Wen Feng Ding


Ontology type: schema:Person     


Person Info

NAME

Wen Feng

SURNAME

Ding

Publications in SciGraph latest 50 shown

  • 2019-04 Grindability of powder metallurgy nickel-base superalloy FGH96 and sensibility analysis of machined surface roughness in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2019-01 Towards the understanding of creep-feed deep grinding of DD6 nickel-based single-crystal superalloy in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2019-01 Material removal mechanism of PTMCs in high-speed grinding when considering consecutive action of two abrasive grains in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2018-07 Comparative investigation on grindability of K4125 and Inconel718 nickel-based superalloys in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2018-03 A review on metallic porous materials: pore formation, mechanical properties, and their applications in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2018-02 Influence of microstructure and grinding load on the bulk toughness and fracture behavior of PCBN abrasive grains in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2018-02 Grinding performance and surface integrity of particulate-reinforced titanium matrix composites in creep-feed grinding in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2018-01 Wear behavior of monolayer-brazed CBN wheels with small diameter during internal traverse grinding in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2018-01 Grindability evaluation and tool wear during grinding of Ti2AlNb intermetallics in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2018-01 Fracture mechanism of polycrystalline cubic boron nitride abrasive grains during single-grain grinding of Ti-6Al-4V titanium alloy in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2017-11 Numerical and experimental research on the grinding temperature of minimum quantity lubrication cooling of different workpiece materials using vegetable oil-based nanofluids in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2017-11 Influence of graphite addition on bonding properties of abrasive layer of metal-bonded CBN wheel in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2017-09 Optimization for internal traverse grinding of valves based on wheel deflection in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2017-08 Simulation research on the grinding forces and stresses distribution in single-grain surface grinding of Ti-6Al-4V alloy when considering the actual cutting-depth variation in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2017-07 Compressive Strength and Interface Microstructure of PCBN Grains Brazed with High-Frequency Induction Heating Method in ACTA METALLURGICA SINICA (ENGLISH LETTERS)
  • 2017-07 Investigation on size effect of grain wear behavior during grinding nickel-based superalloy Inconel 718 in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2017-05 High speed grinding of particulate reinforced titanium matrix composites using a monolayer brazed cubic boron nitride wheel in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2017-05 Prediction of grinding temperature of PTMCs based on the varied coefficients of friction in conventional-speed and high-speed surface grinding in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2017-03 Formation mechanism and geometry characteristics of exit-direction burrs generated in surface grinding of Ti-6Al-4V titanium alloy in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2017-03 Prediction of high-speed grinding temperature of titanium matrix composites using BP neural network based on PSO algorithm in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2017-03 Effects of undeformed chip thickness on grinding temperature and burn-out in high-efficiency deep grinding of Inconel718 superalloys in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2017-02 Review on grinding-induced residual stresses in metallic materials in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2017-01 Understanding the temperature distribution and influencing factors during high-frequency induction brazing of CBN super-abrasive grains in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2017-01 Understanding the residual stress distribution in brazed polycrystalline CBN abrasive grains in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2015-11 Understanding the effects of grinding speed and undeformed chip thickness on the chip formation in high-speed grinding in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2015-11 Finite element investigation on the evolution of wear and stresses in brazed CBN grits during grinding in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2015-03 Grinding temperature during high-efficiency grinding Inconel 718 using porous CBN wheel with multilayer defined grain distribution in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2015-02 Surface fractal evolution of fracture behavior of polycrystalline cBN grains in high-speed grinding in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2014-04 A comparison between conventional speed grinding and super-high speed grinding of (TiCp + TiBw) / Ti–6Al–4V composites using vitrified CBN wheel in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2013-10 Fractal analysis of wear topography of brazed polycrystalline cBN abrasive grains during grinding nickel super alloy in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2013-09 Preparation mechanism and grinding performance of single-layer self-lubrication brazed CBN abrasive wheels in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2013-09 Joining interface and grain fracture of single-layer brazed grinding wheels with binderless CBN grains in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2013-07 Fabrication and performance of porous metal-bonded CBN grinding wheels using alumina bubble particles as pore-forming agents in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2011-12 Brazed joints of CBN grains and AISI 1045 steel with AgCuTi-TiC mixed powder as filler materials in INTERNATIONAL JOURNAL OF MINERALS, METALLURGY, AND MATERIALS
  • 2011-02 Grain wear of brazed polycrystalline CBN abrasive tools during constant-force grinding Ti–6Al–4V alloy in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2010-12 Effects of heating temperature on interfacial microstructure and compressive strength of brazed CBN-AlN composite abrasive grits in JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATER. SCI. ED.
  • 2010-11 Wear behavior and mechanism of single-layer brazed CBN abrasive wheels during creep-feed grinding cast nickel-based superalloy in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2010-08 Influence of TiX (X=B2 or N) addition on the interfacial microstructure features of CBN grains and AgCuTi composite filler in JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATER. SCI. ED.
  • 2007-09 Development and performance of monolayer brazed CBN grinding tools in THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
  • 2006-06 Interfacial reaction between cubic boron nitride and Ti during active brazing in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "affiliation": [
          {
            "affiliation": {
              "id": "https://www.grid.ac/institutes/grid.64938.30", 
              "type": "Organization"
            }, 
            "isCurrent": true, 
            "type": "OrganizationRole"
          }
        ], 
        "familyName": "Ding", 
        "givenName": "Wen Feng", 
        "id": "sg:person.016704376313.20", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016704376313.20"
        ], 
        "sdDataset": "persons", 
        "sdDatePublished": "2019-03-07T13:44", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-researchers-20181010/20181011/dim_researchers/base/researchers_1517.json", 
        "type": "Person"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/person.016704376313.20'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/person.016704376313.20'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/person.016704376313.20'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/person.016704376313.20'


     




    Preview window. Press ESC to close (or click here)


    ...