An investigation of the effect of porosity and diluents on micropyretic synthesis View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

1993-03

AUTHORS

M. G. Lakshmikantha, J. A. Sekhar

ABSTRACT

A numerical model of combustion/micropyretic synthesis of a composite system is developed. The new features of the model include the consideration of melting of each constituent of the reactants and products and the inclusion of considerations involving dilution and porosity. The effect of porosity is to change both the thermal conductivity and density. The model for the porosity which is considered in this article shows the significance of its effect on the velocity and the type of the combustion front. Different values of porosities are considered for the reactants and products. For an illustrative analysis, a systematic study of the variation of porosity of reactants and products is carried out for the combustion synthesis of TiB2 and TiC. The numerical results indicate that as the reactant porosity values are decreased, the combustion velocity first increases because of an increase in the thermal conductivity. The combustion velocity, after reaching a maximum, decreases with a further decrease in the porosity. As the porosity is varied, there is a considerable effect on the nature of propagation of the combustion front, which may change from a steady state to an oscillatory mode. Results indicate that as the reactant porosity is decreased, the frequency of oscillations of the combustion front first increase and then decrease with a further decrease in the reactant porosity. The differences in the mechanism for the decrease in velocities at very low values of reactant porosities for the two systems TiC and TiB2 are identified. The results of considering different values of porosities in the reactants and the product are also presented. For the study of the effect of diluents, the product itself is considered as the diluent. The effect of adding the diluent to the initial reactants is to decrease the combustion temperature and the combustion velocity. The diluent also changes the mode of combustion. An increase in the amount of the diluent results in the decrease of the frequency of oscillations. More... »

PAGES

617-628

References to SciGraph publications

  • 1978-01. Structure of fluctuations occurring in the burning of tantalum-carbon mixtures in COMBUSTION, EXPLOSION, AND SHOCK WAVES
  • 1981-07. Unstable combustion modes of gasless systems in COMBUSTION, EXPLOSION, AND SHOCK WAVES
  • 1982-03. Trends in the spin combustion of thermites in COMBUSTION, EXPLOSION, AND SHOCK WAVES
  • 1979-05. Spin combustion of gasless systems in COMBUSTION, EXPLOSION, AND SHOCK WAVES
  • 1973-09. Autovibrational propagation of the combustion front in heterogeneous condensed media in COMBUSTION, EXPLOSION, AND SHOCK WAVES
  • 1983-03. Unstable regimes of thermite system combustion in COMBUSTION, EXPLOSION, AND SHOCK WAVES
  • 1975-05. Gasless combustion of metal powder mixtures in COMBUSTION, EXPLOSION, AND SHOCK WAVES
  • 1980. Handbook of Refractory Compounds in NONE
  • 1986-01. Combustion synthesis of titanium carbide: Theory and experiment in JOURNAL OF MATERIALS SCIENCE
  • 1974-01. Gasless combustion of mixtures of powdered transition metals with boron in COMBUSTION, EXPLOSION, AND SHOCK WAVES
  • 1991-05. Structure of the combustion wave in the combustion synthesis of titanium carbides in JOURNAL OF MATERIALS SCIENCE
  • 1991-12. Microstructural aspects of fabricating bodies by self-propagating synthesis in JOURNAL OF MATERIALS SCIENCE
  • 1971-01. Propagation of a pulsating exothermic reaction front in the condensed phase in COMBUSTION, EXPLOSION, AND SHOCK WAVES
  • 1992-01. Numerical modeling of solidification combustion synthesis in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 1987-01. An investigation of the synthesis of nickel aluminides through gasless combustion in JOURNAL OF MATERIALS SCIENCE
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/bf02656631

