The deformation resistance and stability of strain distortions of sintered alloys View Full Text


Ontology type: schema:ScholarlyArticle     


Article Info

DATE

1965-09

AUTHORS

V. V. Grigor'eva, K. V. Savitskii, V. N. Zhdanova, V. A. Kulikov, V. M. Sergeenkova, A. P. Savitskii, V. I. Itin, Yu. I. Kozlov

ABSTRACT

In tests at room temperature, the deformation resistance of sintered alloys of nickel with up to 5% aluminum oxide, prepared by high-temperature sintering, differs only slightly from that of sintered nickel. It shows a certain increase with increasing oxide concentration, as well as when α-Al2O3 is used instead ofγ-Al2O3.At this temperature, the superiority of sintered nickel-aluminum oxide alloys over sintered nickel is more pronounced at small degrees of deformation.As test temperature is raised, the difference in the deformation resistance of nickel with and without aluminum oxide additions becomes greater. At a test temperature of 500°C, the part played by the particle size of the oxide in alloy strengthening sharply increases; the influence of the oxide modification becomes even stronger.The hardness of sintered Ni-A12O3 alloys after deformation and high-temperature annealing remains higher than that of oxide-free nickel subjected to the same treatment. At the same time, the hardness level rises with increasing concentration and decreasing particle size of the oxide.The maximum hardness loss temperature is the same for sintered alloys containingγ-Al2O3 as for sintered nickel, but rises when α-Al2O3 is added to nickel.Sintered alloys of nickel with the α-modification of aluminum oxide are superior both in respect to deformation resistance at room and elevated tempe ratures, and temperature stability of strain distortions. More... »

PAGES

758-764

Identifiers

URI

http://scigraph.springernature.com/pub.10.1007/bf00774227

DOI

http://dx.doi.org/10.1007/bf00774227

DIMENSIONS

https://app.dimensions.ai/details/publication/pub.1021797330


Indexing Status Check whether this publication has been indexed by Scopus and Web Of Science using the SN Indexing Status Tool
Incoming Citations Browse incoming citations for this publication using opencitations.net

JSON-LD is the canonical representation for SciGraph data.

TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

[
  {
    "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
    "about": [
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/09", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Engineering", 
        "type": "DefinedTerm"
      }, 
      {
        "id": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/0912", 
        "inDefinedTermSet": "http://purl.org/au-research/vocabulary/anzsrc-for/2008/", 
        "name": "Materials Engineering", 
        "type": "DefinedTerm"
      }
    ], 
    "author": [
      {
        "affiliation": {
          "alternateName": "V. D. Kuznetsov Siberian Physicotechnical Institute, USSR", 
          "id": "http://www.grid.ac/institutes/grid.77602.34", 
          "name": [
            "Institute of Materials Problems, Academy of Sciences, Ukr SSR", 
            "V. D. Kuznetsov Siberian Physicotechnical Institute, USSR"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Grigor'eva", 
        "givenName": "V. V.", 
        "id": "sg:person.014217620624.46", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014217620624.46"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "V. D. Kuznetsov Siberian Physicotechnical Institute, USSR", 
          "id": "http://www.grid.ac/institutes/grid.77602.34", 
          "name": [
            "Institute of Materials Problems, Academy of Sciences, Ukr SSR", 
            "V. D. Kuznetsov Siberian Physicotechnical Institute, USSR"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Savitskii", 
        "givenName": "K. V.", 
        "id": "sg:person.013446711732.13", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013446711732.13"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "V. D. Kuznetsov Siberian Physicotechnical Institute, USSR", 
          "id": "http://www.grid.ac/institutes/grid.77602.34", 
          "name": [
            "Institute of Materials Problems, Academy of Sciences, Ukr SSR", 
            "V. D. Kuznetsov Siberian Physicotechnical Institute, USSR"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Zhdanova", 
        "givenName": "V. N.", 
        "id": "sg:person.016075646002.31", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016075646002.31"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "V. D. Kuznetsov Siberian Physicotechnical Institute, USSR", 
          "id": "http://www.grid.ac/institutes/grid.77602.34", 
          "name": [
            "Institute of Materials Problems, Academy of Sciences, Ukr SSR", 
            "V. D. Kuznetsov Siberian Physicotechnical Institute, USSR"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Kulikov", 
        "givenName": "V. A.", 
        "id": "sg:person.016342027024.77", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016342027024.77"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "V. D. Kuznetsov Siberian Physicotechnical Institute, USSR", 
          "id": "http://www.grid.ac/institutes/grid.77602.34", 
          "name": [
            "Institute of Materials Problems, Academy of Sciences, Ukr SSR", 
            "V. D. Kuznetsov Siberian Physicotechnical Institute, USSR"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Sergeenkova", 
        "givenName": "V. M.", 
        "id": "sg:person.015373075265.25", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015373075265.25"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "V. D. Kuznetsov Siberian Physicotechnical Institute, USSR", 
          "id": "http://www.grid.ac/institutes/grid.77602.34", 
          "name": [
            "Institute of Materials Problems, Academy of Sciences, Ukr SSR", 
            "V. D. Kuznetsov Siberian Physicotechnical Institute, USSR"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Savitskii", 
        "givenName": "A. P.", 
        "id": "sg:person.013277447465.87", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013277447465.87"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "V. D. Kuznetsov Siberian Physicotechnical Institute, USSR", 
          "id": "http://www.grid.ac/institutes/grid.77602.34", 
          "name": [
            "Institute of Materials Problems, Academy of Sciences, Ukr SSR", 
            "V. D. Kuznetsov Siberian Physicotechnical Institute, USSR"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Itin", 
        "givenName": "V. I.", 
        "id": "sg:person.01332227051.19", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01332227051.19"
        ], 
        "type": "Person"
      }, 
      {
        "affiliation": {
          "alternateName": "V. D. Kuznetsov Siberian Physicotechnical Institute, USSR", 
          "id": "http://www.grid.ac/institutes/grid.77602.34", 
          "name": [
            "Institute of Materials Problems, Academy of Sciences, Ukr SSR", 
            "V. D. Kuznetsov Siberian Physicotechnical Institute, USSR"
          ], 
          "type": "Organization"
