Ontology type: schema:ScholarlyArticle
2019-04
AUTHORSSaeid Samiezadeh, Habiba Bougherara, Mansour Abolghasemian, Darryl D’Lima, David Backstein
ABSTRACTPURPOSE: To compare the stresses at bone-arthroplasty interface of constrained and semi-constrained knee prostheses, using the finite element (FE) method as a predictor of the survivorship of the implants. METHODS: Three-dimensional FE models of the knee implanted with rotating hinge (RHK) and legacy constrained condylar (LCCK) prostheses were generated to study the loads and stresses for two situations: medial- and lateral collateral ligament deficiencies in full extension. RESULTS: On average, the shear stress developed at bone-implant interface dropped from 16.9 to 13.7 MPa (18.9%), and the interface von Mises stress lowered from 37.6 to 30.2 MPa (19.6%) in RHK compared to those in LCCK prostheses. RHK design also resulted in a more uniform stress distribution at the interfaces in both femur and tibia. The average polyethylene liner stress dropped from 9.6 to 2.6 MPa (a 72.7% decrease) in RHK design when compared to that in LCCK design. CONCLUSION: The more uniform interface stress suggests fewer density changes at the periprosthetic regions due to bone remodelling. Moreover, the lower polyethylene stresses are likely to reduce wear and damage. These findings reveal that the RHK design may have more favorable mechanical features compared to LCCK design in full extension boundary conditions, implying a potentially better survivorship. However, the findings should be interpreted cautiously as other configurations were not investigated. More... »
PAGES1224-1231
http://scigraph.springernature.com/pub.10.1007/s00167-018-5054-8
DOIhttp://dx.doi.org/10.1007/s00167-018-5054-8
DIMENSIONShttps://app.dimensions.ai/details/publication/pub.1105779759
PUBMEDhttps://www.ncbi.nlm.nih.gov/pubmed/30039293
JSON-LD is the canonical representation for SciGraph data.
TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT
[
{
"@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json",
"about": [
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/1103",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Clinical Sciences",
"type": "DefinedTerm"
},
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/11",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Medical and Health Sciences",
"type": "DefinedTerm"
}
],
"author": [
{
"affiliation": {
"alternateName": "University of Toronto",
"id": "https://www.grid.ac/institutes/grid.17063.33",
"name": [
"Orthopaedic Biomechanics Laboratory, Sunnybrook Research Institute, 2075 Bayview Avenue, M4N 3M5, Toronto, ON, Canada"
],
"type": "Organization"
},
"familyName": "Samiezadeh",
"givenName": "Saeid",
"id": "sg:person.01134606476.82",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01134606476.82"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "Ryerson University",
"id": "https://www.grid.ac/institutes/grid.68312.3e",
"name": [
"Department of Mechanical and Industrial Engineering, Ryerson University, 350 Victoria Street, M5B 2K3, Toronto, ON, Canada"
],
"type": "Organization"
},
"familyName": "Bougherara",
"givenName": "Habiba",
"id": "sg:person.01215173221.45",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01215173221.45"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "Iran University of Medical Sciences",
"id": "https://www.grid.ac/institutes/grid.411746.1",
"name": [
"Bone and Joint Reconstruction Research Center, Shafa Hospital, Iran University of Medical Sciences, Jaleh Street, Baharestan Square, Tehran, Iran"
],
"type": "Organization"
},
"familyName": "Abolghasemian",
"givenName": "Mansour",
"id": "sg:person.01120174405.33",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01120174405.33"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "Scripps Clinic Medical Group",
"id": "https://www.grid.ac/institutes/grid.415401.5",
"name": [
"Orthopaedic Research Laboratories, Shiley Center for Orthopaedic Research and Education at Scripps Clinic, 11025 N Torrey Pines Rd, 92037, La Jolla, CA, USA"
],
"type": "Organization"
},
"familyName": "D\u2019Lima",
"givenName": "Darryl",
"id": "sg:person.0616637727.25",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.0616637727.25"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "University of Toronto",
"id": "https://www.grid.ac/institutes/grid.17063.33",
"name": [
"Head of Gluskin Granovsky, Division of Orthopedic Surgery, Mount Sinai Hospital, University of Toronto, 600 University Avenue, M5G 1X5, Toronto, ON, Canada"
],
"type": "Organization"
},
"familyName": "Backstein",
"givenName": "David",
"id": "sg:person.0624072661.40",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.0624072661.40"
],
"type": "Person"
}
],
"citation": [
{
"id": "https://doi.org/10.1016/j.arth.2013.12.013",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1002091776"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jmbbm.2013.02.006",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1002830861"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s1350-4533(97)00049-0",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1003785541"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jbiomech.2008.08.013",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1007868125"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/s00167-012-2305-y",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1010528407",
