Effect of solidification conditions on the solidification mode in austenitic stainless steels View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

1983-02

AUTHORS

N. Suutala

ABSTRACT

The effect of the solidification conditions on the solidification mode in the composition range in which the primary austenitic and ferritic modes compete is studied by varying the welding parameters in gas tungsten arc (GTA) welding and by comparing the results with those obtained from other laboratory experiments. A good agreement holds if the effect of the composition is described by the ratio Creq/Nieq (Creq = pct Cr + 1.37 × pct Mo + 1.5 × pct Si + 2 × pct Nb + 3 × pct Ti and Nieq = pct Ni + 0.31 × pct Mn + 22 × pct C + 14.2 × pct N + pct Cu) and the effect of the solidification conditions by the growth rate. The critical value of the ratio Creq/Nieq corresponding to the transition from primary austenitic to ferritic solidification increases from 1.43 to 1.55 with increasing growth rate. The upper limit is valid in GTA welding at high welding speeds, while the lower limit corresponds to the practical conditions which exist in ingot and shaped casting. The validity and applicability of this solidification model are discussed. More... »

PAGES

191-197

References to SciGraph publications

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/bf02651615

DOI

http://dx.doi.org/10.1007/bf02651615

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1010792012


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Materials Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "Stainless Steel Division, Research Engineer, Outokumpu Company, Tornio, Finland", 
          "id": "http://www.grid.ac/institutes/None", 
          "name": [
            "Stainless Steel Division, Research Engineer, Outokumpu Company, Tornio, Finland"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Suutala", 
        "givenName": "N.", 
        "type": "Person"
      }
    ], 
    "citation": [
      {
        "id": "sg:pub.10.1007/bf02648382", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1000277675", 
          "https://doi.org/10.1007/bf02648382"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02652872", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1009452976", 
          "https://doi.org/10.1007/bf02652872"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02697081", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1034315795", 
          "https://doi.org/10.1007/bf02697081"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02811663", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1024523688", 
          "https://doi.org/10.1007/bf02811663"
        ], 
        "type": "CreativeWork"
      }, 
      {
        "id": "sg:pub.10.1007/bf02661201", 
        "sameAs": [
          "https://app.dimensions.ai/details/publication/pub.1050599191", 
          "https://doi.org/10.1007/bf02661201"
        ], 
        "type": "CreativeWork"
      }
    ], 
    "datePublished": "1983-02", 
    "datePublishedReg": "1983-02-01", 
    "description": "The effect of the solidification conditions on the solidification mode in the composition range in which the primary austenitic and ferritic modes compete is studied by varying the welding parameters in gas tungsten arc (GTA) welding and by comparing the results with those obtained from other laboratory experiments. A good agreement holds if the effect of the composition is described by the ratio Creq/Nieq (Creq = pct Cr + 1.37 \u00d7 pct Mo + 1.5 \u00d7 pct Si + 2 \u00d7 pct Nb + 3 \u00d7 pct Ti and Nieq = pct Ni + 0.31 \u00d7 pct Mn + 22 \u00d7 pct C + 14.2 \u00d7 pct N + pct Cu) and the effect of the solidification conditions by the growth rate. The critical value of the ratio Creq/Nieq corresponding to the transition from primary austenitic to ferritic solidification increases from 1.43 to 1.55 with increasing growth rate. The upper limit is valid in GTA welding at high welding speeds, while the lower limit corresponds to the practical conditions which exist in ingot and shaped casting. The validity and applicability of this solidification model are discussed.", 
    "genre": "article", 
    "id": "sg:pub.10.1007/bf02651615", 
    "inLanguage": "en", 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1136292", 
        "issn": [
          "1073-5623", 
          "1543-1940"
        ], 
        "name": "Metallurgical and Materials Transactions A", 
        "publisher": "Springer Nature", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "1", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "14"
      }
    ], 
    "keywords": [
      "solidification conditions", 
      "Creq/Nieq", 
      "solidification mode", 
      "gas tungsten arc welding", 
      "tungsten arc welding", 
      "high welding speed", 
      "austenitic stainless steel", 
      "welding speed", 
      "welding parameters", 
      "arc welding", 
      "GTA welding", 
      "stainless steel", 
      "solidification model", 
      "solidification increases", 
      "welding", 
      "Nieq", 
      "practical conditions", 
      "good agreement", 
      "laboratory experiments", 
      "critical value", 
      "austenitic", 
      "steel", 
      "composition range", 
      "ingots", 
      "growth rate", 
      "conditions", 
      "mode", 
      "speed", 
      "limit corresponds", 
      "effect", 
      "parameters", 
      "agreement", 
      "applicability", 
      "range", 
      "experiments", 
      "rate", 
      "model", 
      "composition", 
      "upper limit", 
      "results", 
      "limit", 
      "corresponds", 
      "values", 
      "transition", 
      "increase", 
      "validity", 
      "competes", 
      "ferritic modes compete", 
      "modes compete", 
      "ratio Creq/Nieq", 
      "primary austenitic", 
      "ferritic solidification increases", 
      "lower limit corresponds"
    ], 
    "name": "Effect of solidification conditions on the solidification mode in austenitic stainless steels", 
    "pagination": "191-197", 
    "productId": [
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1010792012"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/bf02651615"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/bf02651615", 
      "https://app.dimensions.ai/details/publication/pub.1010792012"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2022-01-01T18:02", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-springernature-scigraph/baseset/20220101/entities/gbq_results/article/article_161.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "https://doi.org/10.1007/bf02651615"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/bf02651615'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/bf02651615'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/bf02651615'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/bf02651615'


