Effect of solution treatment parameters on tensile properties of cast aluminum alloys View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

1990-03

AUTHORS

S. Shivkumar, S. Ricci, C. Keller, D. Apelian

ABSTRACT

The influence of solution heat treatment parameters on T6 properties of unmodified and Sr-modified A356.2 alloys has been studied. The effects of solution temperature and time were investigated with ASTM B 108 test bars cast in sand molds and in permanent molds. Metallographic and image analysis techniques have been utilized to examine the microstructural changes occurring during heat treatment. The results indicate that the effect of Sr modification is to increase the spheroidization rate and lower the coarsening rate of Si particles. The solution temperature has a strong influence on Si particle morphology. Extremely high coarsening rates can be obtained at temperatures greater than 560° C. Solution treatment at these temperatures, however, has a detrimental effect on mechanical properties because of grain boundary melting. It has been established that solution times can be reduced significantly in modified samples. Increasing the solution temperature from 540 to 550°C enhances the strength properties. More... »

PAGES

63-70

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/bf02833067

DOI

http://dx.doi.org/10.1007/bf02833067

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1021474294


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Materials Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "Drexel University", 
          "id": "https://www.grid.ac/institutes/grid.166341.7", 
          "name": [
            "Aluminum Casting Research Laboratory, Department of Materials Engineering, Drexel University, 19104, Philadelphia, PA"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Shivkumar", 
        "givenName": "S.", 
        "id": "sg:person.016005226011.33", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016005226011.33"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Drexel University", 
          "id": "https://www.grid.ac/institutes/grid.166341.7", 
          "name": [
            "Aluminum Casting Research Laboratory, Department of Materials Engineering, Drexel University, 19104, Philadelphia, PA"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Ricci", 
        "givenName": "S.", 
        "id": "sg:person.016261051713.73", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016261051713.73"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Drexel University", 
          "id": "https://www.grid.ac/institutes/grid.166341.7", 
          "name": [
            "Aluminum Casting Research Laboratory, Department of Materials Engineering, Drexel University, 19104, Philadelphia, PA"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Keller", 
        "givenName": "C.", 
        "id": "sg:person.011150741513.37", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011150741513.37"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Drexel University", 
          "id": "https://www.grid.ac/institutes/grid.166341.7", 
          "name": [
            "Aluminum Casting Research Laboratory, Department of Materials Engineering, Drexel University, 19104, Philadelphia, PA"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Apelian", 
        "givenName": "D.", 
        "id": "sg:person.014007561701.24", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014007561701.24"
        ], 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "https://doi.org/10.1016/0022-3697(61)90054-3", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1000441444"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1016/0022-3697(61)90054-3", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1000441444"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.2464/jilm.28.8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1012045132"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.2464/jilm.28.8", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1012045132"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf00752206", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1017193154", 
          "https://doi.org/10.1007/bf00752206"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf00752206", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1017193154", 
          "https://doi.org/10.1007/bf00752206"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf00752206", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1017193154", 
          "https://doi.org/10.1007/bf00752206"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02668542", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1026915047", 
          "https://doi.org/10.1007/bf02668542"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02645912", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1029979701", 
          "https://doi.org/10.1007/bf02645912"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02645912", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1029979701", 
          "https://doi.org/10.1007/bf02645912"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "https://doi.org/10.1080/09534962.1988.11818973", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1030511320"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "1990-03", 
    "datePublishedReg": "1990-03-01", 
    "description": "The influence of solution heat treatment parameters on T6 properties of unmodified and Sr-modified A356.2 alloys has been studied. The effects of solution temperature and time were investigated with ASTM B 108 test bars cast in sand molds and in permanent molds. Metallographic and image analysis techniques have been utilized to examine the microstructural changes occurring during heat treatment. The results indicate that the effect of Sr modification is to increase the spheroidization rate and lower the coarsening rate of Si particles. The solution temperature has a strong influence on Si particle morphology. Extremely high coarsening rates can be obtained at temperatures greater than 560\u00b0 C. Solution treatment at these temperatures, however, has a detrimental effect on mechanical properties because of grain boundary melting. It has been established that solution times can be reduced significantly in modified samples. Increasing the solution temperature from 540 to 550\u00b0C enhances the strength properties.", 
    "genre": "research_article", 
    "id": "sg:pub.10.1007/bf02833067", 
    "inLanguage": [
      "en"
    ], 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1143919", 
        "issn": [
          "0190-9177"
        ], 
        "name": "Journal of Heat Treating", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "1", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "8"
      }
    ], 
    "name": "Effect of solution treatment parameters on tensile properties of cast aluminum alloys", 
    "pagination": "63-70", 
    "productId": [
      {
        "name": "readcube_id", 
        "type": "PropertyValue", 
        "value": [
          "66506e33b21b7c798a816e590f2047b74de64dfdeaa6acef95481ed75816a775"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/bf02833067"
        ]
      }, 
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1021474294"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/bf02833067", 
      "https://app.dimensions.ai/details/publication/pub.1021474294"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2019-04-11T13:33", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000370_0000000370/records_46766_00000001.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "http://link.springer.com/10.1007%2FBF02833067"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/bf02833067'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/bf02833067'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/bf02833067'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/bf02833067'


