Semi-solid deformation in multi-component nickel aluminide View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

1993-07

AUTHORS

C. S. Lin, J. A. Sekhar

ABSTRACT

A systematic study was carried out to determine the solidification and tensile behaviour of semi-solid multi-component nickel aluminide. Controlled equiaxed-solidified samples were tested at various temperatures in the mushy (semi-solid) region. A special Gleeble testing procedure was developed where the samples were quickly raised to a predetermined temperature in the semi-solid zone and fractured. The fracture stress was noted to decrease monotonically with temperature. The strain to fracture exhibited a ductility minimum at an intermediate temperature in the semi-solid zone. For the equiaxed-solidified samples, the fracture stress was found to decrease with increasing cooling rate at any given temperature. At the temperature corresponding to the strain minimum, residual microcracks were detected on the fracture surface. The upper hot-tearing temperature was found to be a function of the solidification variables. The amount of strain accommodation and the hot tearing resistance was found to be a function of solidification microstructure. A fracture map, which is the fracture stress, temperature and cooling rate (σf-T-T) diagram for the equiaxed microstructures, is presented and a castability map is created from the fracture data. More... »

PAGES

3581-3588

References to SciGraph publications

  • 1984-01. Compression of semi-solid dendritic Sn-Pb alloys at low strain rates in METALLURGICAL AND MATERIALS TRANSACTIONS B
  • 1982-10. Effect of Strain Rate on Deformation Behavior of Semi-Solid Dendritic Alloys in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 1980-11. Strengthening of wrought aluminum alloys by fractional melting in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 1977-09. Die thermal behavior in machine casting of partially solid high temperature alloys in METALLURGICAL AND MATERIALS TRANSACTIONS B
  • <error retrieving object. in <ERROR RETRIEVING OBJECT
  • 1991-02. The relationship between carbon content, microstructure, and intergranular liquation cracking in cast nickel alloy 718 in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 1991-01. Solidification microporosity in directionally solidified multicomponent nickel aluminide in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 1993-01-01. Semi-solid deformation in multi-component nickel aluminide in JOURNAL OF MATERIALS SCIENCE
  • 1979-03. Refining by fractional solidification in METALLURGICAL AND MATERIALS TRANSACTIONS B
  • 1989-12. Solidification of the nickel-base superalloy 718: A phase diagram approach in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 1981-03. Modeling of continuous strip production by rheocasting in METALLURGICAL AND MATERIALS TRANSACTIONS B
  • Identifiers

    URI

    http://scigraph.springernature.com/pub.10.1007/bf01159840

    DOI

    http://dx.doi.org/10.1007/bf01159840

    DIMENSIONS

    https://app.dimensions.ai/details/publication/pub.1039721304


    Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
    Incoming Citations Browse incoming citations for this publication using opencitations.net

