Matvey Loshak


Ontology type: schema:Person     


Person Info

NAME

Matvey

SURNAME

Loshak

Publications in SciGraph latest 50 shown

  • 2017-11 Erratum to: “structure and properties of superhard materials based on aluminum dodecaboride α-AlB12” in JOURNAL OF SUPERHARD MATERIALS
  • 2017-09 Structure and properties of superhard materials based on aluminum dodecaboride α-AlB12 in JOURNAL OF SUPERHARD MATERIALS
  • 2014-01 Studies of the oxidation stability, mechanical characteristics of materials based on max phases of the Ti-Al-(C, N) systems, and of the possibility of their use as tool bonds and materials for polishing in JOURNAL OF SUPERHARD MATERIALS
  • 2013-03 Structure and physico-mechanical properties of CVD diamonds of various crystalline perfections in the hybridite material in JOURNAL OF SUPERHARD MATERIALS
  • 2012-09 The effect of the indentation load on the results of measuring hardness of superhard materials in JOURNAL OF SUPERHARD MATERIALS
  • 2012-05 Structure and hardness of octahedral natural diamond single crystals depending on the HPHT treatment conditions in JOURNAL OF SUPERHARD MATERIALS
  • 2012-04 Strength of diamond powders synthesized in the Mg-Zn-B-C system in JOURNAL OF SUPERHARD MATERIALS
  • 2011-09 Mechanical characteristics of tungsten-free hard alloys (review) in STRENGTH OF MATERIALS
  • 2011-08 Hardness of superhard polycrystalline materials and its temperature dependence in JOURNAL OF SUPERHARD MATERIALS
  • 2010-12 Diamond polycrystalline composite material and its properties in JOURNAL OF SUPERHARD MATERIALS
  • 2010-02 Physico-mechanical properties of cBN composites produced by a high-pressure reaction sintering of cubic boron nitride and aluminum owders in JOURNAL OF SUPERHARD MATERIALS
  • 2010-02 Physicotechnical properties of wurtzitic AlN-based ceramics and composites with ceramic matrix in JOURNAL OF SUPERHARD MATERIALS
  • 2009-02 A study of elastic aftereffect in injection casting of thermoplastic feedstocks based on SiC, AlN, WC powders and its influence on mechanical properties of the workpiece material in JOURNAL OF SUPERHARD MATERIALS
  • 2008-12 Structure, mechanical and functional properties of aluminum nitride-silicon carbide ceramic material in JOURNAL OF SUPERHARD MATERIALS
  • 2008-10 Comparative physico-mechanical characteristics of micron powders of synthetic and natural diamonds and polycrystalline composite materials based on them in JOURNAL OF SUPERHARD MATERIALS
  • 2008-02 Physico-mechanical properties and structure of diamond polycrystalline composite materials produced from variously dispersed powders in JOURNAL OF SUPERHARD MATERIALS
  • 2007-12 Composite superhard materials containing boron carbide in JOURNAL OF SUPERHARD MATERIALS
  • 2006-09 Technological aspects of heat treatment of hard alloys in the sintered state in POWDER METALLURGY AND METAL CERAMICS
  • 2005-09 Metallographic Aspects of Deformation and Fracture of Hard Alloys under Compression in POWDER METALLURGY AND METAL CERAMICS
  • 2001-11 Estimating the Mechanical Properties of Diamond-Containing Composites Using the Value of the Coercive Force in MATERIALS SCIENCE
  • 2000-09 Application of the Pisarenko–Lebedev Criterion to the Strength Analysis of High-Pressure Appparatus for the Synthesis of Superhard Materials in STRENGTH OF MATERIALS
  • 1998-05 Comparative estimation of mechanical properties of cemented carbides by the kinetics of penetration of a rigid punch under contact cyclic loading in STRENGTH OF MATERIALS
  • 1993-03 Strengthening of hard alloys prepared on a base of high-temperature tungsten carbide with heat treatment in POWDER METALLURGY AND METAL CERAMICS
  • 1992-11 Enhancement of mechanical properties of hard alloy inserts for drill bits by heat treatment in SOVIET POWDER METALLURGY AND METAL CERAMICS
  • 1991-01 Problem of the mechanism of hardening hard alloys by heat treatment in SOVIET POWDER METALLURGY AND METAL CERAMICS
  • 1990-12 Thermal stresses in WC-Co hard alloy after sintering in STRENGTH OF MATERIALS