 

This table displays all metadata directly associated to this object as RDF triples.

102 TRIPLES      21 PREDICATES      33 URIs      19 LITERALS      7 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/bf02833067 schema:about anzsrc-for:09
2 anzsrc-for:0912
3 schema:author Ne150687d0e4d4f429d500853407ebe22
4 schema:citation sg:pub.10.1007/bf00752206
5 sg:pub.10.1007/bf02645912
6 sg:pub.10.1007/bf02668542
7 https://doi.org/10.1016/0022-3697(61)90054-3
8 https://doi.org/10.1080/09534962.1988.11818973
9 https://doi.org/10.2464/jilm.28.8
10 schema:datePublished 1990-03
11 schema:datePublishedReg 1990-03-01
12 schema:description The influence of solution heat treatment parameters on T6 properties of unmodified and Sr-modified A356.2 alloys has been studied. The effects of solution temperature and time were investigated with ASTM B 108 test bars cast in sand molds and in permanent molds. Metallographic and image analysis techniques have been utilized to examine the microstructural changes occurring during heat treatment. The results indicate that the effect of Sr modification is to increase the spheroidization rate and lower the coarsening rate of Si particles. The solution temperature has a strong influence on Si particle morphology. Extremely high coarsening rates can be obtained at temperatures greater than 560° C. Solution treatment at these temperatures, however, has a detrimental effect on mechanical properties because of grain boundary melting. It has been established that solution times can be reduced significantly in modified samples. Increasing the solution temperature from 540 to 550°C enhances the strength properties.
13 schema:genre research_article
14 schema:inLanguage en
15 schema:isAccessibleForFree false
16 schema:isPartOf Ne642e0143c0642728938648ddb0dd729
17 Nea876a6b531446e0909c23790ed4cb72
18 sg:journal.1143919
19 schema:name Effect of solution treatment parameters on tensile properties of cast aluminum alloys
20 schema:pagination 63-70
21 schema:productId N565a8cacff994813918152423ec9d6e2
22 N71b5a1ef8d074278a8274688d47ec2ef
23 Ne06c47a1df794f948e2f49b8bf182fc1
24 schema:sameAs https://app.dimensions.ai/details/publication/pub.1021474294
25 https://doi.org/10.1007/bf02833067
26 schema:sdDatePublished 2019-04-11T13:33
27 schema:sdLicense https://scigraph.springernature.com/explorer/license/
28 schema:sdPublisher Nc14e3ee2586f4a47a717181d891bcefe
29 schema:url http://link.springer.com/10.1007%2FBF02833067
30 sgo:license sg:explorer/license/
31 sgo:sdDataset articles
32 rdf:type schema:ScholarlyArticle
33 N4ab8c460d29f4cfabe67b0e49bb9f13d rdf:first sg:person.014007561701.24
34 rdf:rest rdf:nil
35 N51c5c4c1369f4a6ba8f24ee46fa76740 rdf:first sg:person.016261051713.73
36 rdf:rest N886d28fec27044a2b4eea1d146029bf5
37 N565a8cacff994813918152423ec9d6e2 schema:name dimensions_id
38 schema:value pub.1021474294
39 rdf:type schema:PropertyValue
40 N71b5a1ef8d074278a8274688d47ec2ef schema:name readcube_id
41 schema:value 66506e33b21b7c798a816e590f2047b74de64dfdeaa6acef95481ed75816a775
42 rdf:type schema:PropertyValue
43 N886d28fec27044a2b4eea1d146029bf5 rdf:first sg:person.011150741513.37
