Research on surface integrity of grinding Inconel718 View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

2013-03

AUTHORS

C. F. Yao, Q. C. Jin, X. C. Huang, D. X. Wu, J. X. Ren, D. H. Zhang

ABSTRACT

Inconel718 is widely used in the aerospace industry; the finished surface quality has significant effect on service performance of component. The surface integrity in grinding Inconel718 respectively by using a vitrified bond single alumina (SA) wheel and a resin cubic boron nitride (CBN) wheel were investigated. First, effects of different grinding parameters on grinding temperature and grinding force and grinding chips feature by using a SA and a CBN wheel respectively were investigated. Then, the surface roughness and topography by using a SA and a CBN wheel through single factor experiment were compared, and in the grinding parameters range of the present study, the better surface can be obtained by a SA wheel. Finally, surface integrity by using a SA wheel and the different grinding depth was studied and analyzed by the grinding temperature and the grinding force. It was possible to conclude that better surface can be achieved by using a SA, and taking ap = 0.005 mm, vw = 16 m/min, vs = 25 m/s for grinding Inconel718. In this grinding case, the surface roughness was Ra0.112 μm, the surface residual stress was +700Mpa, and the surface hardness was 440 HV; the depth of residual stress layer was 40∼60 μm, the depth of softened layer was 30∼40 μm and the depth of plastic deformation layer was 10∼15 μm. More... »

PAGES

1019-1030

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/s00170-012-4236-7

DOI

http://dx.doi.org/10.1007/s00170-012-4236-7

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1036334586


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Materials Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "Ministry of Education of the People's Republic of China", 
          "id": "https://www.grid.ac/institutes/grid.419897.a", 
          "name": [
            "The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Ministry of Education, Northwestern Polytechnical University, Box 552, 710072, Xi\u2019an, Shaanxi, People\u2019s Republic of China"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Yao", 
        "givenName": "C. F.", 
        "id": "sg:person.014520142663.01", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014520142663.01"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Ministry of Education of the People's Republic of China", 
          "id": "https://www.grid.ac/institutes/grid.419897.a", 
          "name": [
            "The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Ministry of Education, Northwestern Polytechnical University, Box 552, 710072, Xi\u2019an, Shaanxi, People\u2019s Republic of China"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Jin", 
        "givenName": "Q. C.", 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Ministry of Education of the People's Republic of China", 
          "id": "https://www.grid.ac/institutes/grid.419897.a", 
          "name": [
            "The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Ministry of Education, Northwestern Polytechnical University, Box 552, 710072, Xi\u2019an, Shaanxi, People\u2019s Republic of China"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Huang", 
        "givenName": "X. C.", 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Ministry of Education of the People's Republic of China", 
          "id": "https://www.grid.ac/institutes/grid.419897.a", 
          "name": [
            "The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Ministry of Education, Northwestern Polytechnical University, Box 552, 710072, Xi\u2019an, Shaanxi, People\u2019s Republic of China"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Wu", 
        "givenName": "D. X.", 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Ministry of Education of the People's Republic of China", 
          "id": "https://www.grid.ac/institutes/grid.419897.a", 
          "name": [
            "The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Ministry of Education, Northwestern Polytechnical University, Box 552, 710072, Xi\u2019an, Shaanxi, People\u2019s Republic of China"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Ren", 
        "givenName": "J. X.", 
        "id": "sg:person.014511465215.94", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014511465215.94"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Ministry of Education of the People's Republic of China", 
          "id": "https://www.grid.ac/institutes/grid.419897.a", 
          "name": [
            "The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Ministry of Education, Northwestern Polytechnical University, Box 552, 710072, Xi\u2019an, Shaanxi, People\u2019s Republic of China"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Zhang", 
        "givenName": "D. H.", 
        "id": "sg:person.012626615407.87", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012626615407.87"