  • 1990-05 Application of acoustic emission in the investigation the mechanism of strengthening of hard alloys by heat treatment in SOVIET POWDER METALLURGY AND METAL CERAMICS
  • 1988-01 Prediction of the mechanical characteristics of sintered alloys WC-Co according to the known microstructure in STRENGTH OF MATERIALS
  • 1986-05 An x-ray diffraction investigation of heat-treated Wc-Co sintered carbides in SOVIET POWDER METALLURGY AND METAL CERAMICS
  • 1983-11 A mechanical model of deformation and failure of tungsten-cobalt hard alloys. Report 1 in STRENGTH OF MATERIALS
  • 1983-11 A mechanical model of deformation and failure of tungsten-cobalt hard alloys. Report 2 in STRENGTH OF MATERIALS
  • 1983-09 Strength of the cemented carbide elements of high-pressure apparatus for synthesis of superhard materials in STRENGTH OF MATERIALS
  • 1981-09 Evaluation of the endurance of hard-alloy components operating under cyclic loading conditions in STRENGTH OF MATERIALS
  • 1981-06 Vibration strengthening of hard alloys in STRENGTH OF MATERIALS
  • 1979-06 Effect of heat treatment on the wear resistance of hot-pressed hard metals under abrasive friction conditions in SOVIET POWDER METALLURGY AND METAL CERAMICS
  • 1978-05 Increasing the service life of drilling bits by vibrational working in SOVIET MATERIALS SCIENCE
  • 1978-03 Increasing the corrosion-fatigue strength of 20Kh13 and 09Kh17N7Yu steels used for the production of propellor shafts in SOVIET MATERIALS SCIENCE
  • 1977-02 Effect of the size factor on the strength of materials in the complex stressed state in STRENGTH OF MATERIALS
  • 1976-11 Fatigue-corrosion resistance of steels used in diamond-disk saws in SOVIET MATERIALS SCIENCE
  • 1976-11 Installation for testing materials under hydrostatic pressure in STRENGTH OF MATERIALS
  • 1974-03 A unit for determining first order residual stresses in hard alloys in STRENGTH OF MATERIALS
  • 1971-09 Device for testing fatigue strength under shock loading in STRENGTH OF MATERIALS
  • 1971-08 The scale effect in metalloceramic hard alloys of the tungsten group in STRENGTH OF MATERIALS
  • 1971-01 Ratio of durabilities of hard alloys under repeated impactive and harmonic loadings in STRENGTH OF MATERIALS
  • 1970-09 Effect of technological factors on the strength and life of hard alloys in SOVIET POWDER METALLURGY AND METAL CERAMICS
  • 1967-12 Modulus of elasticity of hard alloys in SOVIET POWDER METALLURGY AND METAL CERAMICS
  • 1967-07 Effect of diamond surface grinding conditions on the strength of hard alloys in SOVIET MATERIALS SCIENCE
  • JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "familyName": "Loshak", 
        "givenName": "Matvey", 
        "id": "sg:person.012544051017.92", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012544051017.92"
        ], 
        "sdDataset": "persons", 
        "sdDatePublished": "2019-03-07T13:53", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-researchers-20181010/20181011/dim_researchers/base/researchers_1659.json", 
        "type": "Person"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/person.012544051017.92'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/person.012544051017.92'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/person.012544051017.92'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/person.012544051017.92'


     

    This table displays all metadata directly associated to this object as RDF triples.

    11 TRIPLES      9 PREDICATES      10 URIs      6 LITERALS      1 BLANK NODES

    Subject Predicate Object
    1 sg:person.012544051017.92 schema:familyName Loshak
    2 schema:givenName Matvey
    3 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012544051017.92
    4 schema:sdDatePublished 2019-03-07T13:53
    5 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    6 schema:sdPublisher N9a6217aa03d14912a9a05dd7e52fdaa7
    7 sgo:license sg:explorer/license/
    8 sgo:sdDataset persons
    9 rdf:type schema:Person
    10 N9a6217aa03d14912a9a05dd7e52fdaa7 schema:name Springer Nature - SN SciGraph project
    11 rdf:type schema:Organization
     




    Preview window. Press ESC to close (or click here)


    ...