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
            "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
            "name": "Materials Engineering", 
            "type": "DefinedTerm"
          }
        ], 
        "author": [
          {
            "affiliation": {
              "alternateName": "Department of Materials Science and Engineering, University of Cincinnati, 45221-0012, Cincinnati, OH, USA", 
              "id": "http://www.grid.ac/institutes/grid.24827.3b", 
              "name": [
                "Department of Materials Science and Engineering, University of Cincinnati, 45221-0012, Cincinnati, OH, USA"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Lin", 
            "givenName": "C. S.", 
            "id": "sg:person.010363230501.68", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010363230501.68"
            ], 
            "type": "Person"
          }, 
          {
            "affiliation": {
              "alternateName": "Department of Materials Science and Engineering, University of Cincinnati, 45221-0012, Cincinnati, OH, USA", 
              "id": "http://www.grid.ac/institutes/grid.24827.3b", 
              "name": [
                "Department of Materials Science and Engineering, University of Cincinnati, 45221-0012, Cincinnati, OH, USA"
              ], 
              "type": "Organization"
            }, 
            "familyName": "Sekhar", 
            "givenName": "J. A.", 
            "id": "sg:person.016661564161.49", 
            "sameAs": [
              "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016661564161.49"
            ], 
            "type": "Person"
          }
        ], 
        "citation": [
          {
            "id": "sg:pub.10.1007/bf00353196", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1032762739", 
              "https://doi.org/10.1007/bf00353196"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02652472", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1012295633", 
              "https://doi.org/10.1007/bf02652472"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf03350964", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1029792246", 
              "https://doi.org/10.1007/bf03350964"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02653975", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1015466554", 
              "https://doi.org/10.1007/bf02653975"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02647837", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1037799733", 
              "https://doi.org/10.1007/bf02647837"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02661076", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1041939838", 
              "https://doi.org/10.1007/bf02661076"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02656823", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1038218357", 
              "https://doi.org/10.1007/bf02656823"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02696935", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1005544842", 
              "https://doi.org/10.1007/bf02696935"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02655091", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1046904813", 
              "https://doi.org/10.1007/bf02655091"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02670181", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1005864147", 
              "https://doi.org/10.1007/bf02670181"
            ], 
            "type": "CreativeWork"
          }, 
          {
            "id": "sg:pub.10.1007/bf02674755", 
            "sameAs": [
              "https://app.dimensions.ai/details/publication/pub.1005966315", 
              "https://doi.org/10.1007/bf02674755"
            ], 
            "type": "CreativeWork"
          }
        ], 
        "datePublished": "1993-07", 
        "datePublishedReg": "1993-07-01", 
        "description": "A systematic study was carried out to determine the solidification and tensile behaviour of semi-solid multi-component nickel aluminide. Controlled equiaxed-solidified samples were tested at various temperatures in the mushy (semi-solid) region. A special Gleeble testing procedure was developed where the samples were quickly raised to a predetermined temperature in the semi-solid zone and fractured. The fracture stress was noted to decrease monotonically with temperature. The strain to fracture exhibited a ductility minimum at an intermediate temperature in the semi-solid zone. For the equiaxed-solidified samples, the fracture stress was found to decrease with increasing cooling rate at any given temperature. At the temperature corresponding to the strain minimum, residual microcracks were detected on the fracture surface. The upper hot-tearing temperature was found to be a function of the solidification variables. The amount of strain accommodation and the hot tearing resistance was found to be a function of solidification microstructure. A fracture map, which is the fracture stress, temperature and cooling rate (\u03c3f-T-T) diagram for the equiaxed microstructures, is presented and a castability map is created from the fracture data.", 
        "genre": "article", 
        "id": "sg:pub.10.1007/bf01159840", 
        "inLanguage": "en", 
        "isAccessibleForFree": false, 
        "isPartOf": [
          {
            "id": "sg:journal.1312116", 
            "issn": [
              "0022-2461", 
              "1573-4811"
            ], 
            "name": "Journal of Materials Science", 
            "publisher": "Springer Nature", 
            "type": "Periodical"
          }, 
          {
            "issueNumber": "13", 
            "type": "PublicationIssue"
          }, 
          {
            "type": "PublicationVolume", 
            "volumeNumber": "28"
          }
        ], 
        "keywords": [
          "semi-solid zone", 
          "fracture stress", 
          "nickel aluminide", 
          "semi-solid deformation", 
          "hot tearing resistance", 
          "residual microcracks", 
          "ductility minimum", 
          "fracture surfaces", 
          "tensile behavior", 
          "solidification microstructure", 
          "solidification variables", 
          "tearing resistance", 
          "mushy region", 
          "fracture maps", 
          "strain accommodation", 
          "predetermined temperature", 
          "intermediate temperatures", 
          "aluminides", 
          "microstructure", 
          "fracture data", 
          "rate diagram", 
          "temperature", 
          "microcracks", 
          "solidification", 
          "testing procedures", 
          "deformation", 
          "stress", 
          "zone", 
          "systematic study", 
          "surface", 
          "behavior", 
          "resistance", 
          "diagram", 
          "maps", 
          "minimum", 
          "samples", 
          "amount", 
          "strains", 
          "rate", 
          "function", 
          "procedure", 
          "region", 
          "variables", 
          "data", 
          "study", 
          "accommodation"
        ], 
        "name": "Semi-solid deformation in multi-component nickel aluminide", 
        "pagination": "3581-3588", 
        "productId": [
          {
            "name": "dimensions_id", 
            "type": "PropertyValue", 
            "value": [
              "pub.1039721304"
            ]
          }, 
          {
            "name": "doi", 
            "type": "PropertyValue", 
            "value": [
              "10.1007/bf01159840"
            ]
          }
        ], 
        "sameAs": [
          "https://doi.org/10.1007/bf01159840", 
          "https://app.dimensions.ai/details/publication/pub.1039721304"
        ], 
        "sdDataset": "articles", 
        "sdDatePublished": "2022-05-20T07:19", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-springernature-scigraph/baseset/20220519/entities/gbq_results/article/article_234.jsonl", 
        "type": "ScholarlyArticle", 
        "url": "https://doi.org/10.1007/bf01159840"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/bf01159840'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/bf01159840'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/bf01159840'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/bf01159840'


     

    This table displays all metadata directly associated to this object as RDF triples.

