International Journal of Material Forming View Homepage


Ontology type: schema:Periodical     


Journal Info

START YEAR

N/A

PUBLISHER

Springer Paris

LANGUAGE

en

HOMEPAGE

http://link.springer.com/journal/12289

Recent publications latest 20 shown

  • 2019-04-08 Investigation of tube fracture in the rotary draw bending process using experimental and numerical methods
  • 2019-04-08 Experimental and numerical studies for the gas-assisted extrusion forming of polypropylene micro-tube
  • 2019-04-03 Hot deformation behavior of 7A04 aluminum alloy at elevated temperature: constitutive modeling and verification
  • 2019-03-30 A new analytical method for determination of the flow curve for high-strength sheet steels using the plane strain compression test
  • 2019-03-30 Analysis of formability in conventional hole flanging of AA7075-O sheets: punch edge radius effect and limitations of the FLC
  • 2019-03-30 Effective location of micro joints and generation of tool path using heuristic and genetic approach for cutting sheet metal parts
  • 2019-03-30 Rheology of double-base gelled propellants as the basis for extrusion process modelling: influence of normal force on slip layer and flow curves
  • 2019-03-29 Two-way approach for deformation analysis of non-crimp fabrics in uniaxial bias extension tests based on pure and simple shear assumption
  • 2019-03-18 Effect of process parameters on the roundness of GH3030 continuously variable wall conical rotatory part formed by power spinning
  • 2019-03-05 Impact of strain rate sensitivity on the identification of the material parameters scattering and on the formability of zinc sheet
  • 2019-03-04 Characterization of heat transfer coefficient for non-isothermal elevated temperature forming of metal alloys
  • 2019-03 Investigations of tangential ultrasonic vibration turning of Ti6Al4V using finite element method
  • 2019-03 Semi-analytical models for flexure deformation in one-step simulation of sheet metal forming
  • 2019-03 A model to describe hardening behavior of Zircaloy-4 tube during cold pilgering process
  • 2019-03 Evaluating the potential of forming spot-welded layups out of fibre reinforced thermoplastic tape without previous consolidation
  • 2019-03 Numerical investigation of the combined effects of curvature and normal stress on sheet metal formability
  • 2019-03 Analysis of non-isothermal warm deep drawing of dual-phase DP600 steel
  • 2019-03 Multi-criteria optimization strategies for tree-structured production chains
  • 2019-03 Introduction to the level-set full field modeling of laths spheroidization phenomenon in α/β titanium alloys
  • 2019-03 Sensitivity analysis of the expansion process for alloy UNS N08028
  • JSON-LD is the canonical representation for SciGraph data.

    TIP: You can open this SciGraph record using an external JSON-LD service: JSON-LD Playground Google SDTT