        ], 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "https://doi.org/10.1016/s1000-9361(09)60247-8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1003547879"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0924-0136(02)00282-0", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1004387143"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0924-0136(01)01024-x", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1004542436"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.cirp.2007.05.079", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1005489454"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1080/10910340903454922", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1012069623"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.jmatprotec.2007.11.176", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1021833670"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.cirp.2008.03.076", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1033099259"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.jmatprotec.2011.04.011", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1033711163"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0924-0136(98)00314-8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1036890471"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0924-0136(96)02624-6", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1041745520"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0890-6955(03)00159-7", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1041968591"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.ijmachtools.2004.05.005", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1042797632"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/j.ijmachtools.2007.08.004", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1043863283"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0141-6359(01)00078-2", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1047555509"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0043-1648(03)00163-7", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1048913377"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0043-1648(03)00163-7", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1048913377"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/s0924-0136(02)00656-8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1053692356"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1243/09544054jem936", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1064449103"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1243/09544054jem936", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1064449103"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "2013-03", 
    "datePublishedReg": "2013-03-01", 
    "description": "Inconel718 is widely used in the aerospace industry; the finished surface quality has significant effect on service performance of component. The surface integrity in grinding Inconel718 respectively by using a vitrified bond single alumina (SA) wheel and a resin cubic boron nitride (CBN) wheel were investigated. First, effects of different grinding parameters on grinding temperature and grinding force and grinding chips feature by using a SA and a CBN wheel respectively were investigated. Then, the surface roughness and topography by using a SA and a CBN wheel through single factor experiment were compared, and in the grinding parameters range of the present study, the better surface can be obtained by a SA wheel. Finally, surface integrity by using a SA wheel and the different grinding depth was studied and analyzed by the grinding temperature and the grinding force. It was possible to conclude that better surface can be achieved by using a SA, and taking ap = 0.005 mm, vw = 16 m/min, vs = 25 m/s for grinding Inconel718. In this grinding case, the surface roughness was Ra0.112 \u03bcm, the surface residual stress was +700Mpa, and the surface hardness was 440 HV; the depth of residual stress layer was 40\u223c60 \u03bcm, the depth of softened layer was 30\u223c40 \u03bcm and the depth of plastic deformation layer was 10\u223c15 \u03bcm.", 
    "genre": "research_article", 
    "id": "sg:pub.10.1007/s00170-012-4236-7", 
    "inLanguage": [
      "en"
    ], 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1043671", 
        "issn": [
          "0268-3768", 
          "1433-3015"
        ], 
        "name": "The International Journal of Advanced Manufacturing Technology", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "5-8", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "65"
      }
    ], 
    "name": "Research on surface integrity of grinding Inconel718", 
    "pagination": "1019-1030", 
    "productId": [
      {
        "name": "readcube_id", 
        "type": "PropertyValue", 
        "value": [
          "ad157f19e42a9fd0eb54cd98893a76a1623f1fccde540bc424129a0f686d1f70"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/s00170-012-4236-7"
        ]
      }, 
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1036334586"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/s00170-012-4236-7", 
      "https://app.dimensions.ai/details/publication/pub.1036334586"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2019-04-10T22:32", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8690_00000514.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "http://link.springer.com/10.1007%2Fs00170-012-4236-7"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s00170-012-4236-7'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s00170-012-4236-7'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s00170-012-4236-7'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s00170-012-4236-7'


