J N Dupont


Ontology type: schema:Person     


Person Info

NAME

J N

SURNAME

Dupont

Publications in SciGraph latest 50 shown

  • 2019-02 Simulation of the Precipitation Kinetics of Maraging Stainless Steels 17-4 and 13-8+Mo During Multi-pass Welding in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2018-04 Atom-Probe Tomographic Investigation of Austenite Stability and Carbide Precipitation in a TRIP-Assisted 10 Wt Pct Ni Steel and Its Weld Heat-Affected Zones in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2017-12 Effects of Heating and Cooling Rates on Phase Transformations in 10 Wt Pct Ni Steel and Their Application to Gas Tungsten Arc Welding in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2017-04 Characterization of Discontinuous Coarsening Reaction Products in INCONEL® Alloy 740H® Fusion Welds in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2017-01 Microstructural Evolution and Mechanical Properties of Simulated Heat-Affected Zones in Cast Precipitation-Hardened Stainless Steels 17-4 and 13-8+Mo in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2016-09 Microstructural Evolution and Creep-Rupture Behavior of A-USC Alloy Fusion Welds in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2015-12 Mechanical Properties and Microstructural Evolution of Simulated Heat-Affected Zones in Wrought Eglin Steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2015-11 Investigation of Strength Recovery in Welds of NUCu-140 Steel Through Multipass Welding and Isothermal Post-Weld Heat Treatments in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2015-07 Multi-component Cu-Strengthened Steel Welding Simulations: Atom Probe Tomography and Synchrotron X-ray Diffraction Analyses in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2015-02 Microstructural Evolution of INCONEL® Alloy 740H® Fusion Welds During Creep in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2014-06 Homogenization and Dissolution Kinetics of Fusion Welds in INCONEL® Alloy 740H® in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2013-07 Welding of Materials for Energy Applications in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2013-04 An Atom-Probe Tomographic Study of Arc Welds in a Multi-Component High-Strength Low-Alloy Steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2012-11 Microstructural Evolution and Mechanical Properties of Fusion Welds in an Iron-Copper-Based Multicomponent Steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2011-03 An Investigation of the Massive Transformation from Ferrite to Austenite in Laser-Welded Mo-Bearing Stainless Steels in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2011-02-15 Application of Solidification Models for Controlling the Microstructure and Hot Cracking Response of Engineering Alloys in HOT CRACKING PHENOMENA IN WELDS III
  • 2011-02-15 Stray Grain Formation and Solidification Cracking Susceptibility of Single Crystal Ni-Base Superalloy CMSX-4 in HOT CRACKING PHENOMENA IN WELDS III
  • 2010-01 Stray Grain Formation in Welds of Single-Crystal Ni-Base Superalloy CMSX-4 in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2010-01 Influence of Ti and C on the Solidification Microstructure of Fe-10Al-5Cr Alloys in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2009-08 Evaluation of the Corrosion Resistance of Fe–Al–Cr Alloys in Simulated Low NOx Environments in OXIDATION OF METALS
  • 2009-08 Evaluation of the Corrosion Resistance of Fe–Al–Cr Alloys in Simulated Low NOx Environments in OXIDATION OF METALS
  • 2007-09 Effect of Composition on the Formation of Sigma during Single-Pass Welding of Mo-Bearing Stainless Steels in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2007-04 Phase Transformations and Microstructural Evolution of Mo-Bearing Stainless Steels in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2007-02 The Influence of Centerline Sigma (σ) Phase on the Through-Thickness Toughness and Tensile Properties of Alloy AL-6XN in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2007-01 Microstructural development and solidification cracking susceptibility of Cu deposits on steel: Part II—use of a Ni interlayer in JOURNAL OF MATERIALS SCIENCE
  • 2007-01 Phase Transformations and Microstructural Evolution of Mo-Bearing Stainless Steels in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2007-01 Microstructural development and solidification cracking susceptibility of Cu deposits on steel: Part I in JOURNAL OF MATERIALS SCIENCE
  • 2006-09 A solidification diagram for Ni-Cr-Mo-Gd alloys estimated by quantitative microstructural characterization and thermal analysis in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2006-06 Mathematical modeling of solidification paths in ternary alloys: Limiting cases of solute redistribution in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2006-04 Effect of composition on the solidification behavior of several Ni-Cr-Mo and Fe-Ni-Cr-Mo alloys in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2005-12 Direct laser deposition of a single-crystal Ni3Al-based IC221W alloy in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2004-03 Fabrication of carbide-particle-reinforced titanium aluminide-matrix composites by laser-engineered net shaping in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2004-03 Fabrication of carbide-particle-reinforced titanium aluminide-matrix composites by laser-engineered net shaping in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2004-02 The Effect of Water Vapor on Passive-Layer Stability and Corrosion Behavior of Fe–Al–Cr Base Alloys in OXIDATION OF METALS
  • 2004-02 Process efficiency measurements in the laser engineered net shaping process in METALLURGICAL AND MATERIALS TRANSACTIONS B
  • 2003-11 In-situ reactive processing of nickel aluminides by laser-engineered net shaping in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2003-08 Composition control in the direct laser-deposition process in METALLURGICAL AND MATERIALS TRANSACTIONS B
  • 2003-05 Solidification of hastelloy alloys: an alternative interpretation in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2003-04 Development of Gd-enriched alloys for spent nuclear fuel applications—Part 1: Preliminary characterization of small scale Gd-enriched stainless steels in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2001-10 The postweld heat-treatment response of simulated coarse-grained heat-affected zones in a new ferritic steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2000-10 Growth of Nodular Corrosion Products on Fe–Al Alloys in Various High-Temperature Gaseous Environments in OXIDATION OF METALS
  • 2000-07 The effect of aluminum content on the corrosion behavior of Fe-Al alloys in reducing environments at 700 °C in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 1999-07 Modeling solid-particle erosion of ductile alloys in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 1998-11 Solidification of Nb-bearing superalloys: Part I. Reaction sequences in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 1998-11 Solidification of Nb-bearing superalloys: Part II. Pseudoternary solidification surfaces in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 1998-08 On optimization of the powder plasma arc surfacing process in METALLURGICAL AND MATERIALS TRANSACTIONS B
  • 1998-05 A combined solubility product/new PHACOMP approach for estimating temperatures of secondary solidification reactions in superalloy weld metals containing Nb and C in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 1998-04 Solid particle erosion resistance of ductile wrought superalloys and their weld overlay coatings in JOURNAL OF MATERIALS SCIENCE
  • 1997-08 Microsegregation and solidification cracking of an HR-160 weld overlay in JOURNAL OF MATERIALS SCIENCE
  • 1996-11 Solidification of an alloy 625 weld overlay in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • Affiliations

  • Lehigh University (current)
  • JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "affiliation": [
          {
            "affiliation": {
              "id": "https://www.grid.ac/institutes/grid.259029.5", 
              "type": "Organization"
            }, 
            "isCurrent": true, 
            "type": "OrganizationRole"
          }
        ], 
        "familyName": "Dupont", 
        "givenName": "J N", 
        "id": "sg:person.016703651067.48", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.016703651067.48"
        ], 
        "sdDataset": "persons", 
        "sdDatePublished": "2019-03-07T14:07", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-researchers-20181010/20181011/dim_researchers/base/researchers_1886.json", 
        "type": "Person"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/person.016703651067.48'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/person.016703651067.48'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/person.016703651067.48'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/person.016703651067.48'


     




    Preview window. Press ESC to close (or click here)


    ...