    [
      {
        "@context": "https://springernature.github.io/scigraph/jsonld/sgcontext.json", 
        "about": [
          {
            "id": "http://scigraph.springernature.com/ontologies/product-market-codes/T22050", 
            "inDefinedTermSet": "http://scigraph.springernature.com/ontologies/product-market-codes/", 
            "name": "Manufacturing, Machines, Tools, Processes", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://scigraph.springernature.com/ontologies/product-market-codes/Z00000", 
            "inDefinedTermSet": "http://scigraph.springernature.com/ontologies/product-market-codes/", 
            "name": "Materials Science, general", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://scigraph.springernature.com/ontologies/product-market-codes/T22050", 
            "inDefinedTermSet": "http://scigraph.springernature.com/ontologies/product-market-codes/", 
            "name": "Manufacturing, Machines, Tools, Processes", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://scigraph.springernature.com/ontologies/product-market-codes/T17004", 
            "inDefinedTermSet": "http://scigraph.springernature.com/ontologies/product-market-codes/", 
            "name": "Mechanical Engineering", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://scigraph.springernature.com/ontologies/product-market-codes/T11014", 
            "inDefinedTermSet": "http://scigraph.springernature.com/ontologies/product-market-codes/", 
            "name": "Computational Intelligence", 
            "type": "DefinedTerm"
          }, 
          {
            "id": "http://scigraph.springernature.com/ontologies/product-market-codes/I23044", 
            "inDefinedTermSet": "http://scigraph.springernature.com/ontologies/product-market-codes/", 
            "name": "Computer-Aided Engineering (CAD, CAE) and Design", 
            "type": "DefinedTerm"
          }
        ], 
        "contentRating": [
          {
            "author": "snip", 
            "ratingValue": "1.378", 
            "type": "Rating"
          }, 
          {
            "author": "sjr", 
            "ratingValue": "0.536", 
            "type": "Rating"
          }, 
          {
            "author": "impact_factor_wos", 
            "dateCreated": "2017", 
            "ratingValue": "1.936", 
            "type": "Rating"
          }, 
          {
            "author": "impact_factor_wos", 
            "dateCreated": "2016", 
            "ratingValue": "1.978", 
            "type": "Rating"
          }, 
          {
            "author": "impact_factor_wos", 
            "dateCreated": "2016", 
            "ratingValue": "1.978", 
            "type": "Rating"
          }, 
          {
            "author": "impact_factor_wos", 
            "dateCreated": "2016", 
            "ratingValue": "1.978", 
            "type": "Rating"
          }, 
          {
            "author": "impact_factor_wos", 
            "dateCreated": "2015", 
            "ratingValue": "1.241", 
            "type": "Rating"
          }, 
          {
            "author": "impact_factor_wos", 
            "dateCreated": "2015", 
            "ratingValue": "1.241", 
            "type": "Rating"
          }, 
          {
            "author": "impact_factor_wos", 
            "dateCreated": "2015", 
            "ratingValue": "1.241", 
            "type": "Rating"
          }, 
          {
            "author": "impact_factor_wos", 
            "dateCreated": "2014", 
            "ratingValue": "1.081", 
            "type": "Rating"
          }, 
          {
            "author": "impact_factor_wos", 
            "dateCreated": "2014", 
            "ratingValue": "1.081", 
            "type": "Rating"
          }, 
          {
            "author": "impact_factor_wos", 
            "dateCreated": "2014", 
            "ratingValue": "1.081", 
            "type": "Rating"
          }, 
          {
            "author": "impact_factor_wos", 
            "dateCreated": "2013", 
            "ratingValue": "1.418", 
            "type": "Rating"
          }, 
          {
            "author": "impact_factor_wos", 
            "dateCreated": "2013", 
            "ratingValue": "1.418", 
            "type": "Rating"
          }, 
          {
            "author": "impact_factor_wos", 
            "dateCreated": "2013", 
            "ratingValue": "1.418", 
            "type": "Rating"
          }, 
          {
            "author": "impact_factor_wos", 
            "dateCreated": "2012", 
            "ratingValue": "0.509", 
            "type": "Rating"
          }, 
          {
            "author": "impact_factor_wos", 
            "dateCreated": "2012", 
            "ratingValue": "0.509", 
            "type": "Rating"
          }, 
          {
            "author": "impact_factor_wos", 
            "dateCreated": "2012", 
            "ratingValue": "0.509", 
            "type": "Rating"
          }
        ], 
        "description": "

    The International Journal of Material Forming is the official Journal of the European Scientific Association for material FORMing (ESAFORM) (www.esaform.org).

    The Journal publishes and disseminates original research in the field of material forming. The research should constitute major achievements in the understanding, modeling or simulation of material forming processes. In this respect \u2018forming\u2019 implies a deliberate deformation of material.

    The journal establishes a platform of communication between engineers and scientists, covering all forming processes, including sheet forming, bulk forming, powder forming, forming in near-melt conditions (injection moulding, thixoforming, film blowing etc.), micro-forming, hydro-forming, thermo-forming, incremental forming etc. Other manufacturing technologies like machining and cutting can be included if the focus of the work is on plastic deformations.

    All materials (metals, ceramics, polymers, composites, glass, wood, fibre reinforced materials, materials in food processing, biomaterials, nano-materials, shape memory alloys etc.) and approaches (micro-macro modelling, thermo-mechanical modelling, numerical simulation including new and advanced numerical strategies, experimental analysis, inverse analysis, model identification, optimization, design and control of forming tools and machines, wear and friction, mechanical behavior and formability of materials etc.) are concerned.

    Papers should describe new forming processes, experiments, models or modelling techniques, related to forming or the relation between process conditions and product properties. In general, simulation results should be validated by experiments unless the focus is purely on novel modelling techniques. New models or modelling techniques should have a broad applicability in forming simulations and should not be restricted to one particular shape.

