1994-03
AUTHORS ABSTRACTHardening of Ti-6Al-4V alloy with laser surface melting (LSM) and laser surface alloying (LSA) techniques was attempted. Both LSM and LSA were carried out in a nitrogeneous atmosphere. Niobium, molybdenum and zirconium were used as alloying elements in the LSA. A hardness increase was observed for both LSM and LSA. Maximum hardness was obtained for LSM and zirconium alloy addition. In LSM, hardness increased almost three-fold in comparison to the substrate, which has a Vickers hardness of 350, by the formation of TiN in the region of 100 Μm melt depth. Hardness then decreased slowly and reached a minimum of 580 VHN at the maximum melt depth of 750 Μm. However, hardness for the zirconium alloy addition was uniform throughout the melted zone. Ageing treatments were performed for all specimens at 450‡C and different ageing times. Hardness measurements and X-ray diffraction were utilized to delineate the features associated with the hardening of the melted zone. More... »
PAGES1159-1168
http://scigraph.springernature.com/pub.10.1007/bf00975058
DOIhttp://dx.doi.org/10.1007/bf00975058
DIMENSIONShttps://app.dimensions.ai/details/publication/pub.1040563615
JSON-LD is the canonical representation for SciGraph data.
TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT
[
{
"@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json",
"about": [
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Materials Engineering",
"type": "DefinedTerm"
},
{
"id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09",
"inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/",
"name": "Engineering",
"type": "DefinedTerm"
}
],
"author": [
{
"affiliation": {
"alternateName": "New Mexico Institute of Mining and Technology",
"id": "https://www.grid.ac/institutes/grid.39679.32",
"name": [
"Department of Materials and Metallurgical Engineering, New Mexico Institute of Mining and Technology, 87801, Socorro, NM, USA"
],
"type": "Organization"
},
"familyName": "Akgun",
"givenName": "O. V.",
"id": "sg:person.012455305457.53",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012455305457.53"
],
"type": "Person"
},
{
"affiliation": {
"alternateName": "New Mexico Institute of Mining and Technology",
"id": "https://www.grid.ac/institutes/grid.39679.32",
"name": [
"Department of Materials and Metallurgical Engineering, New Mexico Institute of Mining and Technology, 87801, Socorro, NM, USA"
],
"type": "Organization"
},
"familyName": "Inal",
"givenName": "O. T.",
"id": "sg:person.014050246457.04",
"sameAs": [
"https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014050246457.04"
],
"type": "Person"
}
],
"citation": [
{
"id": "https://doi.org/10.1016/0036-9748(89)90106-3",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1009179324"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0036-9748(89)90106-3",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1009179324"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0040-6090(83)90504-7",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1011687934"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0040-6090(83)90504-7",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1011687934"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0079-6425(81)90001-3",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1016435386"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0079-6425(81)90001-3",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1016435386"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/b978-0-08-006564-9.50073-7",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1025228715"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0001-6160(73)90093-x",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1027847687"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0001-6160(73)90093-x",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1027847687"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0001-6160(74)90014-5",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1030830669"
],
"type": "CreativeWork"
},
{
"id": "https://doi.org/10.1016/0001-6160(74)90014-5",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1030830669"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/bf03377678",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1045649026",
"https://doi.org/10.1007/bf03377678"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/bf03377678",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1045649026",
"https://doi.org/10.1007/bf03377678"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/bf02663213",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1049107257",
"https://doi.org/10.1007/bf02663213"
],
"type": "CreativeWork"
},
{
"id": "sg:pub.10.1007/bf02663213",
"sameAs": [
"https://app.dimensions.ai/details/publication/pub.1049107257",
"https://doi.org/10.1007/bf02663213"
],
"type": "CreativeWork"
}
],
"datePublished": "1994-03",
"datePublishedReg": "1994-03-01",
"description": "Hardening of Ti-6Al-4V alloy with laser surface melting (LSM) and laser surface alloying (LSA) techniques was attempted. Both LSM and LSA were carried out in a nitrogeneous atmosphere. Niobium, molybdenum and zirconium were used as alloying elements in the LSA. A hardness increase was observed for both LSM and LSA. Maximum hardness was obtained for LSM and zirconium alloy addition. In LSM, hardness increased almost three-fold in comparison to the substrate, which has a Vickers hardness of 350, by the formation of TiN in the region of 100 \u039cm melt depth. Hardness then decreased slowly and reached a minimum of 580 VHN at the maximum melt depth of 750 \u039cm. However, hardness for the zirconium alloy addition was uniform throughout the melted zone. Ageing treatments were performed for all specimens at 450\u2021C and different ageing times. Hardness measurements and X-ray diffraction were utilized to delineate the features associated with the hardening of the melted zone.",
"genre": "research_article",
"id": "sg:pub.10.1007/bf00975058",
"inLanguage": [
"en"
],
"isAccessibleForFree": false,
"isPartOf": [
{
"id": "sg:journal.1312116",
"issn": [
"0022-2461",
"1573-4811"
],
"name": "Journal of Materials Science",
"type": "Periodical"
},
{
"issueNumber": "5",
"type": "PublicationIssue"
},
{
"type": "PublicationVolume",
"volumeNumber": "29"
}
],
"name": "Laser surface modification of Ti-6Al-4V alloy",
"pagination": "1159-1168",
"productId": [
{
"name": "readcube_id",
"type": "PropertyValue",
"value": [
"c13ae9c16d7e41f9cd2684e7d7be4247a64243d4dcf9a31ef4fc578873fdc95a"
]
},
{
"name": "doi",
"type": "PropertyValue",
"value": [
"10.1007/bf00975058"
]
},
{
"name": "dimensions_id",
"type": "PropertyValue",
"value": [
"pub.1040563615"
]
}
],
"sameAs": [
"https://doi.org/10.1007/bf00975058",
"https://app.dimensions.ai/details/publication/pub.1040563615"
],
"sdDataset": "articles",
"sdDatePublished": "2019-04-10T18:17",
"sdLicense": "https://scigraph.springernature.com/explorer/license/",
"sdPublisher": {
"name": "Springer Nature - SN SciGraph project",
"type": "Organization"
},
"sdSource": "s3://com-uberresearch-data-dimensions-target-20181106-alternative/cleanup/v134/2549eaecd7973599484d7c17b260dba0a4ecb94b/merge/v9/a6c9fde33151104705d4d7ff012ea9563521a3ce/jats-lookup/v90/0000000001_0000000264/records_8675_00000496.jsonl",
"type": "ScholarlyArticle",
"url": "http://link.springer.com/10.1007/BF00975058"
}
]
Download the RDF metadata as: json-ld nt turtle xml License info
JSON-LD is a popular format for linked data which is fully compatible with JSON.
curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/bf00975058'
N-Triples is a line-based linked data format ideal for batch operations.
curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/bf00975058'
Turtle is a human-readable linked data format.
curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/bf00975058'
RDF/XML is a standard XML format for linked data.
curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/bf00975058'
This table displays all metadata directly associated to this object as RDF triples.
94 TRIPLES
21 PREDICATES
35 URIs
19 LITERALS
7 BLANK NODES