    155 TRIPLES      22 PREDICATES      83 URIs      64 LITERALS      6 BLANK NODES

    Subject Predicate Object
    1 sg:pub.10.1007/bf01159840 schema:about anzsrc-for:09
    2 anzsrc-for:0912
    3 schema:author N077ee7ebcc6c4183b252b2595c18a05f
    4 schema:citation sg:pub.10.1007/bf00353196
    5 sg:pub.10.1007/bf02647837
    6 sg:pub.10.1007/bf02652472
    7 sg:pub.10.1007/bf02653975
    8 sg:pub.10.1007/bf02655091
    9 sg:pub.10.1007/bf02656823
    10 sg:pub.10.1007/bf02661076
    11 sg:pub.10.1007/bf02670181
    12 sg:pub.10.1007/bf02674755
    13 sg:pub.10.1007/bf02696935
    14 sg:pub.10.1007/bf03350964
    15 schema:datePublished 1993-07
    16 schema:datePublishedReg 1993-07-01
    17 schema:description A systematic study was carried out to determine the solidification and tensile behaviour of semi-solid multi-component nickel aluminide. Controlled equiaxed-solidified samples were tested at various temperatures in the mushy (semi-solid) region. A special Gleeble testing procedure was developed where the samples were quickly raised to a predetermined temperature in the semi-solid zone and fractured. The fracture stress was noted to decrease monotonically with temperature. The strain to fracture exhibited a ductility minimum at an intermediate temperature in the semi-solid zone. For the equiaxed-solidified samples, the fracture stress was found to decrease with increasing cooling rate at any given temperature. At the temperature corresponding to the strain minimum, residual microcracks were detected on the fracture surface. The upper hot-tearing temperature was found to be a function of the solidification variables. The amount of strain accommodation and the hot tearing resistance was found to be a function of solidification microstructure. A fracture map, which is the fracture stress, temperature and cooling rate (σf-T-T) diagram for the equiaxed microstructures, is presented and a castability map is created from the fracture data.
    18 schema:genre article
    19 schema:inLanguage en
    20 schema:isAccessibleForFree false
    21 schema:isPartOf N5528034b0b17476d850cb02819edb63f
    22 Nb840a161a737419d89f71b093be115bd
    23 sg:journal.1312116
    24 schema:keywords accommodation
    25 aluminides
    26 amount
    27 behavior
    28 data
    29 deformation
    30 diagram
    31 ductility minimum
    32 fracture data
    33 fracture maps
    34 fracture stress
    35 fracture surfaces
    36 function
    37 hot tearing resistance
    38 intermediate temperatures
    39 maps
    40 microcracks
    41 microstructure
    42 minimum
    43 mushy region
    44 nickel aluminide
    45 predetermined temperature
    46 procedure
    47 rate
    48 rate diagram
    49 region
    50 residual microcracks
    51 resistance
    52 samples
    53 semi-solid deformation
    54 semi-solid zone
    55 solidification
    56 solidification microstructure
    57 solidification variables
    58 strain accommodation
    59 strains
    60 stress
    61 study
    62 surface
    63 systematic study
    64 tearing resistance
    65 temperature
    66 tensile behavior
    67 testing procedures
    68 variables
    69 zone
    70 schema:name Semi-solid deformation in multi-component nickel aluminide
    71 schema:pagination 3581-3588
    72 schema:productId N1142e0feb9864ce1a7075fe3938cf94b
    73 N19c643bc52b74dad86f3d57cc7bb6a28
    74 schema:sameAs https://app.dimensions.ai/details/publication/pub.1039721304
    75 https://doi.org/10.1007/bf01159840
    76 schema:sdDatePublished 2022-05-20T07:19
    77 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    78 schema:sdPublisher Na6e3f3c60ad14811a9b1d8020b03dc65
    79 schema:url https://doi.org/10.1007/bf01159840
    80 sgo:license sg:explorer/license/
    81 sgo:sdDataset articles
    82 rdf:type schema:ScholarlyArticle
    83 N077ee7ebcc6c4183b252b2595c18a05f rdf:first sg:person.010363230501.68
    84 rdf:rest N80bac3f691694795bbbd0f93a430a826
    85 N1142e0feb9864ce1a7075fe3938cf94b schema:name dimensions_id