    Results of analytical or numerical models that are not translated into new knowledge or are not supported by experimental validation will not be accepted. Similarly, submissions that describe experimental results without thorough evaluation and conclusion and thus not leading to new knowledge, will be rejected. The relevance for forming technologies and the novelty of the work should be clearly described in the abstract.

    ", "editor": [ { "familyName": "CHINESTA", "givenName": "Francisco", "type": "Person" } ], "id": "sg:journal.1136846", "inLanguage": [ "en" ], "isAccessibleForFree": false, "issn": [ "1960-6206", "1960-6214" ], "license": "Hybrid (Open Choice)", "name": "International Journal of Material Forming", "productId": [ { "name": "scopus_id", "type": "PropertyValue", "value": [ "14500154716" ] }, { "name": "nsd_ids_id", "type": "PropertyValue", "value": [ "474690" ] }, { "name": "wos_id", "type": "PropertyValue", "value": [ "1960-6206/INTERNATIONAL JOURNAL OF MATERIAL FORMING" ] }, { "name": "springer_id", "type": "PropertyValue", "value": [ "12289" ] }, { "name": "dimensions_id", "type": "PropertyValue", "value": [ "136846" ] } ], "publisher": { "name": "Springer Paris", "type": "Organization" }, "publisherImprint": "Springer", "sameAs": [ "https://app.dimensions.ai/discover/publication?and_facet_source_title=jour.1136846" ], "sdDataset": "journals", "sdDatePublished": "2019-03-18T11:05", "sdLicense": "https://scigraph.springernature.com/explorer/license/", "sdPublisher": { "name": "Springer Nature - SN SciGraph project", "type": "Organization" }, "sdSource": "file:///home/ubuntu/piotr/scigraph_export/journals_20190313_sn_only.jsonl", "type": "Periodical", "url": "http://link.springer.com/journal/12289" } ]

     

    Download the RDF metadata as:  json-ld nt turtle xml License info

    HOW TO GET THIS DATA PROGRAMMATICALLY:

    JSON-LD is a popular format for linked data which is fully compatible with JSON.

    curl -H 'Accept: application/ld+json' 'https://scigraph.springernature.com/journal.1136846'

    N-Triples is a line-based linked data format ideal for batch operations.

    curl -H 'Accept: application/n-triples' 'https://scigraph.springernature.com/journal.1136846'

    Turtle is a human-readable linked data format.

    curl -H 'Accept: text/turtle' 'https://scigraph.springernature.com/journal.1136846'

    RDF/XML is a standard XML format for linked data.

    curl -H 'Accept: application/rdf+xml' 'https://scigraph.springernature.com/journal.1136846'


     

    This table displays all metadata directly associated to this object as RDF triples.