    DOI

    http://dx.doi.org/10.1007/bf02656631

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1032668767


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0915", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Interdisciplinary Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "Department of Materials Science and Engineering, International Center for Micropyretics, University of Cincinnati, 45221-0012, Cincinnati, OH", 
              "id": "http://www.grid.ac/institutes/grid.24827.3b", 
              "name": [
                "Department of Materials Science and Engineering, International Center for Micropyretics, University of Cincinnati, 45221-0012, Cincinnati, OH"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Lakshmikantha", 
            "givenName": "M. G.", 
            "id": "sg:person.010411052647.05", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010411052647.05"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Department of Materials Science and Engineering, International Center for Micropyretics, University of Cincinnati, 45221-0012, Cincinnati, OH", 
              "id": "http://www.grid.ac/institutes/grid.24827.3b", 
              "name": [
                "Department of Materials Science and Engineering, International Center for Micropyretics, University of Cincinnati, 45221-0012, Cincinnati, OH"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Sekhar", 
            "givenName": "J. A.", 
            "id": "sg:person.016661564161.49", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016661564161.49"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "sg:pub.10.1007/bf00761208", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1004365008", 
              "https://doi.org/10.1007/bf00761208"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02402643", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1013396605", 
              "https://doi.org/10.1007/bf02402643"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf00748907", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1022595522", 
              "https://doi.org/10.1007/bf00748907"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf01160566", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1052089103", 
              "https://doi.org/10.1007/bf01160566"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf00789607", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1012169876", 
              "https://doi.org/10.1007/bf00789607"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/978-1-4684-6099-5", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1109705536", 
              "https://doi.org/10.1007/978-1-4684-6099-5"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02387734", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1040021037", 
              "https://doi.org/10.1007/bf02387734"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf01463777", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1048508739", 
              "https://doi.org/10.1007/bf01463777"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf00789230", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1002240468", 
              "https://doi.org/10.1007/bf00789230"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf01144729", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1001356921", 
              "https://doi.org/10.1007/bf01144729"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf00789185", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1036295679", 
              "https://doi.org/10.1007/bf00789185"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02660847", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1047117684", 
              "https://doi.org/10.1007/bf02660847"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf00785083", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1022427294", 
              "https://doi.org/10.1007/bf00785083"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf00742879", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1021968427", 
              "https://doi.org/10.1007/bf00742879"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf00740533", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1002233989", 
              "https://doi.org/10.1007/bf00740533"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "1993-03", 
        "datePublishedReg": "1993-03-01", 
        "description": "A numerical model of combustion/micropyretic synthesis of a composite system is developed. The new features of the model include the consideration of melting of each constituent of the reactants and products and the inclusion of considerations involving dilution and porosity. The effect of porosity is to change both the thermal conductivity and density. The model for the porosity which is considered in this article shows the significance of its effect on the velocity and the type of the combustion front. Different values of porosities are considered for the reactants and products. For an illustrative analysis, a systematic study of the variation of porosity of reactants and products is carried out for the combustion synthesis of TiB2 and TiC. The numerical results indicate that as the reactant porosity values are decreased, the combustion velocity first increases because of an increase in the thermal conductivity. The combustion velocity, after reaching a maximum, decreases with a further decrease in the porosity. As the porosity is varied, there is a considerable effect on the nature of propagation of the combustion front, which may change from a steady state to an oscillatory mode. Results indicate that as the reactant porosity is decreased, the frequency of oscillations of the combustion front first increase and then decrease with a further decrease in the reactant porosity. The differences in the mechanism for the decrease in velocities at very low values of reactant porosities for the two systems TiC and TiB2 are identified. The results of considering different values of porosities in the reactants and the product are also presented. For the study of the effect of diluents, the product itself is considered as the diluent. The effect of adding the diluent to the initial reactants is to decrease the combustion temperature and the combustion velocity. The diluent also changes the mode of combustion. An increase in the amount of the diluent results in the decrease of the frequency of oscillations.", 
        "genre": "article", 
        "id": "sg:pub.10.1007/bf02656631", 
        "inLanguage": "en", 
        "isAccessibleForFree": false, 
        "isPartOf": [
          {
            "id": "sg:journal.1136292", 
            "issn": [
              "1073-5623", 
              "1543-1940"
            ], 
            "name": "Metallurgical and Materials Transactions A", 
            "publisher": "Springer Nature", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "3", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "24"
          }
        ], 
        "keywords": [
          "effect of porosity", 
          "micropyretic synthesis", 
          "combustion velocity", 
          "thermal conductivity", 
          "combustion front", 
          "mode of combustion", 
          "velocity first increases", 
          "variation of porosity", 
          "first increases", 
          "combustion temperature", 
          "frequency of oscillation", 
          "combustion synthesis", 
          "numerical model", 
          "composite system", 
          "porosity", 
          "porosity values", 
          "effect of diluents", 
          "TiB2", 
          "different values", 
          "inclusion of considerations", 
          "numerical results", 
          "velocity", 
          "nature of propagation", 
          "conductivity", 
          "considerable effect", 
          "oscillatory modes", 
          "diluent", 
          "combustion", 
          "front", 
          "steady state", 
          "reactants", 
          "lower values", 
          "TiC", 
          "initial reactants", 
          "mode", 
          "propagation", 
          "systematic study", 
          "temperature", 
          "oscillations", 
          "melting", 
          "model", 
          "further decrease", 
          "results", 
          "products", 
          "density", 
          "effect", 
          "new features", 
          "values", 
          "increase", 
          "frequency", 
          "consideration", 
          "decrease", 
          "investigation", 
          "system", 
          "amount", 
          "maximum", 
          "variation", 
          "synthesis", 
          "illustrative analysis", 
          "constituents", 
          "dilution", 
          "analysis", 
          "types", 
          "inclusion", 
          "features", 
          "study", 
          "mechanism", 
          "nature", 
          "state", 
          "article", 
          "differences", 
          "significance", 
          "combustion/micropyretic synthesis", 
          "consideration of melting", 
          "reactant porosity values", 
          "combustion velocity first increases", 
          "reactant porosity", 
          "combustion front first increase", 
          "front first increase", 
          "systems TiC", 
          "diluent results"
        ], 
        "name": "An investigation of the effect of porosity and diluents on micropyretic synthesis", 
        "pagination": "617-628", 
        "productId": [
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1032668767"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/bf02656631"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/bf02656631", 
          "https://app.dimensions.ai/details/publication/pub.1032668767"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2022-01-01T18:05", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-springernature-scigraph/baseset/20220101/entities/gbq_results/article/article_226.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "https://doi.org/10.1007/bf02656631"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/bf02656631'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/bf02656631'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/bf02656631'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/bf02656631'


