C J Van Tyne


Ontology type: schema:Person     


Person Info

NAME

C J

SURNAME

Van Tyne

Publications in SciGraph latest 50 shown

  • 2019-01-18 Rapid Consolidation Mechanism of Titanium Aluminide Solid Compact via Electric Discharging Through Elemental Ti and Al Powder Mixture in METALS AND MATERIALS INTERNATIONAL
  • 2018-11-07 The bending dependency of forming limit diagrams in INTERNATIONAL JOURNAL OF MATERIAL FORMING
  • 2018-06 Effects of Testing Method on Stretch-Flangeability of Dual-Phase 980/1180 Steel Grades in JOM
  • 2016-08 Prediction of Forming Limit Curves from Hardness for Steels in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2016-03 Processing maps for the analysis of hot workability of microalloyed steels 38MnSiVS5 and 0.39C1.47Mn in JOURNAL OF MATERIALS SCIENCE
  • 2016 Contributions of Vanadium to Properties of Heat Treated Medium Carbon Forging Steels in HSLA STEELS 2015, MICROALLOYING 2015 & OFFSHORE ENGINEERING STEELS 2015
  • 2016-01 Correlation Between Crystal Structure Change and Transformation Strain for Multiphase Transformations in JOM
  • 2015-11 Addendum to: Uniform Elongation and the Stress-Strain Flow Curve of Steels Calculated from Hardness Using Empirical Correlations in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2015-01 Effect of Die Strength and Work Piece Strength on the Wear of Hot Forging Dies in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2014-10 Enhancing tube hydroformability by reducing the local strain gradient at potential necking sites in JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY
  • 2014-09 Influence of Temperature and Holding Time on the Interaction of V, Al, and N in Microalloyed Forging Steels in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2014-06 Uniform Elongation and the Stress-Strain Flow Curve of Steels Calculated from Hardness Using Empirical Correlations in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2013-09 Deformation analysis for cold rolling of Al-Cu double layered sheet by physical modeling and finite element method in METALS AND MATERIALS INTERNATIONAL
  • 2013-08 Effect of Microstructural Banding on the Fatigue Behavior of Induction-Hardened 4140 Steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2013-08 Failure during Sheared Edge Stretching of Dual-Phase Steels in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2013-06 Grain Size Dependence of Austenite Decomposition in Air-Cooled 16MnCr5 Steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2013-05 Characterization of deposited layer fabricated by direct laser melting process in METALS AND MATERIALS INTERNATIONAL
  • 2013-05 Reliability analysis of stainless steel/carbon steel double-layered tube on the basis of thermal deformation behavior in JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY
  • 2012-10 Effect of a Strain-Hardening Rate at Uniform Elongation on Sheared Edge Stretching in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2012-07 Review of the Shearing Process for Sheet Steels and Its Effect on Sheared-Edge Stretching in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2012-02 A Kinetics Model for Martensite Transformation in Plain Carbon and Low-Alloyed Steels in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2011-12 Effects of Copper on the Hardenability of a Medium-Carbon Steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2011-03 Induction Hardening 5150 Steel: Effects of Initial Microstructure and Heating Rate in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2010-09 An On-Heating Dilation Conversional Model for Austenite Formation in Hypoeutectoid Steels in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2009-12 Strain hardening behavior during manufacturing of tube shapes by hydroforming in METALS AND MATERIALS INTERNATIONAL
  • 2009-11 A Method for Measuring the Hardness of the Surface Layer on Hot Forging Dies Using a Nanoindenter in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2008-12 Failure During Sheared Edge Stretching in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2008-12 Correlation of Yield Strength and Tensile Strength with Hardness for Steels in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2008-04 Effect of Strain Rate on the Yield Stress of Ferritic Stainless Steels in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2006-01 Effect of strain rate on stress-strain behavior of alloy 309 and 304L austenitic stainless steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2005-09 Effect of strain and strain rate on the bauschinger effect response of three different steels in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2005-04 Feasibility of electro-slag cast steel for hot-working tools in METALS AND MATERIALS INTERNATIONAL
  • 2005-02 Thermal and mechanical properties of electro-slag cast steel for hot working tools in JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY
  • 2004-06 Control Scheme Using Forward Slip for a Multi-stand Hot Strip Rolling Mill in KSME INTERNATIONAL JOURNAL
  • 1999-10 Frictional behavior of the sliding interface between an A2 steel die and zinc-coated steel sheet in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 1995-07 The sensitivity of lab-measured friction coefficients in JOM
  • 1994-09 The thermal modeling of large axisymmetric forgings in JOM
  • 1987-02 Book Reviews in JOM
  • Affiliations

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "affiliation": [
          {
            "affiliation": {
              "id": "https://www.grid.ac/institutes/grid.254549.b", 
              "type": "Organization"
            }, 
            "isCurrent": true, 
            "type": "OrganizationRole"
          }
        ], 
        "familyName": "Van Tyne", 
        "givenName": "C J", 
        "id": "sg:person.07741770136.12", 
        "identifier": {
          "name": "orcid_id", 
          "type": "PropertyValue", 
          "value": [
            "0000-0002-7790-7685"
          ]
        }, 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.07741770136.12", 
          "https://orcid.org/0000-0002-7790-7685"
        ], 
        "sdDataset": "persons", 
        "sdDatePublished": "2019-03-07T14:09", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-researchers-20181010/20181011/dim_researchers/base/researchers_1918.json", 
        "type": "Person"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/person.07741770136.12'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/person.07741770136.12'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/person.07741770136.12'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/person.07741770136.12'


     




    Preview window. Press ESC to close (or click here)


    ...