    191 TRIPLES      20 PREDICATES      47 URIs      38 LITERALS      26 BLANK NODES

    Subject Predicate Object
    1 sg:journal.1136846 schema:about sg:ontologies/product-market-codes/I23044
    2 sg:ontologies/product-market-codes/T11014
    3 sg:ontologies/product-market-codes/T17004
    4 sg:ontologies/product-market-codes/T22050
    5 sg:ontologies/product-market-codes/Z00000
    6 schema:contentRating N1529238f5b914e95b13b03548f30868a
    7 N15afee0aed7f4b678dc9792bc9739f9e
    8 N173e3085faec4db287e4614880f03005
    9 N1b19695c50ed4a92af449e7fdedcbd91
    10 N24da875b12234b27aa4bdfef2ab54200
    11 N2a5a60f4de074d749a832c86181e7ed5
    12 N3f8918d09db44f5a956b475fde7e075d
    13 N8f2ac55c031c45088a7b6491ae69b7df
    14 N8fa0c8b26848428b9b3595cf139e8726
    15 N9661e3f58c974974b00a16aef69832e5
    16 Na4a1f4edf41b4d31a405fa5dd3756b38
    17 Nad847d8cb1534e89854f8e9b8b58090f
    18 Nae5d31d3fd6c40778526f0aafc0aa7b2
    19 Nbda289d51ff44e119c15fb7c0a5e596a
    20 Ncc361b21083946349ed87e9d042188a6
    21 Ndd9ab57a6e2546d8bc5054988e8a79a9
    22 Neb2e7f86f6364670871ed4de9c6eff2b
    23 Nfe42ac7bfb804cf0b74cf81419eabd4a
    24 schema:description <p>The International Journal of Material Forming is the official Journal of the European Scientific Association for material FORMing (ESAFORM) (www.esaform.org).</p><p>The Journal publishes and disseminates original research in the field of material forming. The research should constitute major achievements in the understanding, modeling or simulation of material forming processes. In this respect ‘forming’ implies a deliberate deformation of material. </p><p>The journal establishes a platform of communication between engineers and scientists, covering all forming processes, including sheet forming, bulk forming, powder forming, forming in near-melt conditions (injection moulding, thixoforming, film blowing etc.), micro-forming, hydro-forming, thermo-forming, incremental forming etc. Other manufacturing technologies like machining and cutting can be included if the focus of the work is on plastic deformations.</p><p>All materials (metals, ceramics, polymers, composites, glass, wood, fibre reinforced materials, materials in food processing, biomaterials, nano-materials, shape memory alloys etc.) and approaches (micro-macro modelling, thermo-mechanical modelling, numerical simulation including new and advanced numerical strategies, experimental analysis, inverse analysis, model identification, optimization, design and control of forming tools and machines, wear and friction, mechanical behavior and formability of materials etc.) are concerned. </p><p>Papers should describe new forming processes, experiments, models or modelling techniques, related to forming or the relation between process conditions and product properties. In general, simulation results should be validated by experiments unless the focus is purely on novel modelling techniques. New models or modelling techniques should have a broad applicability in forming simulations and should not be restricted to one particular shape. </p><p>Results of analytical or numerical models that are not translated into new knowledge or are not supported by experimental validation will not be accepted. Similarly, submissions that describe experimental results without thorough evaluation and conclusion and thus not leading to new knowledge, will be rejected. The relevance for forming technologies and the novelty of the work should be clearly described in the abstract.</p><p/>
    25 schema:editor N7014add3eced448d8f098ccd13406023
    26 schema:inLanguage en
    27 schema:isAccessibleForFree false
    28 schema:issn 1960-6206
    29 1960-6214
    30 schema:license Hybrid (Open Choice)
    31 schema:name International Journal of Material Forming
    32 schema:productId N3c518c9436604271ab926479af051f67
    33 N9efb49feefde4a9bae5849dbae68ca9b
