John C Lippold


Ontology type: schema:Person     


Person Info

NAME

John C

SURNAME

Lippold

Publications in SciGraph latest 50 shown

  • 2019-01 Welding in the world – update 2018 in WELDING IN THE WORLD
  • 2018-07 Characterization of the Interface of an Alloy 625 Overlay on Steels Using Nanoindentation in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2018-05 The effect of postweld heat treatment on hydrogen-assisted cracking of 8630/Alloy 625 overlay in WELDING IN THE WORLD
  • 2018-05 Residual stress evaluation of components produced via direct metal laser sintering in WELDING IN THE WORLD
  • 2018-05 Tempering effect on the fusion boundary region of alloy 625 weld overlay on 8630 steel in WELDING IN THE WORLD
  • 2017-09 Evaluation of solidification cracking susceptibility in ERNiCr-3 (Filler Metal 82) weld metal using the cast pin tear test in WELDING IN THE WORLD
  • 2017-08 Use of a Fracture Surface Cleaning Method to Evaluate Elevated Temperature Cracking in Steel in JOURNAL OF FAILURE ANALYSIS AND PREVENTION
  • 2017-03 Effect of composition on grain boundary wetting characteristics in Ni-30Cr weld metal in WELDING IN THE WORLD
  • 2017-03 Development and testing of a high-chromium, Ni-based filler metal resistant to ductility dip cracking and solidification cracking in WELDING IN THE WORLD
  • 2016-12 Detailed Microstructural Characterization and Restoration Mechanisms of Duplex and Superduplex Stainless Steel Friction-Stir-Welded Joints in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2016 Stress-Relief Cracking in Simulated-Coarse-Grained Heat Affected Zone of a Creep-Resistant Steel in CRACKING PHENOMENA IN WELDS IV
  • 2016 Use of Computational and Experimental Techniques to Predict Susceptibility to Weld Cracking in CRACKING PHENOMENA IN WELDS IV
  • 2016 Metallurgical Factors Influencing the Susceptibility of Hydrogen Assisted Cracking in Dissimilar Metal Welds for Application Under Cathodic Protection in CRACKING PHENOMENA IN WELDS IV
  • 2016 Testing Approaches for Stress Relaxation Cracking in Gamma-Prime Strengthened Ni-Base Alloys in CRACKING PHENOMENA IN WELDS IV
  • 2016 Ductility-Dip Cracking Susceptibility of Commercially Pure Ni and Ni-Base Alloys Utilizing the Strain-to-Fracture Test in CRACKING PHENOMENA IN WELDS IV
  • 2016 Weldability Evaluation of High Chromium, Ni-Base Filler Metals Using the Cast Pin Tear Test in CRACKING PHENOMENA IN WELDS IV
  • 2014-09 Laser Engineered Net Shape (LENS) Technology for the Repair of Ni-Base Superalloy Turbine Components in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2014-01 Effect of diffusible hydrogen level on heat-affected zone hydrogen-induced cracking of high-strength steels in WELDING IN THE WORLD
  • 2013-09 Welding in the World—50 years in WELDING IN THE WORLD
  • 2013-09 Use of the cast pin tear test to study solidification cracking in WELDING IN THE WORLD
  • 2013-08 Microstructure Evolution During Friction Stir Processing and Hot Torsion Simulation of Ti-6Al-4V in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2013-08 Physical Simulation of Deformation and Microstructure Evolution During Friction Stir Processing of Ti-6Al-4V Alloy in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2013-08 Physical Simulation of Friction Stir Welding and Processing of Nickel-Base Alloys Using Hot Torsion in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2013-02 Characterization of Engineered Nickel-Base Alloy Surface Layers Produced by Additive Friction Stir Processing in METALLOGRAPHY, MICROSTRUCTURE, AND ANALYSIS
  • 2013-02 Fusion boundary microstructure evolution associated with embrittlement of Ni–base alloy overlays applied to carbon steel in WELDING IN THE WORLD
  • 2013-02 Editorial for Welding in the World, vol 57, no. 1 in WELDING IN THE WORLD
