David K Matlock


Ontology type: schema:Person     


Person Info

NAME

David K

SURNAME

Matlock

Publications in SciGraph latest 50 shown

  • 2018-10 Formation of Banded Microstructures with Rapid Intercritical Annealing of Cold-Rolled Sheet Steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2018-05 On the Importance of Adiabatic Heating on Deformation Behavior of Medium-Manganese Sheet Steels in JOM
  • 2016 Contrasting the Use of Contact and Non-Contact Dilatometers to Measure Ferrite Recrystallization in Cold-Rolled Dual-Phase Steel in PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON RECRYSTALLIZATION AND GRAIN GROWTH (REX&GG 2016)
  • 2016 Contributions of Vanadium to Properties of Heat Treated Medium Carbon Forging Steels in HSLA STEELS 2015, MICROALLOYING 2015 & OFFSHORE ENGINEERING STEELS 2015
  • 2014-10 Development of a Plane Strain Tensile Geometry to Assess Shear Fracture in Dual Phase Steels in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 2013-06 Transmission Electron Microscopy Analysis of Yielding in Ultrafine-Grained Medium Mn Transformation-Induced Plasticity Steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2013-01 Effects of Deformation Behavior and Processing Temperature on the Fatigue Performance of Deep-Rolled Medium Carbon Bar Steels in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2012-07 Hydrogen Effects in Prestrained Transformation Induced Plasticity Steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2012-04 Improvement of the Hydrogen Microprint Technique on AHSS Steels in METALLOGRAPHY, MICROSTRUCTURE, AND ANALYSIS
  • 2011-12 Nitrogen Effects in Dual-Phase Sheet Steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2011-12 Quenched and Partitioned Microstructures Produced via Gleeble Simulations of Hot-Strip Mill Cooling Practices in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2011-12 Austenite Stability Effects on Tensile Behavior of Manganese-Enriched-Austenite Transformation-Induced Plasticity Steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2011-12 Analysis of Microstructure Evolution in Quenching and Partitioning Automotive Sheet Steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2011-08 Effect of grain size on strain-induced martensitic transformation start temperature in an ultrafine grained metastable austenitic steel in METALS AND MATERIALS INTERNATIONAL
  • 2011-04-14 Developments in High Strength Steels with Duplex Microstructures of Bainite or Martensite with Retained Austenite: Progress with Quenching and Partitioning Heat Treatment in ADVANCED STEELS
  • 2010-04 Finite element and analytical study of plane strain draw-bend failure of advanced high strength steels in INTERNATIONAL JOURNAL OF MATERIAL FORMING
  • 2009 Third Generation of AHSS: Microstructure Design Concepts in MICROSTRUCTURE AND TEXTURE IN STEELS
  • 2008-04 Effect of Strain Rate on the Yield Stress of Ferritic Stainless Steels in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2008-04 The high-speed deformation behavior of TRIP steels in METALS AND MATERIALS INTERNATIONAL
  • 2008 Martensite tempering behaviour relevant to the quenching and partitioning process in EMC 2008 14TH EUROPEAN MICROSCOPY CONGRESS 1–5 SEPTEMBER 2008, AACHEN, GERMANY
  • 2008 Microstructural characterisation of steel heat-treated by the novel quenching and partitioning process in EMC 2008 14TH EUROPEAN MICROSCOPY CONGRESS 1–5 SEPTEMBER 2008, AACHEN, GERMANY
  • 2007-12 Mechanical properties of high-Si plate steel produced by the quenching and partitioning process in METALS AND MATERIALS INTERNATIONAL
  • 2006-06 Deformation-induced phase transformation and strain hardening in type 304 austenitic stainless steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2006-02 The effect of retained austenite stability on high speed deformation behavior of TRIP steels in METALS AND MATERIALS INTERNATIONAL
  • 2006-01 Effect of annealing time on solute carbon in ultralow-carbon Ti-V and Ti-Nb steels in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2005-04 Analysis of lattice parameter changes following deformation of a 0.19C-1.63Si-1.59Mn transformation-induced plasticity sheet steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2004-01 Quench embrittlement of hardened 5160 steel as a function of austenitizing temperature in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2002-10 Titanium nitride precipitation behavior in thin-slab cast high-strength low-alloy steels in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 2002-07 Recent developments in low-carbon sheet steels in JOM
