Effects of re-pressing under high hydrostatic pressure upon the shrinkage and density of sintered VK6 hard alloy blanks View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

1975-05

AUTHORS

V. P. Bondarenko, A. P. Khalepa, A. A. Baidenko, S. S. Dzhamarov, Yu. I. Chernyi, G. P. Mikhailenko

ABSTRACT

ConclusionsHydrostatic re-pressing of preformed blanks can be employed as a means of producing parts of the required shape and size only in those cases where the density of the blanks is evenly distributed through-out their volume. When the distribution of density in the starting blanks is uneven, re-pressing will alter their relative dimensions and change their shape. To obtain parts of the required shape and size from blanks with an uneven distribution of starting porosity, recourse must be had after re-pressing, as in the case of parts produced by ordinary hydrostatic pressing, to machining.The chief advantages of re-pressing under high hydrostatic pressure are a low value of coefficient of shrinkage after final sintering and reduced distortion of parts.The density of alloy specimens, as determined by hydrostatic weighing, is virtually unaffected by re-pressing.The number of large pores substantially decreases as a result of repressing only in specimens presintered at 650°C; with other types of pretreatment, the effect of pre-pressing on the number of large pores is less marked. The least number of pores is found in specimens produced by hydrostatic pressing without a plasticizer. More... »

PAGES

358-362

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/bf00807803

DOI

http://dx.doi.org/10.1007/bf00807803

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1035904138


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Materials Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "Institute of Superhard Materials, Donetsk Physicotechnical Institute, USSR", 
          "id": "http://www.grid.ac/institutes/grid.438873.3", 
          "name": [
            "Institute of Superhard Materials, Donetsk Physicotechnical Institute, USSR"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Bondarenko", 
        "givenName": "V. P.", 
        "id": "sg:person.012116536155.10", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012116536155.10"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Institute of Superhard Materials, Donetsk Physicotechnical Institute, USSR", 
          "id": "http://www.grid.ac/institutes/grid.438873.3", 
          "name": [
            "Institute of Superhard Materials, Donetsk Physicotechnical Institute, USSR"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Khalepa", 
        "givenName": "A. P.", 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Institute of Superhard Materials, Donetsk Physicotechnical Institute, USSR", 
          "id": "http://www.grid.ac/institutes/grid.438873.3", 
          "name": [
            "Institute of Superhard Materials, Donetsk Physicotechnical Institute, USSR"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Baidenko", 
        "givenName": "A. A.", 
        "id": "sg:person.014017545777.82", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014017545777.82"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Institute of Superhard Materials, Donetsk Physicotechnical Institute, USSR", 
          "id": "http://www.grid.ac/institutes/grid.438873.3", 
          "name": [
            "Institute of Superhard Materials, Donetsk Physicotechnical Institute, USSR"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Dzhamarov", 
        "givenName": "S. S.", 
        "id": "sg:person.012733272155.80", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012733272155.80"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Institute of Superhard Materials, Donetsk Physicotechnical Institute, USSR", 
          "id": "http://www.grid.ac/institutes/grid.438873.3", 
          "name": [
            "Institute of Superhard Materials, Donetsk Physicotechnical Institute, USSR"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Chernyi", 
        "givenName": "Yu. I.", 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "Institute of Superhard Materials, Donetsk Physicotechnical Institute, USSR", 
          "id": "http://www.grid.ac/institutes/grid.438873.3", 
          "name": [
            "Institute of Superhard Materials, Donetsk Physicotechnical Institute, USSR"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Mikhailenko", 
        "givenName": "G. P.", 
        "id": "sg:person.07366534613.91", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07366534613.91"
        ], 
        "type": "Person"
      }
    ], 
    "datePublished": "1975-05", 
    "datePublishedReg": "1975-05-01", 
    "description": "ConclusionsHydrostatic re-pressing of preformed blanks can be employed as a means of producing parts of the required shape and size only in those cases where the density of the blanks is evenly distributed through-out their volume. When the distribution of density in the starting blanks is uneven, re-pressing will alter their relative dimensions and change their shape. To obtain parts of the required shape and size from blanks with an uneven distribution of starting porosity, recourse must be had after re-pressing, as in the case of parts produced by ordinary hydrostatic pressing, to machining.The chief advantages of re-pressing under high hydrostatic pressure are a low value of coefficient of shrinkage after final sintering and reduced distortion of parts.The density of alloy specimens, as determined by hydrostatic weighing, is virtually unaffected by re-pressing.The number of large pores substantially decreases as a result of repressing only in specimens presintered at 650\u00b0C; with other types of pretreatment, the effect of pre-pressing on the number of large pores is less marked. The least number of pores is found in specimens produced by hydrostatic pressing without a plasticizer.", 
    "genre": "article", 
    "id": "sg:pub.10.1007/bf00807803", 
    "inLanguage": "en", 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1313787", 
        "issn": [
          "0032-4795", 
          "1068-1302"
        ], 
        "name": "Powder Metallurgy and Metal Ceramics", 
        "publisher": "Springer Nature", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "5", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "14"
      }
    ], 
    "keywords": [
      "large pores", 
      "hydrostatic pressing", 
      "alloy specimens", 
      "final sintering", 
      "case of parts", 
      "high hydrostatic pressure", 
      "reduced distortion", 
      "distribution of density", 
      "hydrostatic pressure", 
      "pores", 
      "blanks", 
      "shrinkage", 
      "type of pretreatment", 
      "pressing", 
      "sintering", 
      "density", 
      "relative dimensions", 
      "VK6", 
      "porosity", 
      "shape", 
      "chief advantage", 
      "uneven distribution", 
      "lower values", 
      "specimens", 
      "plasticizer", 
      "pressure", 
      "hydrostatic", 
      "size", 
      "distribution", 
      "coefficient", 
      "advantages", 
      "distortion", 
      "part", 
      "effect", 
      "volume", 
      "results", 
      "means", 
      "dimensions", 
      "values", 
      "number", 
      "cases", 
      "hydrostatic weighing", 
      "types", 
      "least number", 
      "weighing", 
      "pretreatment", 
      "recourse", 
      "ConclusionsHydrostatic", 
      "starting blanks", 
      "ordinary hydrostatic pressing", 
      "sintered VK6", 
      "alloy blanks"
    ], 
    "name": "Effects of re-pressing under high hydrostatic pressure upon the shrinkage and density of sintered VK6 hard alloy blanks", 
    "pagination": "358-362", 
    "productId": [
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1035904138"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/bf00807803"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/bf00807803", 
      "https://app.dimensions.ai/details/publication/pub.1035904138"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2021-12-01T19:02", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-springernature-scigraph/baseset/20211201/entities/gbq_results/article/article_128.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "https://doi.org/10.1007/bf00807803"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/bf00807803'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/bf00807803'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/bf00807803'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/bf00807803'