 

This table displays all metadata directly associated to this object as RDF triples.

130 TRIPLES      22 PREDICATES      84 URIs      71 LITERALS      6 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/bf02651615 schema:about anzsrc-for:09
2 anzsrc-for:0912
3 schema:author Na33913148d294aa28551834161cb0991
4 schema:citation sg:pub.10.1007/bf02648382
5 sg:pub.10.1007/bf02652872
6 sg:pub.10.1007/bf02661201
7 sg:pub.10.1007/bf02697081
8 sg:pub.10.1007/bf02811663
9 schema:datePublished 1983-02
10 schema:datePublishedReg 1983-02-01
11 schema:description The effect of the solidification conditions on the solidification mode in the composition range in which the primary austenitic and ferritic modes compete is studied by varying the welding parameters in gas tungsten arc (GTA) welding and by comparing the results with those obtained from other laboratory experiments. A good agreement holds if the effect of the composition is described by the ratio Creq/Nieq (Creq = pct Cr + 1.37 × pct Mo + 1.5 × pct Si + 2 × pct Nb + 3 × pct Ti and Nieq = pct Ni + 0.31 × pct Mn + 22 × pct C + 14.2 × pct N + pct Cu) and the effect of the solidification conditions by the growth rate. The critical value of the ratio Creq/Nieq corresponding to the transition from primary austenitic to ferritic solidification increases from 1.43 to 1.55 with increasing growth rate. The upper limit is valid in GTA welding at high welding speeds, while the lower limit corresponds to the practical conditions which exist in ingot and shaped casting. The validity and applicability of this solidification model are discussed.
12 schema:genre article
13 schema:inLanguage en
14 schema:isAccessibleForFree false
15 schema:isPartOf N0740ca591e4e4d389f5cda2d77599d4d
16 Na58770368cbc456d8434546949afc709
17 sg:journal.1136292
18 schema:keywords Creq/Nieq
19 GTA welding
20 Nieq
21 agreement
22 applicability
23 arc welding
24 austenitic
25 austenitic stainless steel
26 competes
27 composition
28 composition range
29 conditions
30 corresponds
31 critical value
32 effect
33 experiments
34 ferritic modes compete
35 ferritic solidification increases
36 gas tungsten arc welding
37 good agreement
38 growth rate
39 high welding speed
40 increase
41 ingots
42 laboratory experiments
43 limit
44 limit corresponds
45 lower limit corresponds
46 mode
47 model
48 modes compete
49 parameters
50 practical conditions
51 primary austenitic
52 range
53 rate
54 ratio Creq/Nieq
55 results
56 solidification conditions
57 solidification increases
58 solidification mode
59 solidification model
60 speed
61 stainless steel
62 steel
63 transition
64 tungsten arc welding
65 upper limit
66 validity
67 values
68 welding
69 welding parameters
70 welding speed
71 schema:name Effect of solidification conditions on the solidification mode in austenitic stainless steels
72 schema:pagination 191-197
73 schema:productId N6f827f4e686543b893960b02fc0919ad