 

This table displays all metadata directly associated to this object as RDF triples.

144 TRIPLES      21 PREDICATES      44 URIs      19 LITERALS      7 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/s00170-012-4236-7 schema:about anzsrc-for:09
2 anzsrc-for:0912
3 schema:author Nb22450dfb030486a87e3f073b688a5ff
4 schema:citation https://doi.org/10.1016/j.cirp.2007.05.079
5 https://doi.org/10.1016/j.cirp.2008.03.076
6 https://doi.org/10.1016/j.ijmachtools.2004.05.005
7 https://doi.org/10.1016/j.ijmachtools.2007.08.004
8 https://doi.org/10.1016/j.jmatprotec.2007.11.176
9 https://doi.org/10.1016/j.jmatprotec.2011.04.011
10 https://doi.org/10.1016/s0043-1648(03)00163-7
11 https://doi.org/10.1016/s0141-6359(01)00078-2
12 https://doi.org/10.1016/s0890-6955(03)00159-7
13 https://doi.org/10.1016/s0924-0136(01)01024-x
14 https://doi.org/10.1016/s0924-0136(02)00282-0
15 https://doi.org/10.1016/s0924-0136(02)00656-8
16 https://doi.org/10.1016/s0924-0136(96)02624-6
17 https://doi.org/10.1016/s0924-0136(98)00314-8
18 https://doi.org/10.1016/s1000-9361(09)60247-8
19 https://doi.org/10.1080/10910340903454922
20 https://doi.org/10.1243/09544054jem936
21 schema:datePublished 2013-03
22 schema:datePublishedReg 2013-03-01
23 schema:description Inconel718 is widely used in the aerospace industry; the finished surface quality has significant effect on service performance of component. The surface integrity in grinding Inconel718 respectively by using a vitrified bond single alumina (SA) wheel and a resin cubic boron nitride (CBN) wheel were investigated. First, effects of different grinding parameters on grinding temperature and grinding force and grinding chips feature by using a SA and a CBN wheel respectively were investigated. Then, the surface roughness and topography by using a SA and a CBN wheel through single factor experiment were compared, and in the grinding parameters range of the present study, the better surface can be obtained by a SA wheel. Finally, surface integrity by using a SA wheel and the different grinding depth was studied and analyzed by the grinding temperature and the grinding force. It was possible to conclude that better surface can be achieved by using a SA, and taking ap = 0.005 mm, vw = 16 m/min, vs = 25 m/s for grinding Inconel718. In this grinding case, the surface roughness was Ra0.112 μm, the surface residual stress was +700Mpa, and the surface hardness was 440 HV; the depth of residual stress layer was 40∼60 μm, the depth of softened layer was 30∼40 μm and the depth of plastic deformation layer was 10∼15 μm.
24 schema:genre research_article
25 schema:inLanguage en
26 schema:isAccessibleForFree false
27 schema:isPartOf N5f0b0a5e33e94757b4713959a83a7a3d
28 Nd2f4339321b64646b1f3480e3d985e85
29 sg:journal.1043671
30 schema:name Research on surface integrity of grinding Inconel718
31 schema:pagination 1019-1030
32 schema:productId N6e1fa4071c3343bcad70b33025bcd4d6
33 N8d66aa53e899419b930ce08930eb56d0
34 Nc4245ef528984f8082dfb7475fbd1a1a
35 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036334586
36 https://doi.org/10.1007/s00170-012-4236-7
37 schema:sdDatePublished 2019-04-10T22:32
38 schema:sdLicense https://scigraph.springernature.com/explorer/license/
39 schema:sdPublisher Ne55cd3b5a4394ae3a7a23a6db1f9a1bf
40 schema:url http://link.springer.com/10.1007%2Fs00170-012-4236-7
41 sgo:license sg:explorer/license/
42 sgo:sdDataset articles
43 rdf:type schema:ScholarlyArticle
44 N0b15ff70c5a24b5580eec21cfac2ed57 rdf:first Ncfe574df4be84800ae3fbccb32159b7e
45 rdf:rest Nce6d06c307ae45699b95bd4518c3321c
46 N1b8e81e9bcaa4aeb99d4257d1a94f6a3 rdf:first sg:person.012626615407.87
47 rdf:rest rdf:nil
48 N2d8232e82ff648609d06c828a70f819d rdf:first Nd9caa484a2784088a783a9ed4da046fc
49 rdf:rest N0b15ff70c5a24b5580eec21cfac2ed57
50 N332d91b0e0114ee992a22ca9404cea7e schema:affiliation https://www.grid.ac/institutes/grid.419897.a
51 schema:familyName Wu
52 schema:givenName D. X.
53 rdf:type schema:Person
54 N5f0b0a5e33e94757b4713959a83a7a3d schema:issueNumber 5-8
55 rdf:type schema:PublicationIssue
56 N6e1fa4071c3343bcad70b33025bcd4d6 schema:name readcube_id
57 schema:value ad157f19e42a9fd0eb54cd98893a76a1623f1fccde540bc424129a0f686d1f70
58 rdf:type schema:PropertyValue
59 N8d66aa53e899419b930ce08930eb56d0 schema:name dimensions_id
60 schema:value pub.1036334586
61 rdf:type schema:PropertyValue
62 Nb22450dfb030486a87e3f073b688a5ff rdf:first sg:person.014520142663.01
63 rdf:rest N2d8232e82ff648609d06c828a70f819d
64 Nc4245ef528984f8082dfb7475fbd1a1a schema:name doi
65 schema:value 10.1007/s00170-012-4236-7
66 rdf:type schema:PropertyValue
67 Nce6d06c307ae45699b95bd4518c3321c rdf:first N332d91b0e0114ee992a22ca9404cea7e
68 rdf:rest Ne92e994624b44d98ac0309f5534c9f11
