A P Savitskii


Ontology type: schema:Person     


Person Info

NAME

A P

SURNAME

Savitskii

Publications in SciGraph latest 50 shown

  • 1990-08 Process of alloy forming in the powder system Al-Mg in POWDER METALLURGY AND METAL CERAMICS
  • 1990-03 Volumetric changes in powder bodies in liquid-phase sintering of the aluminum-magnesium system in POWDER METALLURGY AND METAL CERAMICS
  • 1988-07 Influence of solubility in the solid phase on volume changes in liquid-phase sintering of aluminum-base powder metallurgy specimens in POWDER METALLURGY AND METAL CERAMICS
  • 1988-05 Nature of the growth of Al-Cu powder compacts during liquid-phase sintering in POWDER METALLURGY AND METAL CERAMICS
  • 1987-08 Current views on the processes of sintering in the presence of a liquid phase in POWDER METALLURGY AND METAL CERAMICS
  • 1987-07 Effect of porosity on the volume changes experienced by Al-Cu compacts during liquid-phase sintering in POWDER METALLURGY AND METAL CERAMICS
  • 1986-09 Effect of aluminum particle size on the volume changes experienced by compacts from a mixture of aluminum and copper powders during liquid-phase sintering in POWDER METALLURGY AND METAL CERAMICS
  • 1986-03 Structure formation during the sintering of aluminum-copper alloys in POWDER METALLURGY AND METAL CERAMICS
  • 1985-08 Deformation of aluminum-copper powder solids during liquid-phase sintering in POWDER METALLURGY AND METAL CERAMICS
  • 1985-06 Possibility of preventing intergranular fracture of cadmium in creep in METAL SCIENCE AND HEAT TREATMENT
  • 1984-09 Dilatometric investigations of the processes of liquid-phase sintering of materials of the Cu-Sn system in POWDER METALLURGY AND METAL CERAMICS
  • 1983-12 Volume changes experienced by Cu-Sn compacts during liquid-phase sintering in POWDER METALLURGY AND METAL CERAMICS
  • 1983-03 Dilatometric investigations of the growth of Ti-Al compacts during liquid-phase sintering in POWDER METALLURGY AND METAL CERAMICS
  • 1982-12 A dilatometer for studies of liquid-phase sintering processes in POWDER METALLURGY AND METAL CERAMICS
  • 1982-10 Volume changes experienced by Al-Zn compacts during liquid-phase sintering in POWDER METALLURGY AND METAL CERAMICS
  • 1982-05 Volume changes exhibited by Cu-Al compacts during liquid-phase sintering in POWDER METALLURGY AND METAL CERAMICS
  • 1981-10 Melt formation in the titanium-aluminum system at ambient temperatures below the melting point of aluminum in POWDER METALLURGY AND METAL CERAMICS
  • 1981-09 Effect of powder particle size on the growth of titanium compacts during liquid-phase sintering with aluminum in POWDER METALLURGY AND METAL CERAMICS
  • 1981-02 Prevention of compact growth in the sintering of complex systems in POWDER METALLURGY AND METAL CERAMICS
  • 1981-01 Compact porosity changes in liquid-phase sintering due to diffusional interaction between phases in POWDER METALLURGY AND METAL CERAMICS
  • 1980-07 Some characteristic features of the sintering of binary systems in POWDER METALLURGY AND METAL CERAMICS
  • 1979-02 Compact growth in liquid-phase sintering in POWDER METALLURGY AND METAL CERAMICS
  • 1977-05 Effect of solid-state solubility on the volume changes experienced by aluminum during liquid-phase sintering in POWDER METALLURGY AND METAL CERAMICS
  • 1975-07 Temperature dependence of the liquid-metal embrittlement of tin in MATERIALS SCIENCE
  • 1975-07 Effects in the interphase boundary with contact melting in three-component systems in RUSSIAN PHYSICS JOURNAL
  • 1973-12 Sintering of aluminum with copper additions in POWDER METALLURGY AND METAL CERAMICS
  • 1973-10 Contact melting zone in two- and three-component systems in RUSSIAN PHYSICS JOURNAL
  • 1972-10 Effect of multicomponent admixtures on the change of density of cadmium under cyclic thermal treatment in RUSSIAN PHYSICS JOURNAL
  • 1972-07 Effect of annealing on density of metals with small eutectic additions in RUSSIAN PHYSICS JOURNAL