  • 2012-05 In-Situ Observations of Martensitic Transformation in Blast-Resistant Steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2012-04 Solidification Behavior and Weldability of Dissimilar Welds Between a Cr-Free, Ni-Cu Welding Consumable and Type 304L Austenitic Stainless Steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2011-12 Weldability Evaluation of a Cu-Bearing High-Strength Blast-Resistant Steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2011-12 Strength Recovery in a High-Strength Steel During Multiple Weld Thermal Simulations in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2011-12 Welding-Induced Microstructure Evolution of a Cu-Bearing High-Strength Blast-Resistant Steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2011-03 Weldability Studies of High-Cr, Ni-Base filler metals for power generation applications in WELDING IN THE WORLD
  • 2011-02-15 Further Development of the Cast Pin Tear Test for Evaluating Solidification Cracking in Ni-Base Alloys in HOT CRACKING PHENOMENA IN WELDS III
  • 2011-02-15 Weld Cracking Susceptibility of Alloy C-22 Weld-Metal in HOT CRACKING PHENOMENA IN WELDS III
  • 2011-02-15 Weldability of a New Ni-Cu Welding Consumable for Joining Austenitic Stainless Steels in HOT CRACKING PHENOMENA IN WELDS III
  • 2010-10-23 In Situ Determination of Phase Transformations and Structural Changes During Non-Equilibrium Material Processing in IN-SITU STUDIES WITH PHOTONS, NEUTRONS AND ELECTRONS SCATTERING
  • 2008 Ductility-Dip Cracking in High Chromium, Ni-Base Filler Metals in HOT CRACKING PHENOMENA IN WELDS II
  • 2008 Evaluation of Weld Solidification Cracking in Ni-Base Superalloys Using the Cast Pin Tear Test in HOT CRACKING PHENOMENA IN WELDS II
  • 2008 Weld Solidification Cracking in Solid-Solution Strengthened Ni-Base Filler Metals in HOT CRACKING PHENOMENA IN WELDS II
  • 2007-11 Single Sensor Differential Thermal Analysis of Phase Transformations and Structural Changes During Welding and Postweld Heat Treatment in WELDING IN THE WORLD
  • 2007-09 Further Investigations of Ductility-Dip Cracking in High Chromium, Ni-Base Filler Metals in WELDING IN THE WORLD
  • 2006-11 Fusion Boundary Microstructure Evolution in Aluminium Alloys in WELDING IN THE WORLD
  • 2006-09 In-Situ Weld Metal Continuous Cooling Transformation Diagrams in WELDING IN THE WORLD
  • 2005 New Insight into the Mechanism of Ductility-Dip Cracking in Ni-base Weld Metals in HOT CRACKING PHENOMENA IN WELDS
  • 2005 Recent Developments in Weldability Testing in HOT CRACKING PHENOMENA IN WELDS
  • 2004-04 Phase transformations in thermally exposed Au-Al ball bonds in JOURNAL OF ELECTRONIC MATERIALS
  • 2004-04 Partial diffusion reactions and the associated volume changes in thermally exposed Au-Al ball bonds in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2004-02 Simulating weld-fusion boundary microstructures in aluminum alloys in JOM
  • 2003-08 The relationship between chromium nitride and secondary austenite precipitation in duplex stainless steels in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2002-07 Development of the Strain-to-Fracture Test for Evaluating Ductility-Dip Cracking in Austenitic Stainless Steels and Ni-Base Alloys in WELDING IN THE WORLD
  • Affiliations

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "affiliation": [
          {
            "affiliation": {
              "id": "https://www.grid.ac/institutes/grid.261331.4", 
              "type": "Organization"
            }, 
            "isCurrent": true, 
            "type": "OrganizationRole"
          }
        ], 
        "familyName": "Lippold", 
        "givenName": "John C", 
        "id": "sg:person.0773600204.63", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.0773600204.63"
        ], 
        "sdDataset": "persons", 
        "sdDatePublished": "2019-03-07T13:16", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-researchers-20181010/20181011/dim_researchers/base/researchers_1076.json", 
        "type": "Person"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/person.0773600204.63'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/person.0773600204.63'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/person.0773600204.63'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/person.0773600204.63'


     




    Preview window. Press ESC to close (or click here)


    ...