        }, 
        "familyName": "Kozlov", 
        "givenName": "Yu. I.", 
        "id": "sg:person.011704767745.03", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011704767745.03"
        ], 
        "type": "Person"
      }
    ], 
    "datePublished": "1965-09", 
    "datePublishedReg": "1965-09-01", 
    "description": "In tests at room temperature, the deformation resistance of sintered alloys of nickel with up to 5% aluminum oxide, prepared by high-temperature sintering, differs only slightly from that of sintered nickel. It shows a certain increase with increasing oxide concentration, as well as when \u03b1-Al2O3 is used instead of\u03b3-Al2O3.At this temperature, the superiority of sintered nickel-aluminum oxide alloys over sintered nickel is more pronounced at small degrees of deformation.As test temperature is raised, the difference in the deformation resistance of nickel with and without aluminum oxide additions becomes greater. At a test temperature of 500\u00b0C, the part played by the particle size of the oxide in alloy strengthening sharply increases; the influence of the oxide modification becomes even stronger.The hardness of sintered Ni-A12O3 alloys after deformation and high-temperature annealing remains higher than that of oxide-free nickel subjected to the same treatment. At the same time, the hardness level rises with increasing concentration and decreasing particle size of the oxide.The maximum hardness loss temperature is the same for sintered alloys containing\u03b3-Al2O3 as for sintered nickel, but rises when \u03b1-Al2O3 is added to nickel.Sintered alloys of nickel with the \u03b1-modification of aluminum oxide are superior both in respect to deformation resistance at room and elevated tempe ratures, and temperature stability of strain distortions.", 
    "genre": "article", 
    "id": "sg:pub.10.1007/bf00774227", 
    "inLanguage": "en", 
    "isAccessibleForFree": false, 
    "isPartOf": [
      {
        "id": "sg:journal.1313787", 
        "issn": [
          "0032-4795", 
          "1068-1302"
        ], 
        "name": "Powder Metallurgy and Metal Ceramics", 
        "publisher": "Springer Nature", 
        "type": "Periodical"
      }, 
      {
        "issueNumber": "9", 
        "type": "PublicationIssue"
      }, 
      {
        "type": "PublicationVolume", 
        "volumeNumber": "4"
      }
    ], 
    "keywords": [
      "deformation resistance", 
      "alloys of nickel", 
      "test temperature", 
      "aluminum oxide", 
      "high-temperature sintering", 
      "high-temperature annealing", 
      "particle size", 
      "aluminum oxide additions", 
      "oxide addition", 
      "hardness levels", 
      "alloy", 
      "oxide modification", 
      "strain distortion", 
      "temperature stability", 
      "nickel", 
      "deformation", 
      "oxide", 
      "room temperature", 
      "temperature", 
      "loss temperatures", 
      "Al2O3", 
      "sintering", 
      "certain increase", 
      "hardness", 
      "resistance", 
      "oxide concentration", 
      "stability", 
      "annealing", 
      "distortion", 
      "size", 
      "same time", 
      "of\u03b3", 
      "modification", 
      "influence", 
      "concentration", 
      "test", 
      "rature", 
      "small degree", 
      "superiority", 
      "increase", 
      "respect", 
      "addition", 
      "time", 
      "room", 
      "part", 
      "degree", 
      "differences", 
      "treatment", 
      "levels", 
      "same treatment", 
      "nickel-aluminum oxide", 
      "Ni-A12O3", 
      "oxide-free nickel", 
      "maximum hardness loss temperature", 
      "hardness loss temperature", 
      "sintered alloys containing\u03b3-Al2O3", 
      "alloys containing\u03b3-Al2O3", 
      "containing\u03b3-Al2O3", 
      "elevated tempe ratures", 
      "tempe ratures"
    ], 
    "name": "The deformation resistance and stability of strain distortions of sintered alloys", 
    "pagination": "758-764", 
    "productId": [
      {
        "name": "dimensions_id", 
        "type": "PropertyValue", 
        "value": [
          "pub.1021797330"
        ]
      }, 
      {
        "name": "doi", 
        "type": "PropertyValue", 
        "value": [
          "10.1007/bf00774227"
        ]
      }
    ], 
    "sameAs": [
      "https://doi.org/10.1007/bf00774227", 
      "https://app.dimensions.ai/details/publication/pub.1021797330"
    ], 
    "sdDataset": "articles", 
    "sdDatePublished": "2021-12-01T19:01", 
    "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
    "sdPublisher": {
      "name": "Springer Nature - SN SciGraph project", 
      "type": "Organization"
    }, 
    "sdSource": "s3://com-springernature-scigraph/baseset/20211201/entities/gbq_results/article/article_100.jsonl", 
    "type": "ScholarlyArticle", 
    "url": "https://doi.org/10.1007/bf00774227"
  }
]
 