69 Ncfe574df4be84800ae3fbccb32159b7e schema:affiliation https://www.grid.ac/institutes/grid.419897.a
70 schema:familyName Huang
71 schema:givenName X. C.
72 rdf:type schema:Person
73 Nd2f4339321b64646b1f3480e3d985e85 schema:volumeNumber 65
74 rdf:type schema:PublicationVolume
75 Nd9caa484a2784088a783a9ed4da046fc schema:affiliation https://www.grid.ac/institutes/grid.419897.a
76 schema:familyName Jin
77 schema:givenName Q. C.
78 rdf:type schema:Person
79 Ne55cd3b5a4394ae3a7a23a6db1f9a1bf schema:name Springer Nature - SN SciGraph project
80 rdf:type schema:Organization
81 Ne92e994624b44d98ac0309f5534c9f11 rdf:first sg:person.014511465215.94
82 rdf:rest N1b8e81e9bcaa4aeb99d4257d1a94f6a3
83 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
84 schema:name Engineering
85 rdf:type schema:DefinedTerm
86 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
87 schema:name Materials Engineering
88 rdf:type schema:DefinedTerm
89 sg:journal.1043671 schema:issn 0268-3768
90 1433-3015
91 schema:name The International Journal of Advanced Manufacturing Technology
92 rdf:type schema:Periodical
93 sg:person.012626615407.87 schema:affiliation https://www.grid.ac/institutes/grid.419897.a
94 schema:familyName Zhang
95 schema:givenName D. H.
96 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012626615407.87
97 rdf:type schema:Person
98 sg:person.014511465215.94 schema:affiliation https://www.grid.ac/institutes/grid.419897.a
99 schema:familyName Ren
100 schema:givenName J. X.
101 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014511465215.94
102 rdf:type schema:Person
103 sg:person.014520142663.01 schema:affiliation https://www.grid.ac/institutes/grid.419897.a
104 schema:familyName Yao
105 schema:givenName C. F.
106 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014520142663.01
107 rdf:type schema:Person
108 https://doi.org/10.1016/j.cirp.2007.05.079 schema:sameAs https://app.dimensions.ai/details/publication/pub.1005489454
109 rdf:type schema:CreativeWork
110 https://doi.org/10.1016/j.cirp.2008.03.076 schema:sameAs https://app.dimensions.ai/details/publication/pub.1033099259
111 rdf:type schema:CreativeWork
112 https://doi.org/10.1016/j.ijmachtools.2004.05.005 schema:sameAs https://app.dimensions.ai/details/publication/pub.1042797632
113 rdf:type schema:CreativeWork
114 https://doi.org/10.1016/j.ijmachtools.2007.08.004 schema:sameAs https://app.dimensions.ai/details/publication/pub.1043863283
115 rdf:type schema:CreativeWork
116 https://doi.org/10.1016/j.jmatprotec.2007.11.176 schema:sameAs https://app.dimensions.ai/details/publication/pub.1021833670
117 rdf:type schema:CreativeWork
118 https://doi.org/10.1016/j.jmatprotec.2011.04.011 schema:sameAs https://app.dimensions.ai/details/publication/pub.1033711163
119 rdf:type schema:CreativeWork
120 https://doi.org/10.1016/s0043-1648(03)00163-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1048913377
121 rdf:type schema:CreativeWork
122 https://doi.org/10.1016/s0141-6359(01)00078-2 schema:sameAs https://app.dimensions.ai/details/publication/pub.1047555509
123 rdf:type schema:CreativeWork
124 https://doi.org/10.1016/s0890-6955(03)00159-7 schema:sameAs https://app.dimensions.ai/details/publication/pub.1041968591
125 rdf:type schema:CreativeWork
126 https://doi.org/10.1016/s0924-0136(01)01024-x schema:sameAs https://app.dimensions.ai/details/publication/pub.1004542436
127 rdf:type schema:CreativeWork
128 https://doi.org/10.1016/s0924-0136(02)00282-0 schema:sameAs https://app.dimensions.ai/details/publication/pub.1004387143
129 rdf:type schema:CreativeWork
130 https://doi.org/10.1016/s0924-0136(02)00656-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1053692356
131 rdf:type schema:CreativeWork
132 https://doi.org/10.1016/s0924-0136(96)02624-6 schema:sameAs https://app.dimensions.ai/details/publication/pub.1041745520
133 rdf:type schema:CreativeWork
134 https://doi.org/10.1016/s0924-0136(98)00314-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036890471
135 rdf:type schema:CreativeWork
136 https://doi.org/10.1016/s1000-9361(09)60247-8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1003547879
137 rdf:type schema:CreativeWork
138 https://doi.org/10.1080/10910340903454922 schema:sameAs https://app.dimensions.ai/details/publication/pub.1012069623
139 rdf:type schema:CreativeWork
140 https://doi.org/10.1243/09544054jem936 schema:sameAs https://app.dimensions.ai/details/publication/pub.1064449103
141 rdf:type schema:CreativeWork
142 https://www.grid.ac/institutes/grid.419897.a schema:alternateName Ministry of Education of the People's Republic of China
143 schema:name The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Ministry of Education, Northwestern Polytechnical University, Box 552, 710072, Xi’an, Shaanxi, People’s Republic of China
144 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...