     

    This table displays all metadata directly associated to this object as RDF triples.

    206 TRIPLES      22 PREDICATES      121 URIs      98 LITERALS      6 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/bf02656631 schema:about anzsrc-for:09
    2 anzsrc-for:0915
    3 schema:author Ncfdf30d0c64541c1afb166ed038119ea
    4 schema:citation sg:pub.10.1007/978-1-4684-6099-5
    5 sg:pub.10.1007/bf00740533
    6 sg:pub.10.1007/bf00742879
    7 sg:pub.10.1007/bf00748907
    8 sg:pub.10.1007/bf00761208
    9 sg:pub.10.1007/bf00785083
    10 sg:pub.10.1007/bf00789185
    11 sg:pub.10.1007/bf00789230
    12 sg:pub.10.1007/bf00789607
    13 sg:pub.10.1007/bf01144729
    14 sg:pub.10.1007/bf01160566
    15 sg:pub.10.1007/bf01463777
    16 sg:pub.10.1007/bf02387734
    17 sg:pub.10.1007/bf02402643
    18 sg:pub.10.1007/bf02660847
    19 schema:datePublished 1993-03
    20 schema:datePublishedReg 1993-03-01
    21 schema:description A numerical model of combustion/micropyretic synthesis of a composite system is developed. The new features of the model include the consideration of melting of each constituent of the reactants and products and the inclusion of considerations involving dilution and porosity. The effect of porosity is to change both the thermal conductivity and density. The model for the porosity which is considered in this article shows the significance of its effect on the velocity and the type of the combustion front. Different values of porosities are considered for the reactants and products. For an illustrative analysis, a systematic study of the variation of porosity of reactants and products is carried out for the combustion synthesis of TiB2 and TiC. The numerical results indicate that as the reactant porosity values are decreased, the combustion velocity first increases because of an increase in the thermal conductivity. The combustion velocity, after reaching a maximum, decreases with a further decrease in the porosity. As the porosity is varied, there is a considerable effect on the nature of propagation of the combustion front, which may change from a steady state to an oscillatory mode. Results indicate that as the reactant porosity is decreased, the frequency of oscillations of the combustion front first increase and then decrease with a further decrease in the reactant porosity. The differences in the mechanism for the decrease in velocities at very low values of reactant porosities for the two systems TiC and TiB2 are identified. The results of considering different values of porosities in the reactants and the product are also presented. For the study of the effect of diluents, the product itself is considered as the diluent. The effect of adding the diluent to the initial reactants is to decrease the combustion temperature and the combustion velocity. The diluent also changes the mode of combustion. An increase in the amount of the diluent results in the decrease of the frequency of oscillations.
    22 schema:genre article
    23 schema:inLanguage en
    24 schema:isAccessibleForFree false
    25 schema:isPartOf N6f83c1c0fdf74abcb3d1e7a782177e3a
    26 Nfe471c656e4f4c018c92375af5076585
    27 sg:journal.1136292
    28 schema:keywords TiB2
    29 TiC
    30 amount
    31 analysis
    32 article
    33 combustion
    34 combustion front
    35 combustion front first increase
    36 combustion synthesis
    37 combustion temperature
    38 combustion velocity
    39 combustion velocity first increases
    40 combustion/micropyretic synthesis
    41 composite system
    42 conductivity
