S L Semiatin


Ontology type: schema:Person     


Person Info

NAME

S L

SURNAME

Semiatin

Publications in SciGraph latest 50 shown

  • 2019-03 Effect of Test Method on Stress-Relaxation Behavior of Alloy 718 in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2019-03 Martensite-to-Austenite Reversion and Recrystallization in Cryogenically-Rolled Type 321 Metastable Austenitic Steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2018-12 The Effect of Cooling Rate on High-Temperature Precipitation in a Powder-Metallurgy, Gamma/Gamma-Prime Nickel-Base Superalloy in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2018-12 EBSD Characterization of Cryogenically Rolled Type 321 Austenitic Stainless Steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2018-11 A Comparison of the Inertia Friction Welding Behavior of Similar and Dissimilar Ni-Based Superalloys in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2018-10 A Transfer Function for Relating Mean 2D Cross-Section Measurements to Mean 3D Particle Sizes in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2018-08 Optimization of VPSC Model Parameters for Two-Phase Titanium Alloys: Flow Stress Vs Orientation Distribution Function Metrics in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2018-07 Effect of Cold Deformation and Annealing on the Microstructure and Tensile Properties of a HfNbTaTiZr Refractory High Entropy Alloy in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2018-06 Dynamic transformation of Ti–6Al–4V during torsion in the two-phase region in JOURNAL OF MATERIALS SCIENCE
  • 2018-05 Opposing and Driving Forces Associated with the Dynamic Transformation of Ti-6Al-4V in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2018-03 Early Stages of Microstructure and Texture Evolution during Beta Annealing of Ti-6Al-4V in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2018 The High-Temperature Bauschinger Effect in Alloy 718 in PROCEEDINGS OF THE 9TH INTERNATIONAL SYMPOSIUM ON SUPERALLOY 718 & DERIVATIVES: ENERGY, AEROSPACE, AND INDUSTRIAL APPLICATIONS
  • 2017-11 The Radial Temperature Gradient in the Gleeble® Hot-Torsion Test and Its Effect on the Interpretation of Plastic-Flow Behavior in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2017-11 The Kinetics of Precipitate Dissolution in a Nickel-Base Superalloy in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2017-10 Evolution of Texture from a Single Crystal Ti-6Al-4V Substrate During Electron Beam Directed Energy Deposition in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2017-07 Efficiency of the Inertia Friction Welding Process and Its Dependence on Process Parameters in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2017-04 A Comparison of the Plastic-Flow Response of a Powder-Metallurgy Nickel-Base Superalloy Under Nominally-Isothermal and Transient-Heating Hot-Working Conditions in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2016-12 Effect of Preheating on the Inertia Friction Welding of the Dissimilar Superalloys Mar-M247 and LSHR in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2016-12 A dataset for the development, verification, and validation of microstructure-sensitive process models for near-alpha titanium alloys in INTEGRATING MATERIALS AND MANUFACTURING INNOVATION
  • 2016-12 Precipitation in powder-metallurgy, nickel-base superalloys: review of modeling approach and formulation of engineering methods to determine input data in INTEGRATING MATERIALS AND MANUFACTURING INNOVATION
  • 2016-10 The Influence of Grain Size on Twinning and Microstructure Refinement During Cold Rolling of Commercial-Purity Titanium in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2016-09 Coarsening Behavior and Plastic Flow of Ti-6Al-2Sn-4Zr-2Mo-0.1Si with an Ultrafine Microstructure in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2016-08 Effect of Process Variables on the Inertia Friction Welding of Superalloys LSHR and Mar-M247 in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2016-08 Precipitation Modeling of Multi-Component Nickel-Based Alloys in JOURNAL OF PHASE EQUILIBRIA
  • 2015-11 Determination of Pressure Effects on the α → γ Phase Transition and Size of Fe in Nd-Fe-B Spring Exchange Magnets in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2015-09 Characterization of Plastic Flow Pertinent to the Evolution of Bulk Residual Stress in Powder-Metallurgy, Nickel-Base Superalloys in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2015-04 An Investigation of High-Temperature Precipitation in Powder-Metallurgy, Gamma/Gamma-Prime Nickel-Base Superalloys in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2015-03 Site-Dependent Tension Properties of Inertia Friction-Welded Joints Made From Dissimilar Ni-based Superalloys in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2014-12 Workflow for integrating mesoscale heterogeneities in materials structure with process simulation of titanium alloys in INTEGRATING MATERIALS AND MANUFACTURING INNOVATION
