id", 
            "type": "PropertyValue", 
            "value": [
              "e80beb1c58921924e2ce3c3488010cbc5852d48875490391115502f3ccf5a2c9"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/s00170-015-7817-4"
            ]
          }, 
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1048710304"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/s00170-015-7817-4", 
          "https://app.dimensions.ai/details/publication/pub.1048710304"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2019-04-10T16:43", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8669_00000516.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "http://link.springer.com/10.1007%2Fs00170-015-7817-4"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s00170-015-7817-4'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s00170-015-7817-4'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s00170-015-7817-4'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s00170-015-7817-4'


     

    This table displays all metadata directly associated to this object as RDF triples.

    125 TRIPLES      21 PREDICATES      43 URIs      19 LITERALS      7 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/s00170-015-7817-4 schema:about anzsrc-for:09
    2 anzsrc-for:0910
    3 schema:author N66ae53c6326b40f1b42d4ef67ee8e4ed
    4 schema:citation sg:pub.10.1007/s00170-005-0247-y
    5 sg:pub.10.1007/s00170-010-2610-x
    6 sg:pub.10.1007/s00170-011-3563-4
    7 sg:pub.10.1007/s001700200229
    8 https://doi.org/10.1016/j.jmatprotec.2005.04.074
    9 https://doi.org/10.1016/j.precisioneng.2003.07.004
    10 https://doi.org/10.1016/s0007-8506(07)60081-x
    11 https://doi.org/10.1016/s0007-8506(07)62809-1
    12 https://doi.org/10.1016/s0013-4686(97)00147-3
    13 https://doi.org/10.1016/s0736-5845(02)00019-4
    14 https://doi.org/10.1016/s0924-0136(03)00722-2
    15 https://doi.org/10.1016/s1000-9361(09)60257-0
    16 https://doi.org/10.1080/10910344.2015.1018533
    17 https://doi.org/10.1115/1.2826853
    18 https://doi.org/10.1142/s0219686714500012
    19 https://doi.org/10.1149/1.2097055
    20 schema:datePublished 2016-08
    21 schema:datePublishedReg 2016-08-01
    22 schema:description Electrochemical micro-machining (ECMM) is an advanced machining process for machining of electrically conducting materials. In the present work, an experimental set-up for ECMM is used to fabricate complex circuits on a printed circuit board (PCB) by using a masking technique. Mask is made using 50 μm transparency sheet cut by laser beam. This mask is bonded on a printed circuit board of cross section 35 mm × 35 mm by a water-insoluble glue Araldite (epoxy adhesive). For the analysis of the data, the channel width of the circuit structure is measured with the help of photographs taken by Dino-Lite capture and optical microscope. For this purpose, the whole structure is divided into four regions, which have 58 points in which width has been measured. For the analysis of the depth of a channel, a dial gauge having 1 μm least count is used to measure the depth at different sections (or regions) as marked in the figure. For this purpose, the whole structure is divided into four regions, which have 27 points. After all the experiments have been completed, the circuit is compared with the main circuit which is fabricated by milling process and percentage error in the circuit is evaluated.
    23 schema:genre research_article
    24 schema:inLanguage en
    25 schema:isAccessibleForFree false
    26 schema:isPartOf N0cb9735e0a2e4bcea7cee398d3042c1a
    27 N9e8835d114704d82a247d076a68d0989
    28 sg:journal.1043671
    29 schema:name Fabrication of complex circuit on printed circuit board (PCB) using electrochemical micro-machining
    30 schema:pagination 2073-2081
    31 schema:productId N56cc463466634a8ab849149fe616ffbd
    32 N62d133f041f34d748945e72ab4a978ff
    33 Nd407088e1e8d4302aa9f98a8c740d7a8
    34 schema:sameAs https://app.dimensions.ai/details/publication/pub.1048710304
    35 https://doi.org/10.1007/s00170-015-7817-4
    36 schema:sdDatePublished 2019-04-10T16:43
    37 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    38 schema:sdPublisher N1e2795841cea404eb4960f11e8c4721d
    39 schema:url http://link.springer.com/10.1007%2Fs00170-015-7817-4
    40 sgo:license sg:explorer/license/
    41 sgo:sdDataset articles
    42 rdf:type schema:ScholarlyArticle
    43 N05f0c7df0b1f4e89a433f18e6cc2b579 rdf:first sg:person.010171773106.06
    44 rdf:rest Nf91aa5855a00498099a91b734ce633cd
    45 N0cb9735e0a2e4bcea7cee398d3042c1a schema:volumeNumber 85
    46 rdf:type schema:PublicationVolume
    47 N1e2795841cea404eb4960f11e8c4721d schema:name Springer Nature - SN SciGraph project
    48 rdf:type schema:Organization
    49 N48106faf835e4cc5be039b3b899620d7 schema:affiliation https://www.grid.ac/institutes/grid.417965.8