44 rdf:rest N4ab8c460d29f4cfabe67b0e49bb9f13d
45 Nc14e3ee2586f4a47a717181d891bcefe schema:name Springer Nature - SN SciGraph project
46 rdf:type schema:Organization
47 Ne06c47a1df794f948e2f49b8bf182fc1 schema:name doi
48 schema:value 10.1007/bf02833067
49 rdf:type schema:PropertyValue
50 Ne150687d0e4d4f429d500853407ebe22 rdf:first sg:person.016005226011.33
51 rdf:rest N51c5c4c1369f4a6ba8f24ee46fa76740
52 Ne642e0143c0642728938648ddb0dd729 schema:issueNumber 1
53 rdf:type schema:PublicationIssue
54 Nea876a6b531446e0909c23790ed4cb72 schema:volumeNumber 8
55 rdf:type schema:PublicationVolume
56 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
57 schema:name Engineering
58 rdf:type schema:DefinedTerm
59 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
60 schema:name Materials Engineering
61 rdf:type schema:DefinedTerm
62 sg:journal.1143919 schema:issn 0190-9177
63 schema:name Journal of Heat Treating
64 rdf:type schema:Periodical
65 sg:person.011150741513.37 schema:affiliation https://www.grid.ac/institutes/grid.166341.7
66 schema:familyName Keller
67 schema:givenName C.
68 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011150741513.37
69 rdf:type schema:Person
70 sg:person.014007561701.24 schema:affiliation https://www.grid.ac/institutes/grid.166341.7
71 schema:familyName Apelian
72 schema:givenName D.
73 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014007561701.24
74 rdf:type schema:Person
75 sg:person.016005226011.33 schema:affiliation https://www.grid.ac/institutes/grid.166341.7
76 schema:familyName Shivkumar
77 schema:givenName S.
78 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016005226011.33
79 rdf:type schema:Person
80 sg:person.016261051713.73 schema:affiliation https://www.grid.ac/institutes/grid.166341.7
81 schema:familyName Ricci
82 schema:givenName S.
83 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016261051713.73
84 rdf:type schema:Person
85 sg:pub.10.1007/bf00752206 schema:sameAs https://app.dimensions.ai/details/publication/pub.1017193154
86 https://doi.org/10.1007/bf00752206
87 rdf:type schema:CreativeWork
88 sg:pub.10.1007/bf02645912 schema:sameAs https://app.dimensions.ai/details/publication/pub.1029979701
89 https://doi.org/10.1007/bf02645912
90 rdf:type schema:CreativeWork
91 sg:pub.10.1007/bf02668542 schema:sameAs https://app.dimensions.ai/details/publication/pub.1026915047
92 https://doi.org/10.1007/bf02668542
93 rdf:type schema:CreativeWork
94 https://doi.org/10.1016/0022-3697(61)90054-3 schema:sameAs https://app.dimensions.ai/details/publication/pub.1000441444
95 rdf:type schema:CreativeWork
96 https://doi.org/10.1080/09534962.1988.11818973 schema:sameAs https://app.dimensions.ai/details/publication/pub.1030511320
97 rdf:type schema:CreativeWork
98 https://doi.org/10.2464/jilm.28.8 schema:sameAs https://app.dimensions.ai/details/publication/pub.1012045132
99 rdf:type schema:CreativeWork
100 https://www.grid.ac/institutes/grid.166341.7 schema:alternateName Drexel University
101 schema:name Aluminum Casting Research Laboratory, Department of Materials Engineering, Drexel University, 19104, Philadelphia, PA
102 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...