  • 2014-12 The Effect of Forging Variables on the Supersolvus Heat-Treatment Response of Powder-Metallurgy Nickel-Base Superalloys in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2014-11 Inertia Friction Welding of Dissimilar Superalloys Mar-M247 and LSHR in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2014-02 Alloying-Element Loss During High-Temperature Processing of a Nickel-Base Superalloy in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2013-11 Characterization of Microstructure, Texture, and Microtexture in Near-Alpha Titanium Mill Products in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2013-08 Effect of Process Variables on Transformation-Texture Development in Ti-6Al-4V Sheet Following Beta Heat Treatment in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2013-06 Plastic Flow and Microstructure Evolution during Thermomechanical Processing of a PM Nickel-Base Superalloy in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2012-12 Microstructure Evolution and Composition Control During the Processing of Thin-Gage Metallic Foil in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2012-10 Variant Selection During Cooling after Beta Annealing of Ti-6Al-4V Ingot Material in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2012-05 Microstructure Evolution during Supersolvus Heat Treatment of a Powder Metallurgy Nickel-Base Superalloy in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2012-03 Mechanisms and Kinetics of Static Spheroidization of Hot-Worked Ti-6Al-2Sn-4Zr-2Mo-0.1Si with a Lamellar Microstructure in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2011-07 A Self-Consistent Approach for Modeling the Flow Behavior of the Alpha and Beta Phases in Ti-6Al-4V in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2011-04 Microstructure and Texture Evolution During Hot-Pack Rolling of Nickel-Base Superalloys to Thin Sheet and Foil in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2010-09 Preface to the Special Issue on Ultrafine Grained Materials in JOURNAL OF MATERIALS SCIENCE
  • 2010-02 Plastic Flow and Microstructure Evolution during Low-Temperature Superplasticity of Ultrafine Ti-6Al-4V Sheet Material in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2008-12 Low-Temperature Coarsening and Plastic Flow Behavior of an Alpha/Beta Titanium Billet Material with an Ultrafine Microstructure in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2008-12 Low-Temperature Coarsening and Plastic Flow Behavior of an Alpha/Beta Titanium Billet Material with an Ultrafine Microstructure in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2008-11 Branch Elimination during Heat Treatment of Titanium Alloys with a Colony-Alpha Microstructure in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2008-07 Modeling of Texture Evolution during Hot Forging of Alpha/Beta Titanium Alloys in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2008-04 Modeling of Texture Evolution during Hot Forging of Alpha/Beta Titanium Alloys in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2008-03 Effect of Stress and Strain Path on Cavity Closure during Hot Working of an Alpha/Beta Titanium Alloy in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2007-12 Effect of Strain-Path Reversal on Microstructure Evolution and Cavitation during Hot Torsion Testing of Ti-6Al-4V in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • Affiliations

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "affiliation": [
          {
            "affiliation": {
              "id": "https://www.grid.ac/institutes/grid.417730.6", 
              "type": "Organization"
            }, 
            "isCurrent": true, 
            "type": "OrganizationRole"
          }
        ], 
        "familyName": "Semiatin", 
        "givenName": "S L", 
        "id": "sg:person.012351107545.28", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.012351107545.28"
        ], 
        "sdDataset": "persons", 
        "sdDatePublished": "2019-03-07T13:49", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-researchers-20181010/20181011/dim_researchers/base/researchers_1591.json", 
        "type": "Person"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/person.012351107545.28'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/person.012351107545.28'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/person.012351107545.28'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/person.012351107545.28'


     




    Preview window. Press ESC to close (or click here)


    ...