Download the RDF metadata as:  json-ld nt turtle xml License info

HOW TO GET THIS DATA PROGRAMMATICALLY:

JSON-LD is a popular format for linked data which is fully compatible with JSON.

curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/pub.10.1007/bf00774227'

N-Triples is a line-based linked data format ideal for batch operations.

curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/pub.10.1007/bf00774227'

Turtle is a human-readable linked data format.

curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/pub.10.1007/bf00774227'

RDF/XML is a standard XML format for linked data.

curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/pub.10.1007/bf00774227'


 

This table displays all metadata directly associated to this object as RDF triples.

168 TRIPLES      21 PREDICATES      86 URIs      78 LITERALS      6 BLANK NODES

Subject Predicate Object
1 sg:pub.10.1007/bf00774227 schema:about anzsrc-for:09
2 anzsrc-for:0912
3 schema:author N9ad88e4170ef404d9f6f03aa768022f1
4 schema:datePublished 1965-09
5 schema:datePublishedReg 1965-09-01
6 schema:description In tests at room temperature, the deformation resistance of sintered alloys of nickel with up to 5% aluminum oxide, prepared by high-temperature sintering, differs only slightly from that of sintered nickel. It shows a certain increase with increasing oxide concentration, as well as when α-Al2O3 is used instead ofγ-Al2O3.At this temperature, the superiority of sintered nickel-aluminum oxide alloys over sintered nickel is more pronounced at small degrees of deformation.As test temperature is raised, the difference in the deformation resistance of nickel with and without aluminum oxide additions becomes greater. At a test temperature of 500°C, the part played by the particle size of the oxide in alloy strengthening sharply increases; the influence of the oxide modification becomes even stronger.The hardness of sintered Ni-A12O3 alloys after deformation and high-temperature annealing remains higher than that of oxide-free nickel subjected to the same treatment. At the same time, the hardness level rises with increasing concentration and decreasing particle size of the oxide.The maximum hardness loss temperature is the same for sintered alloys containingγ-Al2O3 as for sintered nickel, but rises when α-Al2O3 is added to nickel.Sintered alloys of nickel with the α-modification of aluminum oxide are superior both in respect to deformation resistance at room and elevated tempe ratures, and temperature stability of strain distortions.
7 schema:genre article
8 schema:inLanguage en
9 schema:isAccessibleForFree false
10 schema:isPartOf N533113ee347e48fc8e04e317872bafa3
11 Ne64dace2eee24685b01a9ba4874b6d9e
12 sg:journal.1313787
13 schema:keywords Al2O3
14 Ni-A12O3
15 addition
16 alloy
17 alloys containingγ-Al2O3
18 alloys of nickel
19 aluminum oxide
20 aluminum oxide additions
21 annealing
22 certain increase
23 concentration
24 containingγ-Al2O3
25 deformation
26 deformation resistance
27 degree
28 differences
29 distortion
30 elevated tempe ratures
31 hardness
32 hardness levels
33 hardness loss temperature
34 high-temperature annealing
35 high-temperature sintering
36 increase
37 influence
38 levels
39 loss temperatures
40 maximum hardness loss temperature
41 modification
42 nickel
43 nickel-aluminum oxide
44 ofγ
45 oxide
46 oxide addition
47 oxide concentration
48 oxide modification
49 oxide-free nickel
50 part
51 particle size
52 rature
53 resistance
54 respect
55 room
56 room temperature
57 same time
58 same treatment
59 sintered alloys containingγ-Al2O3
60 sintering
61 size
62 small degree
63 stability
64 strain distortion
65 superiority
66 tempe ratures
67 temperature
68 temperature stability
69 test
70 test temperature
71 time
72 treatment
73 schema:name The deformation resistance and stability of strain distortions of sintered alloys
74 schema:pagination 758-764
75 schema:productId N5e238641f45c4129a021642c4dcfcea2
76 N74741c7c47f74012ada535605c6bd3b2
77 schema:sameAs https://app.dimensions.ai/details/publication/pub.1021797330
78 https://doi.org/10.1007/bf00774227
79 schema:sdDatePublished 2021-12-01T19:01
80 schema:sdLicense https://scigraph.springernature.com/explorer/license/
81 schema:sdPublisher N91024870fc8a4860b86fb3060971ee8e