 

This table displays all metadata directly associated to this object as RDF triples.

143 TRIPLES      21 PREDICATES      78 URIs      70 LITERALS      6 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/bf00807803 schema:about anzsrc-for:09
2 anzsrc-for:0912
3 schema:author Ne4f2734b819a488c886b21859134c5f6
4 schema:datePublished 1975-05
5 schema:datePublishedReg 1975-05-01
6 schema:description ConclusionsHydrostatic re-pressing of preformed blanks can be employed as a means of producing parts of the required shape and size only in those cases where the density of the blanks is evenly distributed through-out their volume. When the distribution of density in the starting blanks is uneven, re-pressing will alter their relative dimensions and change their shape. To obtain parts of the required shape and size from blanks with an uneven distribution of starting porosity, recourse must be had after re-pressing, as in the case of parts produced by ordinary hydrostatic pressing, to machining.The chief advantages of re-pressing under high hydrostatic pressure are a low value of coefficient of shrinkage after final sintering and reduced distortion of parts.The density of alloy specimens, as determined by hydrostatic weighing, is virtually unaffected by re-pressing.The number of large pores substantially decreases as a result of repressing only in specimens presintered at 650°C; with other types of pretreatment, the effect of pre-pressing on the number of large pores is less marked. The least number of pores is found in specimens produced by hydrostatic pressing without a plasticizer.
7 schema:genre article
8 schema:inLanguage en
9 schema:isAccessibleForFree false
10 schema:isPartOf Na6fba5368475449eb10caf93a33f5316
11 Nba6ed8444311435889c354a2c1739f59
12 sg:journal.1313787
13 schema:keywords ConclusionsHydrostatic
14 VK6
15 advantages
16 alloy blanks
17 alloy specimens
18 blanks
19 case of parts
20 cases
21 chief advantage
22 coefficient
23 density
24 dimensions
25 distortion
26 distribution
27 distribution of density
28 effect
29 final sintering
30 high hydrostatic pressure
31 hydrostatic
32 hydrostatic pressing
33 hydrostatic pressure
34 hydrostatic weighing
35 large pores
36 least number
37 lower values
38 means
39 number
40 ordinary hydrostatic pressing
41 part
42 plasticizer
43 pores
44 porosity
45 pressing
46 pressure
47 pretreatment
48 recourse
49 reduced distortion
50 relative dimensions
51 results
52 shape
53 shrinkage
54 sintered VK6
55 sintering
56 size
57 specimens
58 starting blanks
59 type of pretreatment
60 types
61 uneven distribution
62 values
63 volume
64 weighing
65 schema:name Effects of re-pressing under high hydrostatic pressure upon the shrinkage and density of sintered VK6 hard alloy blanks
66 schema:pagination 358-362
67 schema:productId N0815bb05772b44efbdba2dc0961e5844
68 Na8df4741f2ae4bc88b423b4dc059732c
69 schema:sameAs https://app.dimensions.ai/details/publication/pub.1035904138
70 https://doi.org/10.1007/bf00807803
71 schema:sdDatePublished 2021-12-01T19:02
72 schema:sdLicense https://scigraph.springernature.com/explorer/license/
73 schema:sdPublisher Ndc69e9f59b6e447d99972f37a9773685
74 schema:url https://doi.org/10.1007/bf00807803
75 sgo:license sg:explorer/license/
76 sgo:sdDataset articles