    34 Nc11dac30d77d4a2aae3c0c3eb3fd3ffc
    35 Ndddc3c66cc61432e86902f3b18874759
    36 Nf2f3d029162841d69a8411d08dcd08d9
    37 schema:publisher Nf06c76b5b10a425e8a9920a44071da7c
    38 schema:publisherImprint Springer
    39 schema:sameAs https://app.dimensions.ai/discover/publication?and_facet_source_title=jour.1136846
    40 schema:sdDatePublished 2019-03-18T11:05
    41 schema:sdLicense https://scigraph.springernature.com/explorer/license/
    42 schema:sdPublisher N62f50133d3204d99b98b29a4b9a13689
    43 schema:url http://link.springer.com/journal/12289
    44 sgo:license sg:explorer/license/
    45 sgo:sdDataset journals
    46 rdf:type schema:Periodical
    47 N0298cee476124afa8ae732b0bf37a4e0 rdf:first impact_factor_wos
    48 rdf:rest rdf:nil
    49 N12327cf2b0154414a80dc0718c2666ae rdf:first impact_factor_wos
    50 rdf:rest rdf:nil
    51 N1529238f5b914e95b13b03548f30868a schema:author N8b0843c882cc4880bdbdd4273baa8860
    52 schema:dateCreated 2015
    53 schema:ratingValue 1.241
    54 rdf:type schema:Rating
    55 N15afee0aed7f4b678dc9792bc9739f9e schema:author N315be39af8d842a3970ce6b6b3189c68
    56 schema:dateCreated 2013
    57 schema:ratingValue 1.418
    58 rdf:type schema:Rating
    59 N173e3085faec4db287e4614880f03005 schema:author Nc2d9c5afe2b44a8d8a7947f5c606288f
    60 schema:ratingValue 0.536
    61 rdf:type schema:Rating
    62 N1acc26323ad84fd8a0d1cf8e968f8d69 rdf:first impact_factor_wos
    63 rdf:rest rdf:nil
    64 N1b19695c50ed4a92af449e7fdedcbd91 schema:author Nd4ed9010f83149b58d2faa9656e237d1
    65 schema:dateCreated 2015
    66 schema:ratingValue 1.241
    67 rdf:type schema:Rating
    68 N24da875b12234b27aa4bdfef2ab54200 schema:author N725ea3f045d44ccb800663fe03a3be61
    69 schema:dateCreated 2013
    70 schema:ratingValue 1.418
    71 rdf:type schema:Rating
    72 N2717a234e65e4c58a9d5267aebf67090 rdf:first impact_factor_wos
    73 rdf:rest rdf:nil
    74 N2a5a60f4de074d749a832c86181e7ed5 schema:author N2717a234e65e4c58a9d5267aebf67090
    75 schema:dateCreated 2013
    76 schema:ratingValue 1.418
    77 rdf:type schema:Rating
    78 N315be39af8d842a3970ce6b6b3189c68 rdf:first impact_factor_wos
    79 rdf:rest rdf:nil
    80 N396dd966bdb24637a79c2360fea68102 schema:familyName CHINESTA
    81 schema:givenName Francisco
    82 rdf:type schema:Person
    83 N3acc192cdbe1436fa3177c9b011c076f rdf:first impact_factor_wos
    84 rdf:rest rdf:nil
    85 N3c518c9436604271ab926479af051f67 schema:name wos_id
    86 schema:value 1960-6206/INTERNATIONAL JOURNAL OF MATERIAL FORMING
    87 rdf:type schema:PropertyValue
    88 N3f8918d09db44f5a956b475fde7e075d schema:author N1acc26323ad84fd8a0d1cf8e968f8d69
    89 schema:dateCreated 2012
    90 schema:ratingValue 0.509
    91 rdf:type schema:Rating
    92 N421589e550bd4cc0a2976e0f57342dce rdf:first impact_factor_wos
    93 rdf:rest rdf:nil
    94 N62f50133d3204d99b98b29a4b9a13689 schema:name Springer Nature - SN SciGraph project
    95 rdf:type schema:Organization
    96 N6956dc14c8c34a1d970b7a4a8821b7dd rdf:first snip
    97 rdf:rest rdf:nil
    98 N7014add3eced448d8f098ccd13406023 rdf:first N396dd966bdb24637a79c2360fea68102
    99 rdf:rest rdf:nil
    100 N725ea3f045d44ccb800663fe03a3be61 rdf:first impact_factor_wos
    101 rdf:rest rdf:nil
    102 N8b0843c882cc4880bdbdd4273baa8860 rdf:first impact_factor_wos
    103 rdf:rest rdf:nil
    104 N8f2ac55c031c45088a7b6491ae69b7df schema:author Nad6e4d97ae344bf9865a6749028dab63
    105 schema:dateCreated 2012
    106 schema:ratingValue 0.509
    107 rdf:type schema:Rating
    108 N8fa0c8b26848428b9b3595cf139e8726 schema:author Na74b20ca452d41bf83e0b8f65737dc74
    109 schema:dateCreated 2016
    110 schema:ratingValue 1.978
    111 rdf:type schema:Rating
    112 N9661e3f58c974974b00a16aef69832e5 schema:author N12327cf2b0154414a80dc0718c2666ae
    113 schema:dateCreated 2016
    114 schema:ratingValue 1.978
    115 rdf:type schema:Rating