  • 1972-06 Diffusional mechanism of embrittlement by liquid metals in RUSSIAN PHYSICS JOURNAL
  • 1970-09 Plasticity of tin-lead alloys during contact melting with bismuth, cadmium, and indium in RUSSIAN PHYSICS JOURNAL
  • 1970-01 Effect of impurity concentration on the cadmium density during cyclic thermal treatment in RUSSIAN PHYSICS JOURNAL
  • 1969-07 Effect of impurities on cadmium density during cyclic thermal treatment in RUSSIAN PHYSICS JOURNAL
  • 1969-06 Effect of cyclic heat treatment on the density of cadmium with a bismuth admixture in RUSSIAN PHYSICS JOURNAL
  • 1969-03 Effect on tin plasticity of the composition of a ternary alloy in contact with the tin in RUSSIAN PHYSICS JOURNAL
  • 1968-08 Sintering aluminum in the presence of a liquid phase in RUSSIAN PHYSICS JOURNAL
  • 1968-06 Effect of the composition of binary alloys melted in contact with tin on its plasticity in RUSSIAN PHYSICS JOURNAL
  • 1968-05 Reduction of cupric oxide by aluminum in sintering of Al-CuO system in RUSSIAN PHYSICS JOURNAL
  • 1968-02 X-ray study of the recrystallization of copper powder during sintering in POWDER METALLURGY AND METAL CERAMICS
  • 1967-07 Brittle fracture of cadmium and tin during contact melting in the presence of multicomponent eutectics in RUSSIAN PHYSICS JOURNAL
  • 1967-03 Strength loss during the annealing of deformed nickel-alumina alloys in POWDER METALLURGY AND METAL CERAMICS
  • 1967-01 Effects of preparation method on the density and deformation resistance of sintered monel in RUSSIAN PHYSICS JOURNAL
  • 1967-01 Properties of extruded nickel-alumina alloys in POWDER METALLURGY AND METAL CERAMICS
  • 1965-11 The effect of the particle size of aluminum powder on the sintering of a Cu-Al alloy in the presence of a liquid phase in POWDER METALLURGY AND METAL CERAMICS
  • 1965-09 The deformation resistance and stability of strain distortions of sintered alloys in POWDER METALLURGY AND METAL CERAMICS
  • 1965-05 Effects of sintering temperature on the mechanical properties of Cu-Al alloys prepared by repeated pressing and sintering in RUSSIAN PHYSICS JOURNAL
  • 1965-03 Sintering in Cu-Al powders in RUSSIAN PHYSICS JOURNAL
  • 1965-02 Mechanical parameters of copper-aluminum cermets as functions of temperature in POWDER METALLURGY AND METAL CERAMICS
  • 1964-07 The effect of sintering temperature on the strength of powder copper subjected to repeated pressing in POWDER METALLURGY AND METAL CERAMICS
  • JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "affiliation": [
          {
            "affiliation": {
              "id": "http://www.grid.ac/institutes/grid.4886.2", 
              "type": "Organization"
            }, 
            "isCurrent": true, 
            "type": "OrganizationRole"
          }, 
          {
            "id": "http://www.grid.ac/institutes/grid.27736.37", 
            "type": "Organization"
          }, 
          {
            "id": "http://www.grid.ac/institutes/grid.77602.34", 
            "type": "Organization"
          }, 
          {
            "id": "http://www.grid.ac/institutes/grid.482441.f", 
            "type": "Organization"
          }
        ], 
        "familyName": "Savitskii", 
        "givenName": "A P", 
        "id": "sg:person.013277447465.87", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.013277447465.87"
        ], 
        "sdDataset": "persons", 
        "sdDatePublished": "2022-01-01T19:56", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-springernature-scigraph/baseset/20220101/entities/gbq_results/person/person_719.jsonl", 
        "type": "Person"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/person.013277447465.87'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/person.013277447465.87'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/person.013277447465.87'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/person.013277447465.87'


     




    Preview window. Press ESC to close (or click here)


    ...