77 rdf:type schema:ScholarlyArticle
78 N025037a5abc542929b41211e5ab264e0 rdf:first sg:person.07366534613.91
79 rdf:rest rdf:nil
80 N0815bb05772b44efbdba2dc0961e5844 schema:name dimensions_id
81 schema:value pub.1035904138
82 rdf:type schema:PropertyValue
83 N38828692f1764f659bdbc84b95f4f0ce schema:affiliation grid-institutes:grid.438873.3
84 schema:familyName Khalepa
85 schema:givenName A. P.
86 rdf:type schema:Person
87 N6ac1fd9202a04c159de56b2ba35caca0 rdf:first sg:person.012733272155.80
88 rdf:rest Nd452377126a14d12b8be7a249213414d
89 N6cad3c021a324eabb362ecd921d66dcc schema:affiliation grid-institutes:grid.438873.3
90 schema:familyName Chernyi
91 schema:givenName Yu. I.
92 rdf:type schema:Person
93 Na6fba5368475449eb10caf93a33f5316 schema:volumeNumber 14
94 rdf:type schema:PublicationVolume
95 Na8df4741f2ae4bc88b423b4dc059732c schema:name doi
96 schema:value 10.1007/bf00807803
97 rdf:type schema:PropertyValue
98 Naa256727b8d94fada34e1921a501cbdb rdf:first sg:person.014017545777.82
99 rdf:rest N6ac1fd9202a04c159de56b2ba35caca0
100 Nba6ed8444311435889c354a2c1739f59 schema:issueNumber 5
101 rdf:type schema:PublicationIssue
102 Nbecd36b2e3054a61b846e34f9867b7e6 rdf:first N38828692f1764f659bdbc84b95f4f0ce
103 rdf:rest Naa256727b8d94fada34e1921a501cbdb
104 Nd452377126a14d12b8be7a249213414d rdf:first N6cad3c021a324eabb362ecd921d66dcc
105 rdf:rest N025037a5abc542929b41211e5ab264e0
106 Ndc69e9f59b6e447d99972f37a9773685 schema:name Springer Nature - SN SciGraph project
107 rdf:type schema:Organization
108 Ne4f2734b819a488c886b21859134c5f6 rdf:first sg:person.012116536155.10
109 rdf:rest Nbecd36b2e3054a61b846e34f9867b7e6
110 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
111 schema:name Engineering
112 rdf:type schema:DefinedTerm
113 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
114 schema:name Materials Engineering
115 rdf:type schema:DefinedTerm
116 sg:journal.1313787 schema:issn 0032-4795
117 1068-1302
118 schema:name Powder Metallurgy and Metal Ceramics
119 schema:publisher Springer Nature
120 rdf:type schema:Periodical
121 sg:person.012116536155.10 schema:affiliation grid-institutes:grid.438873.3
122 schema:familyName Bondarenko
123 schema:givenName V. P.
124 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012116536155.10
125 rdf:type schema:Person
126 sg:person.012733272155.80 schema:affiliation grid-institutes:grid.438873.3
127 schema:familyName Dzhamarov
128 schema:givenName S. S.
129 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012733272155.80
130 rdf:type schema:Person
131 sg:person.014017545777.82 schema:affiliation grid-institutes:grid.438873.3
132 schema:familyName Baidenko
133 schema:givenName A. A.
134 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014017545777.82
135 rdf:type schema:Person
136 sg:person.07366534613.91 schema:affiliation grid-institutes:grid.438873.3
137 schema:familyName Mikhailenko
138 schema:givenName G. P.
139 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07366534613.91
140 rdf:type schema:Person
141 grid-institutes:grid.438873.3 schema:alternateName Institute of Superhard Materials, Donetsk Physicotechnical Institute, USSR
142 schema:name Institute of Superhard Materials, Donetsk Physicotechnical Institute, USSR
143 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...