    43 considerable effect
    44 consideration
    45 consideration of melting
    46 constituents
    47 decrease
    48 density
    49 differences
    50 different values
    51 diluent
    52 diluent results
    53 dilution
    54 effect
    55 effect of diluents
    56 effect of porosity
    57 features
    58 first increases
    59 frequency
    60 frequency of oscillation
    61 front
    62 front first increase
    63 further decrease
    64 illustrative analysis
    65 inclusion
    66 inclusion of considerations
    67 increase
    68 initial reactants
    69 investigation
    70 lower values
    71 maximum
    72 mechanism
    73 melting
    74 micropyretic synthesis
    75 mode
    76 mode of combustion
    77 model
    78 nature
    79 nature of propagation
    80 new features
    81 numerical model
    82 numerical results
    83 oscillations
    84 oscillatory modes
    85 porosity
    86 porosity values
    87 products
    88 propagation
    89 reactant porosity
    90 reactant porosity values
    91 reactants
    92 results
    93 significance
    94 state
    95 steady state
    96 study
    97 synthesis
    98 system
    99 systematic study
    100 systems TiC
    101 temperature
    102 thermal conductivity
    103 types
    104 values
    105 variation
    106 variation of porosity
    107 velocity
    108 velocity first increases
    109 schema:name An investigation of the effect of porosity and diluents on micropyretic synthesis
    110 schema:pagination 617-628
    111 schema:productId N4c596c0d204a45bab4d2aad9905d528f
    112 N77f3cb222f34486d8958e4833e26d739
    113 schema:sameAs https://app.dimensions.ai/details/publication/pub.1032668767
    114 https://doi.org/10.1007/bf02656631
    115 schema:sdDatePublished 2022-01-01T18:05
    116 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    117 schema:sdPublisher N83d58cecb38f47abb858e10cf1740b2d
    118 schema:url https://doi.org/10.1007/bf02656631
    119 sgo:license sg:explorer/license/
    120 sgo:sdDataset articles
    121 rdf:type schema:ScholarlyArticle
    122 N4c596c0d204a45bab4d2aad9905d528f schema:name dimensions_id
    123 schema:value pub.1032668767
    124 rdf:type schema:PropertyValue
    125 N6f83c1c0fdf74abcb3d1e7a782177e3a schema:issueNumber 3
    126 rdf:type schema:PublicationIssue
    127 N77f3cb222f34486d8958e4833e26d739 schema:name doi
    128 schema:value 10.1007/bf02656631
    129 rdf:type schema:PropertyValue
    130 N83d58cecb38f47abb858e10cf1740b2d schema:name Springer Nature - SN SciGraph project
    131 rdf:type schema:Organization
    132 Nc669d12e570c4a2cb37459db7bace8c1 rdf:first sg:person.016661564161.49
    133 rdf:rest rdf:nil
    134 Ncfdf30d0c64541c1afb166ed038119ea rdf:first sg:person.010411052647.05
    135 rdf:rest Nc669d12e570c4a2cb37459db7bace8c1
    136 Nfe471c656e4f4c018c92375af5076585 schema:volumeNumber 24
    137 rdf:type schema:PublicationVolume
    138 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    139 schema:name Engineering
    140 rdf:type schema:DefinedTerm
    141 anzsrc-for:0915 schema:inDefinedTermSet anzsrc-for:
    142 schema:name Interdisciplinary Engineering
    143 rdf:type schema:DefinedTerm
    144 sg:journal.1136292 schema:issn 1073-5623
    145 1543-1940
    146 schema:name Metallurgical and Materials Transactions A
    147 schema:publisher Springer Nature
    148 rdf:type schema:Periodical
    149 sg:person.010411052647.05 schema:affiliation grid-institutes:grid.24827.3b
    150 schema:familyName Lakshmikantha
    151 schema:givenName M. G.
    152 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010411052647.05