    116 N9c7936f265374056b94a470da586d15a rdf:first impact_factor_wos
    117 rdf:rest rdf:nil
    118 N9efb49feefde4a9bae5849dbae68ca9b schema:name scopus_id
    119 schema:value 14500154716
    120 rdf:type schema:PropertyValue
    121 Na4a1f4edf41b4d31a405fa5dd3756b38 schema:author N9c7936f265374056b94a470da586d15a
    122 schema:dateCreated 2017
    123 schema:ratingValue 1.936
    124 rdf:type schema:Rating
    125 Na74b20ca452d41bf83e0b8f65737dc74 rdf:first impact_factor_wos
    126 rdf:rest rdf:nil
    127 Nad6e4d97ae344bf9865a6749028dab63 rdf:first impact_factor_wos
    128 rdf:rest rdf:nil
    129 Nad847d8cb1534e89854f8e9b8b58090f schema:author N421589e550bd4cc0a2976e0f57342dce
    130 schema:dateCreated 2014
    131 schema:ratingValue 1.081
    132 rdf:type schema:Rating
    133 Nae5d31d3fd6c40778526f0aafc0aa7b2 schema:author N3acc192cdbe1436fa3177c9b011c076f
    134 schema:dateCreated 2016
    135 schema:ratingValue 1.978
    136 rdf:type schema:Rating
    137 Nb22db700ce274563802114bcd56d6dd8 rdf:first impact_factor_wos
    138 rdf:rest rdf:nil
    139 Nbda289d51ff44e119c15fb7c0a5e596a schema:author N6956dc14c8c34a1d970b7a4a8821b7dd
    140 schema:ratingValue 1.378
    141 rdf:type schema:Rating
    142 Nc11dac30d77d4a2aae3c0c3eb3fd3ffc schema:name springer_id
    143 schema:value 12289
    144 rdf:type schema:PropertyValue
    145 Nc2d9c5afe2b44a8d8a7947f5c606288f rdf:first sjr
    146 rdf:rest rdf:nil
    147 Ncc361b21083946349ed87e9d042188a6 schema:author Nb22db700ce274563802114bcd56d6dd8
    148 schema:dateCreated 2015
    149 schema:ratingValue 1.241
    150 rdf:type schema:Rating
    151 Nd4ed9010f83149b58d2faa9656e237d1 rdf:first impact_factor_wos
    152 rdf:rest rdf:nil
    153 Ndd9ab57a6e2546d8bc5054988e8a79a9 schema:author N0298cee476124afa8ae732b0bf37a4e0
    154 schema:dateCreated 2012
    155 schema:ratingValue 0.509
    156 rdf:type schema:Rating
    157 Ndddc3c66cc61432e86902f3b18874759 schema:name dimensions_id
    158 schema:value 136846
    159 rdf:type schema:PropertyValue
    160 Ne45eba61cbd040fa90b4b0a8e53e1291 rdf:first impact_factor_wos
    161 rdf:rest rdf:nil
    162 Ne8a0ab98390b4eebb042bb7398b9c847 rdf:first impact_factor_wos
    163 rdf:rest rdf:nil
    164 Neb2e7f86f6364670871ed4de9c6eff2b schema:author Ne8a0ab98390b4eebb042bb7398b9c847
    165 schema:dateCreated 2014
    166 schema:ratingValue 1.081
    167 rdf:type schema:Rating
    168 Nf06c76b5b10a425e8a9920a44071da7c schema:name Springer Paris
    169 rdf:type schema:Organization
    170 Nf2f3d029162841d69a8411d08dcd08d9 schema:name nsd_ids_id
    171 schema:value 474690
    172 rdf:type schema:PropertyValue
    173 Nfe42ac7bfb804cf0b74cf81419eabd4a schema:author Ne45eba61cbd040fa90b4b0a8e53e1291
    174 schema:dateCreated 2014
    175 schema:ratingValue 1.081
    176 rdf:type schema:Rating
    177 sg:ontologies/product-market-codes/I23044 schema:inDefinedTermSet sg:ontologies/product-market-codes/
    178 schema:name Computer-Aided Engineering (CAD, CAE) and Design
    179 rdf:type schema:DefinedTerm
    180 sg:ontologies/product-market-codes/T11014 schema:inDefinedTermSet sg:ontologies/product-market-codes/
    181 schema:name Computational Intelligence
    182 rdf:type schema:DefinedTerm
    183 sg:ontologies/product-market-codes/T17004 schema:inDefinedTermSet sg:ontologies/product-market-codes/
    184 schema:name Mechanical Engineering
    185 rdf:type schema:DefinedTerm
    186 sg:ontologies/product-market-codes/T22050 schema:inDefinedTermSet sg:ontologies/product-market-codes/
    187 schema:name Manufacturing, Machines, Tools, Processes
    188 rdf:type schema:DefinedTerm
    189 sg:ontologies/product-market-codes/Z00000 schema:inDefinedTermSet sg:ontologies/product-market-codes/
    190 schema:name Materials Science, general
    191 rdf:type schema:DefinedTerm
     




    Preview window. Press ESC to close (or click here)


    ...