  • 2002-06 Development of microstructural banding in low-alloy steel with simulated Mn segregation in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 1997-09 The formability of austenitic stainless steels in JOM
  • 1997-02 Controlled drawing to produce desirable hardness and microstructural gradients in alloy 302 wire in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 1996-07 Recrystallization in oxide-dispersion strengthened mechanically alloyed sheet steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 1996-05 Flow stress and microstructural evolution during hot working of alloy 22cr-13ni-5mn-0.3n austenitic stainless steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 1995-07 The sensitivity of lab-measured friction coefficients in JOM
  • 1994-06 Phosphorus and carbon segregation: Effects on fatigue and fracture of gas-carburized modified 4320 steel in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 1993-11 Temperature-Induced transition in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 1993-07 Direct viscoelastic strain in METALLURGICAL AND MATERIALS TRANSACTIONS A
  • 1992-10 Application of the bending-under-tension friction test to coated sheet steels in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 1992-10 Specimen edge effects on bending fatigue of carburized steel in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • 1992-04 Intercritically annealed and isothermally transformed 0.15 Pct C steels containing 1.2 Pct Si-1.5 Pct Mn and 4 Pct Ni: Part I. transformation, microstructure, and room-temperature mechanical properties in METALLURGICAL TRANSACTIONS A
  • 1992-04 Intercritically annealed and isothermally transformed 0.15 Pct C steels containing 1.2 Pct Si-1.5 Pct Mn and 4 Pct Ni: Part II. effect of testing temperature on stress-strain behavior and deformation-induced austenite transformation in METALLURGICAL TRANSACTIONS A
  • 1991-03 Effect of sulfur on bending fatigue of carburized steel in JOURNAL OF HEAT TREATING
  • 1990-12 Ultrasonic measurement of sheet steel texture and formability: Comparison with neutron diffraction and mechanical measurements in RESEARCH IN NONDESTRUCTIVE EVALUATION
  • 1990-09 Mechanical behavior of an intercritically annealed and isothermally transformed low C alloy steel with Ferrite-Bainite-Austenite microstructures in JOURNAL OF HEAT TREATING
  • 1990-09 Creep Behavior of Nickel-Copper Solid Solution Alloys below 0. 55 Tm in METALLURGICAL TRANSACTIONS A
  • 1990-09 Creep behavior of nickel-copper laminate composites with controlled composition gradients in METALLURGICAL TRANSACTIONS A
  • 1990-06 Deformation behavior of hot dip galvanized coatings in complex sheet metal forming in JOURNAL OF MATERIALS SHAPING TECHNOLOGY
  • 1989-07 Martensite formation, strain rate sensitivity, and deformation behavior of type 304 stainless steel sheet in METALLURGICAL TRANSACTIONS A
  • 1989 Ultrasonic Measurement of Formability in Thin Ferritic Steel Sheet in REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION
  • Affiliations

    JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "affiliation": [
          {
            "affiliation": {
              "id": "https://www.grid.ac/institutes/grid.254549.b", 
              "type": "Organization"
            }, 
            "isCurrent": true, 
            "type": "OrganizationRole"
          }
        ], 
        "familyName": "Matlock", 
        "givenName": "David K", 
        "id": "sg:person.010742200337.31", 
        "sameAs": [
          "https://app.dimensions.ai/discover/publication?and_facet_researcher=ur.010742200337.31"
        ], 
        "sdDataset": "persons", 
        "sdDatePublished": "2019-03-07T14:07", 
        "sdLicense": "https://scigraph.springernature.com/explorer/license/", 
        "sdPublisher": {
          "name": "Springer Nature - SN SciGraph project", 
          "type": "Organization"
        }, 
        "sdSource": "s3://com-uberresearch-data-dimensions-researchers-20181010/20181011/dim_researchers/base/researchers_1893.json", 
        "type": "Person"
      }
    ]
     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/person.010742200337.31'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/person.010742200337.31'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/person.010742200337.31'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/person.010742200337.31'


     




    Preview window. Press ESC to close (or click here)


    ...