    153 rdf:type schema:Person
    154 sg:person.016661564161.49 schema:affiliation grid-institutes:grid.24827.3b
    155 schema:familyName Sekhar
    156 schema:givenName J. A.
    157 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016661564161.49
    158 rdf:type schema:Person
    159 sg:pub.10.1007/978-1-4684-6099-5 schema:sameAs https://app.dimensions.ai/details/publication/pub.1109705536
    160 https://doi.org/10.1007/978-1-4684-6099-5
    161 rdf:type schema:CreativeWork
    162 sg:pub.10.1007/bf00740533 schema:sameAs https://app.dimensions.ai/details/publication/pub.1002233989
    163 https://doi.org/10.1007/bf00740533
    164 rdf:type schema:CreativeWork
    165 sg:pub.10.1007/bf00742879 schema:sameAs https://app.dimensions.ai/details/publication/pub.1021968427
    166 https://doi.org/10.1007/bf00742879
    167 rdf:type schema:CreativeWork
    168 sg:pub.10.1007/bf00748907 schema:sameAs https://app.dimensions.ai/details/publication/pub.1022595522
    169 https://doi.org/10.1007/bf00748907
    170 rdf:type schema:CreativeWork
    171 sg:pub.10.1007/bf00761208 schema:sameAs https://app.dimensions.ai/details/publication/pub.1004365008
    172 https://doi.org/10.1007/bf00761208
    173 rdf:type schema:CreativeWork
    174 sg:pub.10.1007/bf00785083 schema:sameAs https://app.dimensions.ai/details/publication/pub.1022427294
    175 https://doi.org/10.1007/bf00785083
    176 rdf:type schema:CreativeWork
    177 sg:pub.10.1007/bf00789185 schema:sameAs https://app.dimensions.ai/details/publication/pub.1036295679
    178 https://doi.org/10.1007/bf00789185
    179 rdf:type schema:CreativeWork
    180 sg:pub.10.1007/bf00789230 schema:sameAs https://app.dimensions.ai/details/publication/pub.1002240468
    181 https://doi.org/10.1007/bf00789230
    182 rdf:type schema:CreativeWork
    183 sg:pub.10.1007/bf00789607 schema:sameAs https://app.dimensions.ai/details/publication/pub.1012169876
    184 https://doi.org/10.1007/bf00789607
    185 rdf:type schema:CreativeWork
    186 sg:pub.10.1007/bf01144729 schema:sameAs https://app.dimensions.ai/details/publication/pub.1001356921
    187 https://doi.org/10.1007/bf01144729
    188 rdf:type schema:CreativeWork
    189 sg:pub.10.1007/bf01160566 schema:sameAs https://app.dimensions.ai/details/publication/pub.1052089103
    190 https://doi.org/10.1007/bf01160566
    191 rdf:type schema:CreativeWork
    192 sg:pub.10.1007/bf01463777 schema:sameAs https://app.dimensions.ai/details/publication/pub.1048508739
    193 https://doi.org/10.1007/bf01463777
    194 rdf:type schema:CreativeWork
    195 sg:pub.10.1007/bf02387734 schema:sameAs https://app.dimensions.ai/details/publication/pub.1040021037
    196 https://doi.org/10.1007/bf02387734
    197 rdf:type schema:CreativeWork
    198 sg:pub.10.1007/bf02402643 schema:sameAs https://app.dimensions.ai/details/publication/pub.1013396605
    199 https://doi.org/10.1007/bf02402643
    200 rdf:type schema:CreativeWork
    201 sg:pub.10.1007/bf02660847 schema:sameAs https://app.dimensions.ai/details/publication/pub.1047117684
    202 https://doi.org/10.1007/bf02660847
    203 rdf:type schema:CreativeWork
    204 grid-institutes:grid.24827.3b schema:alternateName Department of Materials Science and Engineering, International Center for Micropyretics, University of Cincinnati, 45221-0012, Cincinnati, OH
    205 schema:name Department of Materials Science and Engineering, International Center for Micropyretics, University of Cincinnati, 45221-0012, Cincinnati, OH
    206 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...