82 schema:url https://doi.org/10.1007/bf00774227
83 sgo:license sg:explorer/license/
84 sgo:sdDataset articles
85 rdf:type schema:ScholarlyArticle
86 N037e0f083c114423afdc59bec06d93ed rdf:first sg:person.011704767745.03
87 rdf:rest rdf:nil
88 N2ab46fbd1bf141aa80c475c8431a2a69 rdf:first sg:person.01332227051.19
89 rdf:rest N037e0f083c114423afdc59bec06d93ed
90 N2afa0510c32d4805a8bbdd7b02725b2d rdf:first sg:person.013277447465.87
91 rdf:rest N2ab46fbd1bf141aa80c475c8431a2a69
92 N533113ee347e48fc8e04e317872bafa3 schema:issueNumber 9
93 rdf:type schema:PublicationIssue
94 N5e238641f45c4129a021642c4dcfcea2 schema:name doi
95 schema:value 10.1007/bf00774227
96 rdf:type schema:PropertyValue
97 N74741c7c47f74012ada535605c6bd3b2 schema:name dimensions_id
98 schema:value pub.1021797330
99 rdf:type schema:PropertyValue
100 N80b083139d8f4f68ac6049c591429216 rdf:first sg:person.015373075265.25
101 rdf:rest N2afa0510c32d4805a8bbdd7b02725b2d
102 N8c24bc9da7184c5f89011440b4b0d797 rdf:first sg:person.016075646002.31
103 rdf:rest Nd88cf5f4f7eb4dedb30a2194789a27ab
104 N91024870fc8a4860b86fb3060971ee8e schema:name Springer Nature - SN SciGraph project
105 rdf:type schema:Organization
106 N9ad88e4170ef404d9f6f03aa768022f1 rdf:first sg:person.014217620624.46
107 rdf:rest Nac2cc3c61d214b4c80ab16785c0ac0f6
108 Nac2cc3c61d214b4c80ab16785c0ac0f6 rdf:first sg:person.013446711732.13
109 rdf:rest N8c24bc9da7184c5f89011440b4b0d797
110 Nd88cf5f4f7eb4dedb30a2194789a27ab rdf:first sg:person.016342027024.77
111 rdf:rest N80b083139d8f4f68ac6049c591429216
112 Ne64dace2eee24685b01a9ba4874b6d9e schema:volumeNumber 4
113 rdf:type schema:PublicationVolume
114 anzsrc-for:09 schema:inDefinedTermSet anzsrc-for:
115 schema:name Engineering
116 rdf:type schema:DefinedTerm
117 anzsrc-for:0912 schema:inDefinedTermSet anzsrc-for:
118 schema:name Materials Engineering
119 rdf:type schema:DefinedTerm
120 sg:journal.1313787 schema:issn 0032-4795
121 1068-1302
122 schema:name Powder Metallurgy and Metal Ceramics
123 schema:publisher Springer Nature
124 rdf:type schema:Periodical
125 sg:person.011704767745.03 schema:affiliation grid-institutes:grid.77602.34
126 schema:familyName Kozlov
127 schema:givenName Yu. I.
128 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.011704767745.03
129 rdf:type schema:Person
130 sg:person.013277447465.87 schema:affiliation grid-institutes:grid.77602.34
131 schema:familyName Savitskii
132 schema:givenName A. P.
133 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013277447465.87
134 rdf:type schema:Person
135 sg:person.01332227051.19 schema:affiliation grid-institutes:grid.77602.34
136 schema:familyName Itin
137 schema:givenName V. I.
138 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.01332227051.19
139 rdf:type schema:Person
140 sg:person.013446711732.13 schema:affiliation grid-institutes:grid.77602.34
141 schema:familyName Savitskii
142 schema:givenName K. V.
143 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013446711732.13
144 rdf:type schema:Person
145 sg:person.014217620624.46 schema:affiliation grid-institutes:grid.77602.34
146 schema:familyName Grigor'eva
147 schema:givenName V. V.
148 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.014217620624.46
149 rdf:type schema:Person
150 sg:person.015373075265.25 schema:affiliation grid-institutes:grid.77602.34
151 schema:familyName Sergeenkova
152 schema:givenName V. M.
153 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.015373075265.25
154 rdf:type schema:Person
155 sg:person.016075646002.31 schema:affiliation grid-institutes:grid.77602.34
156 schema:familyName Zhdanova
157 schema:givenName V. N.
158 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016075646002.31
159 rdf:type schema:Person
160 sg:person.016342027024.77 schema:affiliation grid-institutes:grid.77602.34
161 schema:familyName Kulikov
162 schema:givenName V. A.
163 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016342027024.77
164 rdf:type schema:Person
165 grid-institutes:grid.77602.34 schema:alternateName V. D. Kuznetsov Siberian Physicotechnical Institute, USSR
166 schema:name Institute of Materials Problems, Academy of Sciences, Ukr SSR
167 V. D. Kuznetsov Siberian Physicotechnical Institute, USSR
168 rdf:type schema:Organization
 




Preview window. Press ESC to close (or click here)


...