    50 schema:familyName Ramkumar
    51 schema:givenName J.
    52 rdf:type schema:Person
    53 N56cc463466634a8ab849149fe616ffbd schema:name dimensions_id
    54 schema:value pub.1048710304
    55 rdf:type schema:PropertyValue
    56 N62d133f041f34d748945e72ab4a978ff schema:name doi
    57 schema:value 10.1007/s00170-015-7817-4
    58 rdf:type schema:PropertyValue
    59 N6482d3aec27d46889f6954ba2b2164c2 schema:affiliation https://www.grid.ac/institutes/grid.417965.8
    60 schema:familyName Singh
    61 schema:givenName Jitendra
    62 rdf:type schema:Person
    63 N66ae53c6326b40f1b42d4ef67ee8e4ed rdf:first N6482d3aec27d46889f6954ba2b2164c2
    64 rdf:rest N05f0c7df0b1f4e89a433f18e6cc2b579
    65 N9e8835d114704d82a247d076a68d0989 schema:issueNumber 9-12
    66 rdf:type schema:PublicationIssue
    67 Nd407088e1e8d4302aa9f98a8c740d7a8 schema:name readcube_id
    68 schema:value e80beb1c58921924e2ce3c3488010cbc5852d48875490391115502f3ccf5a2c9
    69 rdf:type schema:PropertyValue
    70 Nf91aa5855a00498099a91b734ce633cd rdf:first N48106faf835e4cc5be039b3b899620d7
    71 rdf:rest rdf:nil
    72 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    73 schema:name Engineering
    74 rdf:type schema:DefinedTerm
    75 anzsrc-for:0910 schema:inDefinedTermSet anzsrc-for:
    76 schema:name Manufacturing Engineering
    77 rdf:type schema:DefinedTerm
    78 sg:journal.1043671 schema:issn 0268-3768
    79 1433-3015
    80 schema:name The International Journal of Advanced Manufacturing Technology
    81 rdf:type schema:Periodical
    82 sg:person.010171773106.06 schema:affiliation https://www.grid.ac/institutes/grid.417965.8
    83 schema:familyName Jain
    84 schema:givenName V. K.
    85 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010171773106.06
    86 rdf:type schema:Person
    87 sg:pub.10.1007/s00170-005-0247-y schema:sameAs https://app.dimensions.ai/details/publication/pub.1036299335
    88 https://doi.org/10.1007/s00170-005-0247-y
    89 rdf:type schema:CreativeWork
    90 sg:pub.10.1007/s00170-010-2610-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1050335648
    91 https://doi.org/10.1007/s00170-010-2610-x
    92 rdf:type schema:CreativeWork
    93 sg:pub.10.1007/s00170-011-3563-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1050057203
    94 https://doi.org/10.1007/s00170-011-3563-4
    95 rdf:type schema:CreativeWork
    96 sg:pub.10.1007/s001700200229 schema:sameAs https://app.dimensions.ai/details/publication/pub.1045520781
    97 https://doi.org/10.1007/s001700200229
    98 rdf:type schema:CreativeWork
    99 https://doi.org/10.1016/j.jmatprotec.2005.04.074 schema:sameAs https://app.dimensions.ai/details/publication/pub.1045334373
    100 rdf:type schema:CreativeWork
    101 https://doi.org/10.1016/j.precisioneng.2003.07.004 schema:sameAs https://app.dimensions.ai/details/publication/pub.1009245104
    102 rdf:type schema:CreativeWork
    103 https://doi.org/10.1016/s0007-8506(07)60081-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1023490590
    104 rdf:type schema:CreativeWork
    105 https://doi.org/10.1016/s0007-8506(07)62809-1 schema:sameAs https://app.dimensions.ai/details/publication/pub.1017195683
    106 rdf:type schema:CreativeWork
    107 https://doi.org/10.1016/s0013-4686(97)00147-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1019776820
    108 rdf:type schema:CreativeWork
    109 https://doi.org/10.1016/s0736-5845(02)00019-4 schema:sameAs https://app.dimensions.ai/details/publication/pub.1008574931
    110 rdf:type schema:CreativeWork
    111 https://doi.org/10.1016/s0924-0136(03)00722-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1005000756
    112 rdf:type schema:CreativeWork
    113 https://doi.org/10.1016/s1000-9361(09)60257-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1037746595
    114 rdf:type schema:CreativeWork
    115 https://doi.org/10.1080/10910344.2015.1018533 schema:sameAs https://app.dimensions.ai/details/publication/pub.1030747601
    116 rdf:type schema:CreativeWork
    117 https://doi.org/10.1115/1.2826853 schema:sameAs https://app.dimensions.ai/details/publication/pub.1062086119
    118 rdf:type schema:CreativeWork
    119 https://doi.org/10.1142/s0219686714500012 schema:sameAs https://app.dimensions.ai/details/publication/pub.1063003702
    120 rdf:type schema:CreativeWork
    121 https://doi.org/10.1149/1.2097055 schema:sameAs https://app.dimensions.ai/details/publication/pub.1042963097
    122 rdf:type schema:CreativeWork
    123 https://www.grid.ac/institutes/grid.417965.8 schema:alternateName Indian Institute of Technology Kanpur
    124 schema:name Department of Mechanical Engineering, Indian Institute of Technology Kanpur, 208016, Kanpur, India
    125 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...