74 Nc8356dfab929498bb1fd5899c83d7bac
75 schema:sameAs https://app.dimensions.ai/details/publication/pub.1010792012
76 https://doi.org/10.1007/bf02651615
77 schema:sdDatePublished 2022-01-01T18:02
78 schema:sdLicense https://scigraph.springernature.com/explorer/license/
79 schema:sdPublisher N43a43e77f4e74fdbb93e9f42931b8dc6
80 schema:url https://doi.org/10.1007/bf02651615
81 sgo:license sg:explorer/license/
82 sgo:sdDataset articles
83 rdf:type schema:ScholarlyArticle
84 N0740ca591e4e4d389f5cda2d77599d4d schema:volumeNumber 14
85 rdf:type schema:PublicationVolume
86 N43a43e77f4e74fdbb93e9f42931b8dc6 schema:name Springer Nature - SN SciGraph project
87 rdf:type schema:Organization
88 N562bc2470b474268bc16838302e2f499 schema:affiliation grid-institutes:None
89 schema:familyName Suutala
90 schema:givenName N.
91 rdf:type schema:Person
92 N6f827f4e686543b893960b02fc0919ad schema:name dimensions_id
93 schema:value pub.1010792012
94 rdf:type schema:PropertyValue
95 Na33913148d294aa28551834161cb0991 rdf:first N562bc2470b474268bc16838302e2f499
96 rdf:rest rdf:nil
97 Na58770368cbc456d8434546949afc709 schema:issueNumber 1
98 rdf:type schema:PublicationIssue
99 Nc8356dfab929498bb1fd5899c83d7bac schema:name doi
100 schema:value 10.1007/bf02651615
101 rdf:type schema:PropertyValue
102 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
103 schema:name Engineering
104 rdf:type schema:DefinedTerm
105 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
106 schema:name Materials Engineering
107 rdf:type schema:DefinedTerm
108 sg:journal.1136292 schema:issn 1073-5623
109 1543-1940
110 schema:name Metallurgical and Materials Transactions A
111 schema:publisher Springer Nature
112 rdf:type schema:Periodical
113 sg:pub.10.1007/bf02648382 schema:sameAs https://app.dimensions.ai/details/publication/pub.1000277675
114 https://doi.org/10.1007/bf02648382
115 rdf:type schema:CreativeWork
116 sg:pub.10.1007/bf02652872 schema:sameAs https://app.dimensions.ai/details/publication/pub.1009452976
117 https://doi.org/10.1007/bf02652872
118 rdf:type schema:CreativeWork
119 sg:pub.10.1007/bf02661201 schema:sameAs https://app.dimensions.ai/details/publication/pub.1050599191
120 https://doi.org/10.1007/bf02661201
121 rdf:type schema:CreativeWork
122 sg:pub.10.1007/bf02697081 schema:sameAs https://app.dimensions.ai/details/publication/pub.1034315795
123 https://doi.org/10.1007/bf02697081
124 rdf:type schema:CreativeWork
125 sg:pub.10.1007/bf02811663 schema:sameAs https://app.dimensions.ai/details/publication/pub.1024523688
126 https://doi.org/10.1007/bf02811663
127 rdf:type schema:CreativeWork
128 grid-institutes:None schema:alternateName Stainless Steel Division, Research Engineer, Outokumpu Company, Tornio, Finland
129 schema:name Stainless Steel Division, Research Engineer, Outokumpu Company, Tornio, Finland
130 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...