    86 schema:value pub.1039721304
    87 rdf:type schema:PropertyValue
    88 N19c643bc52b74dad86f3d57cc7bb6a28 schema:name doi
    89 schema:value 10.1007/bf01159840
    90 rdf:type schema:PropertyValue
    91 N5528034b0b17476d850cb02819edb63f schema:issueNumber 13
    92 rdf:type schema:PublicationIssue
    93 N80bac3f691694795bbbd0f93a430a826 rdf:first sg:person.016661564161.49
    94 rdf:rest rdf:nil
    95 Na6e3f3c60ad14811a9b1d8020b03dc65 schema:name Springer Nature - SN SciGraph project
    96 rdf:type schema:Organization
    97 Nb840a161a737419d89f71b093be115bd schema:volumeNumber 28
    98 rdf:type schema:PublicationVolume
    99 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
    100 schema:name Engineering
    101 rdf:type schema:DefinedTerm
    102 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
    103 schema:name Materials Engineering
    104 rdf:type schema:DefinedTerm
    105 sg:journal.1312116 schema:issn 0022-2461
    106 1573-4811
    107 schema:name Journal of Materials Science
    108 schema:publisher Springer Nature
    109 rdf:type schema:Periodical
    110 sg:person.010363230501.68 schema:affiliation grid-institutes:grid.24827.3b
    111 schema:familyName Lin
    112 schema:givenName C. S.
    113 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010363230501.68
    114 rdf:type schema:Person
    115 sg:person.016661564161.49 schema:affiliation grid-institutes:grid.24827.3b
    116 schema:familyName Sekhar
    117 schema:givenName J. A.
    118 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016661564161.49
    119 rdf:type schema:Person
    120 sg:pub.10.1007/bf00353196 schema:sameAs https://app.dimensions.ai/details/publication/pub.1032762739
    121 https://doi.org/10.1007/bf00353196
    122 rdf:type schema:CreativeWork
    123 sg:pub.10.1007/bf02647837 schema:sameAs https://app.dimensions.ai/details/publication/pub.1037799733
    124 https://doi.org/10.1007/bf02647837
    125 rdf:type schema:CreativeWork
    126 sg:pub.10.1007/bf02652472 schema:sameAs https://app.dimensions.ai/details/publication/pub.1012295633
    127 https://doi.org/10.1007/bf02652472
    128 rdf:type schema:CreativeWork
    129 sg:pub.10.1007/bf02653975 schema:sameAs https://app.dimensions.ai/details/publication/pub.1015466554
    130 https://doi.org/10.1007/bf02653975
    131 rdf:type schema:CreativeWork
    132 sg:pub.10.1007/bf02655091 schema:sameAs https://app.dimensions.ai/details/publication/pub.1046904813
    133 https://doi.org/10.1007/bf02655091
    134 rdf:type schema:CreativeWork
    135 sg:pub.10.1007/bf02656823 schema:sameAs https://app.dimensions.ai/details/publication/pub.1038218357
    136 https://doi.org/10.1007/bf02656823
    137 rdf:type schema:CreativeWork
    138 sg:pub.10.1007/bf02661076 schema:sameAs https://app.dimensions.ai/details/publication/pub.1041939838
    139 https://doi.org/10.1007/bf02661076
    140 rdf:type schema:CreativeWork
    141 sg:pub.10.1007/bf02670181 schema:sameAs https://app.dimensions.ai/details/publication/pub.1005864147
    142 https://doi.org/10.1007/bf02670181
    143 rdf:type schema:CreativeWork
    144 sg:pub.10.1007/bf02674755 schema:sameAs https://app.dimensions.ai/details/publication/pub.1005966315
    145 https://doi.org/10.1007/bf02674755
    146 rdf:type schema:CreativeWork
    147 sg:pub.10.1007/bf02696935 schema:sameAs https://app.dimensions.ai/details/publication/pub.1005544842
    148 https://doi.org/10.1007/bf02696935
    149 rdf:type schema:CreativeWork
    150 sg:pub.10.1007/bf03350964 schema:sameAs https://app.dimensions.ai/details/publication/pub.1029792246
    151 https://doi.org/10.1007/bf03350964
    152 rdf:type schema:CreativeWork
    153 grid-institutes:grid.24827.3b schema:alternateName Department of Materials Science and Engineering, University of Cincinnati, 45221-0012, Cincinnati, OH, USA
    154 schema:name Department of Materials Science and Engineering, University of Cincinnati, 45221-0012, Cincinnati, OH, USA
    155 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...