"https://doi.org/10.1007/s00167-012-2305-y"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0968-0160(01)00121-1",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1016524616"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.arth.2012.05.008",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1018854389"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.arth.2005.03.008",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1022647811"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.arth.2013.04.042",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1037315212"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jbiomech.2007.03.004",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1040754097"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/s0268-0033(97)00072-7",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1040755450"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.medengphy.2009.10.002",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1045208720"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1302/0301-620x.86b6.14708",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1045645741"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.arth.2013.10.025",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1048946724"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jbiomech.2005.04.030",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1051536403"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.jbiomech.2005.04.030",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1051536403"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1097/00003086-200111000-00039",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1060168974"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1097/00003086-200111000-00039",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1060168974"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1097/00003086-200111000-00039",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1060168974"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1243/09544119jeim501",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1064455094"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1243/09544119jeim501",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1064455094"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1243/09544119jeim702",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1064455229"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1243/09544119jeim702",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1064455229"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1302/0301-620x.80b2.7905",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1064885854"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.3928/01477447-20120222-34",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1071721231"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.3928/01477447-20151228-07",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1071722628"
],
"type": "CreativeWork"
},
{
"id": "https://app.dimensions.ai/details/publication/pub.1076832372",
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1302/0301-620x.73b5.1894661",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1077799873"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/j.arth.2017.10.009",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1092232815"
],
"type": "CreativeWork"
}
],
"datePublished": "2019-04",
"datePublishedReg": "2019-04-01",
"description": "PURPOSE: To compare the stresses at bone-arthroplasty interface of constrained and semi-constrained knee prostheses, using the finite element (FE) method as a predictor of the survivorship of the implants.\nMETHODS: Three-dimensional FE models of the knee implanted with rotating hinge (RHK) and legacy constrained condylar (LCCK) prostheses were generated to study the loads and stresses for two situations: medial- and lateral collateral ligament deficiencies in full extension.\nRESULTS: On average, the shear stress developed at bone-implant interface dropped from 16.9 to 13.7\u00a0MPa (18.9%), and the interface von Mises stress lowered from 37.6 to 30.2\u00a0MPa (19.6%) in RHK compared to those in LCCK prostheses. RHK design also resulted in a more uniform stress distribution at the interfaces in both femur and tibia. The average polyethylene liner stress dropped from 9.6 to 2.6\u00a0MPa (a 72.7% decrease) in RHK design when compared to that in LCCK design.\nCONCLUSION: The more uniform interface stress suggests fewer density changes at the periprosthetic regions due to bone remodelling. Moreover, the lower polyethylene stresses are likely to reduce wear and damage. These findings reveal that the RHK design may have more favorable mechanical features compared to LCCK design in full extension boundary conditions, implying a potentially better survivorship. However, the findings should be interpreted cautiously as other configurations were not investigated.",
"genre": "research_article",
"id": "sg:pub.10.1007/s00167-018-5054-8",
"inLanguage": [
"en"
],
"isAccessibleForFree": false,
"isPartOf": [
{
"id": "sg:journal.1104512",
"issn": [
"0942-2056",
"1433-7347"
],
"name": "Knee Surgery, Sports Traumatology, Arthroscopy",
"type": "Periodical"
},
{
"issueNumber": "4",
"type": "PublicationIssue"
},
{
"type": "PublicationVolume",
"volumeNumber": "27"
}
],
"name": "Rotating hinge knee causes lower bone\u2013implant interface stress compared to constrained condylar knee replacement",
"pagination": "1224-1231",
"productId": [
{
"name": "readcube_id",
"type": "PropertyValue",
"value": [
"fa735a5c750c37fba93008077a22445d756b97549ad1145cc4af82250d59659c"
]
},
{
"name": "pubmed_id",
"type": "PropertyValue",
"value": [
"30039293"
]
},
{
"name": "nlm_unique_id",
"type": "PropertyValue",
"value": [
"9314730"
]
},
{
"name": "doi",
"type": "PropertyValue",
"value": [
"10.1007/s00167-018-5054-8"
]
},
{
"name": "dimensions_id",
"type": "PropertyValue",
"value": [
"pub.1105779759"
]
}
],
"sameAs": [
"https://doi.org/10.1007/s00167-018-5054-8",
"https://app.dimensions.ai/details/publication/pub.1105779759"
],
"sdDataset": "articles",
"sdDatePublished": "2019-04-11T13:20",
"sdLicense": "https://scigraph.springernature.com/explorer/license/",
"sdPublisher": {
"name": "Springer Nature - SN SciGraph project",
"type": "Organization"
},
"sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000368_0000000368/records_78968_00000000.jsonl",
"type": "ScholarlyArticle",
"url": "https://link.springer.com/10.1007%2Fs00167-018-5054-8"
}
]Download the RDF metadata as: json-ld nt turtle xml License info
JSON-LD is a popular format for linked data which is fully compatible with JSON.
curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/s00167-018-5054-8'
N-Triples is a line-based linked data format ideal for batch operations.
curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/s00167-018-5054-8'
Turtle is a human-readable linked data format.
curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/s00167-018-5054-8'
RDF/XML is a standard XML format for linked data.
curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/s00167-018-5054-8'
This table displays all metadata directly associated to this object as RDF triples.
179 TRIPLES
21 PREDICATES
53 URIs
21 LITERALS
9 BLANK NODES